HIRALIY Wifi Automatic Drip Irrigation System User Manual
- June 1, 2024
- HIRALIY
Table of Contents
WIFI AUTOMATIC
WATERING SYSTEM
USER MANUAL 5G/2.4G
DUAL BAND
FTALSTHIT UNOA ONINOOTS
Product Appearance
NO. | Name | NO. | Name |
---|---|---|---|
1 | Water Outlet | 5 | Manual Button |
2 | Water Inlet | 6 | Hook |
3 | Water Shortage Alarm | 7 | Charging Port |
4 | WiFi Pairing Button | 8 | Battery Compartment |
Accessories Included
Accessories Included | Name | PCS |
---|
| 1/4 black PVC tube| 32.8Ft
| Filter| 1
| Check valve| 1
| Drip emmiter| 15
| Tee Fitting| 3
| Plug| 4
| Power Cable| 1
| Power Adapter| 1
Specification
Water Shortage Alarm | App Notification Reminder & Machine Light Flashing |
---|---|
Watering Frequency | Daily Cycle/Weekly Cycle |
Watering Flow | 850ml/min (+5%) |
Suggested Maximum Irrigation Time | ≤15min |
Working Temperature | 0-45°C |
Power by | USB Cable (Included) or 4*AA Alkaline Batteries (excluded) |
Power adapter | DC5V2A |
Wifi Connection | 2.4G/5G |
Easy to Compair WIFI
Stepl. Powered the pump with USB cable for WIFI connection.
Note: Pairing WIFI and accessing APP requires high current support,
please make sure the USB cable is powered on before pairing. Light Flashing
Guide
Flashes always on | Watering |
---|---|
Flashes always on | Network connected |
Flashes quickly | No network |
Pressand hold 5 seconds | Remove device |
Flashes quickly | Lack water |
Step2.Initial HIRALIY App setup
2.1 Search for “smartlife” and download Android version or iOS version App for
free. Or scan the QR code and download it.
https://smartapp.tuya.com/smartlife
2.2 Create an account and login with an existing account to begin pairing with
WIFI water pump. ![HIRALIY Wifi Automatic Drip Irrigation System
- setup 1](https://manuals.plus/wp-content/uploads/2024/04/HIRALIY-Wifi- Automatic-Drip-Irrigation-System-setup-1.png)
Easy to Assemble
Step 1. Plugin the USB cable. Note:
When both power modes are used simultaneously, it will prioritize the use of
adapter power supply. When the adapter loses power, The battery-powered mode
will be activated.
Step2. Insert 4 brand new AA alkaline batteries.
Batteries can allow devices to continue watering plans after a sudden power
outage at home. But battery-power mode is only suitable for manual watering
and timed watering that have been set to run. It cannot be remotely controlled
Note:
Whenitisidle, please remove the batteries and store it properly. Used up or
dead batteries must be removed from the pump and disposed of properly.
Please replace the batteries properly when receiving a low battery message
from the App.
Step3. Attach the hose to the filter, and put it into the container.
Step4. Connect the hose to
water inlet and outlet. Step5. Connect the check valve to the water outlet
near the pump.
(Please install correctly in accordance with the flow direction.) Step6. Connect the tee fitting. Step7. Attach
the hose to the drip emmiter, and insert it at least 2 inches deep into the
soil.
Tip:Insert a plug at the last fitting. Turn clockwise to
increase the flow rate; Turn counter- clockwise to reduce flow rate.
Application Interface Overview
Q&A
Q1: Is it necessary to adjust the router settings when the home router is 5G/2.4G?
Al: This device adopts a brand new dual mode solution, which can perfectly pair both 5G and 2.4G.
Q2:What should I do if the end dripper does not spray water?
A2: Please rotate the front dripper to evenly distribute flow.
Q3:What should I do if no water comes out of each dripper?
A3: Check if the inlet and outlet hoses are blocked, and promptly clean them if any blockage occurs.
Q4: What should I do if there is water leakage at the hose connection?
A4:Cut the hose as flat as possible and check if the connection is fully inserted. If not, please press the blue part to remove and reinsert it.
If the user manual does not have what you are looking for or need some help, please contact us on Amazon before returning the product to the store.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>