HOMELEGANCE 1422N-6 Dresser Bureau Double Mirror Instruction Manual
- June 17, 2024
- HOMELEGANCE
Table of Contents
1422N-6 Dresser Bureau Double Mirror
ITEM NO: 1422N-5 DRESSER
1422N-6 MIRROR
Thank you for purchasing this product. Please take time to read and follow
instructions below.
Check that you have all parts and hardware before assembly. Parts apparently
missing are often found in packing matterials. If you do not have all parts
listed, have your dealer contact us and they will be sent to you immediately.
It is recommended to install protective pads under all legs and supports to
avoid damage or A scratches when placing furniture on a wood floor or other
hard surface, and to limit indentation and prevent discoloration if placing on
carpet.
Hardware may loosen over time. Periodically check to make sure all connections
are tight.
Re-tighten if necessary.
NOTE
Tipping restraint hardware kit is includedwith this product. Refer to
installation instruction in the hardware pack.
‘ANTI-TIPPING HARDWARE PACK IS AT THE BACK PANEL.
1422N-5 PART LIST
NO| SKETCH| DESCRIPTION| Q’TY
1| | DRESSER| 1PC
1422N-6 PART LIST
2| | MIRROR| 1PC
3| | MIRROR SUPPORT| 2PCS
HARDWARE LIST
| NO | SKETCH | DESCRIPTION | SIZE | Q’TY |
|---|---|---|---|---|
| A | TIPPING RESTRAINT | 1SET |
ABOVE HARDWARE ARE PACKED IN #1422N-5 FOR ASSEMBLY
1422N-6 HARDWARE LIST / LISTE DE QUINCAILLERIE
NO| SKETCH| DESCRIPTION| SIZE| Q’TY
B| | BOLT| 01/4″ ” 38mm| BPCS
C| | SPRING WASHER| 01/4″ 131.5mm| 8PCS
D| | FLAT WASHER| 01/4″ 19″1.5mm| 8PCS
E| | ALLEN KEY| M474mm| 1PC
*ABOVE HARDWARE ARE PACKED IN #1422N-6 FOR ASSEMBLY Step 1
Step 2
COMPLETED
MADE IN VIETNAM
Documents / Resources
|
HOMELEGANCE 1422N-6 Dresser Bureau Double
Mirror
[pdf] Instruction Manual
1422N-6, 1422N-6 Dresser Bureau Double Mirror, Dresser Bureau Double Mirror,
Bureau Double Mirror, Double Mirror, Mirror
---|---