HOMELEGANCE 1444-1 Queen Wood Panel Bed Instruction Manual
- June 1, 2024
- HOMELEGANCE
Table of Contents
HOMELEGANCE 1444-1 Queen Wood Panel Bed
Product Specifications
- Item No: 1444-1 Queen Headboard / 1444K-1 King Headboard
- Material: Wood
- Country of Origin: Malaysia
- Recommended Use: Indoor
Product Usage Instructions
Assembly Instructions
Thank you for purchasing our product. Please follow the steps below for assembly:
Step 1: Headboard Assembly
- Identify all parts from the part list provided.
- Use the Allen Key to connect the Headboard to the LSF and RSF Headboard Legs using the M4 x 60mm Connection Bolt.
- Ensure all connections are tight and retighten if necessary.
Step 2: Queen Bed Assembly
- Attach the Queen Footboard and Slats to the Headboard using the provided hardware (M4 x 32mm Screws).
- Connect the Queen Support Legs to the Footboard and Slats using Wood Dowels (M10 x 30mm).
- Check all connections and tighten if needed.
Step 3: King Bed Assembly
- Follow similar steps as Queen Bed Assembly but adjust for King-sized components.
Frequently Asked Questions
- Q: What should I do if I find parts missing during assembly?
- A: If any parts are missing, please contact your dealer immediately, and they will be sent to you promptly.
- Q: How often should I check the hardware for tightness?
- A: It is recommended to periodically check all connections to ensure they are tight. If any hardware is loose, retighten as needed to maintain stability.
Parts Discription
Queen Bed
Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed, have your dealer contact us and they will be sent to you immediately
- It is recommended to install protective pads under all legs and support to avoid damage or scratches when placing furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration if placing on carpet.
- Hardware may loosen over time. Periodically check to make sure all connections are tight. Retighten if necessary
PART LIST
HARDWARE LIST
ABOVE HARDWARE ARE PACKED IN 1444/K-1 FOR ASSEMBLY
King Bed
Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed, have your dealer contact us and they will be sent to you immediately.
- It is recommended to install protective pads under all legs and support to avoid damage or scratches when placing furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration if placing on carpet.
- Hardware may loosen over time. Periodically check to make sure all connections are tight. Retighten if necessary.
PART LIST
HARDWARE LIST
ABOVE HARDWARE ARE PACKED IN 1444-3 FOR ASSEMBLY
ASSEMBLY INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>