OneGame OG6602 Video Gaming Chair Instruction Manual

June 1, 2024
OneGame

OneGame OG6602 Video Gaming Chair 0G6602
Assembly Instructions

OG6602 Video Gaming Chair

INSTALLATION VIDEOhttps://aftersale.qingtong123.com/landingpage/index.html?landing_page_id=185

Accessories List

OneGame OG6602 Video Gaming Chair - Accessories list CAUTION [pif you have any questions, please contact OneGameAMZ@gmail.com] * Do not stand on the chair or use it as a ladder, only as a chair.

  • This chair is designed to be used by one person at a time.
  • This chair is designed for a single person weighing up to 330LBS (150kg) .
  • Do not use this chair unless all bolts, screws and knobs are tightened.
  • Failure to follow these instructions could result in serious injury or death to you and others.
  • Some parts are heavy and/or have sharp edges, please install with care to avoid injury to yourself and others.

Instructions for Use

OneGame OG6602 Video Gaming Chair - assemblyThank you for purchasing our products. Please read these instructions before assembly.
And please assemble in the correct order. After assembly, please keep the instructions carefully. Make sure that all parts are included (20 types in total).

Assembly Instruction

Step 1
Turn the Base(8) upside down, insert Base Legs(7) one by one to the Base(8), then tighten them with 10 Screws(20) by the Wrench(15).OneGame OG6602 Video
Gaming Chair - assembly 1 Step 2
Insert Casters(10) into the Base Legs(7). Then insert Gas Lift(5) into the hole in the center of the Base(8).OneGame OG6602 Video Gaming Chair -
assembly 2 Step 3
Put Screw Washers(13) and Spring washers(14) on each Screws(18). Then use them to attach the Back Bar(4) to the Chair Back(1) by Wrench(15).OneGame OG6602
Video Gaming Chair - assembly 3 Step 4
Attached the Armrests(3) to the Seat(2) with 2 Serews(17) by Wrench(15). Secure Base Plate(9) to Seat(2) with 4 Screws(16).

OneGame OG6602 Video Gaming Chair - assembly 4 Step 5
Insert the Back Bar(4) into the hole at the back of the Seat(2), then tighten them with 3 Screws(19) by Wrench (15).
Attach the Back Bar Cover(6) to the Chair Back by pushing the buckle into the slot.
Finally, remove the Headrest(11) and Lumbar Pillow(12). Strap the Headrest(11) to the top of the chair and place the Lumbar Pillow(12) at the lumbar position of the chair. OneGame OG6602 Video Gaming Chair - assembly
5Activate your guarantee now!
Please scan the QR code to activate the warranty for better customer service as a priority. We guarantee that you will have a pleasant buying experience. https://aftersale.qingtong123.com/landingpage/index.html?landing_page_id=185

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals