PEYOU BTS300 Portable Waterproof Wireless Speaker User Manual
- June 6, 2024
- PEYOU
Table of Contents
Portable Waterproof Wireless speakers
Operation Manual
Thank you for purchasing the Waterproof Wireless Speaker.
Please read all instructions carefully before using and retain this manual for
future use and reference.
SAFETY INSTRUCTIONS
Keep the unit away from heat sources, direct sunlight, and corrosive liquid.
Do not use the unit if it has been dropped or damaged in any way. Repairs to
electrical equipment should only be performed by a qualified electrician.
Improper repairs may place users at serious risk. Do not puncture or harm the
exterior surface of the production in any way.
Keep the unit free from dust, lint, etc.
Do not use this unit for anything other than its intended use or purpose.
Doing so may damage the device.
This product is not a toy.
Keep out of reach of children.
Do not use the unit at excessive levels as this may damage hearing.
Do not expose batteries, battery pack, or batteries installed to excessive
heat, such as direct sunlight, or open flame.
NOTE: DO NOT SUBMERGE THE SPEAKER
PACKAGE CONTENTS
- Portable Wireless Speaker
- Micro USB Charging Cable
- Aluminum Carabiner
- Operation Manual
KEY FEATURES
- Built-in rechargeable battery
- Volume control
- Built-in Microphone
- Suction Cup
- Aluminum Carabiner
KEYS
1. Power / Pairing
3. Volume – / Previous
5. Microphone
7. USB Charge Port| 2. Play / Pause
4. Hands-free
6. Volume+ / Next
---|---
CHARGING THE SPEAKER
The speaker comes with a built-in rechargeable battery. Before using it for
the first time, we recommend you charge the battery fully. Only use the
supplied USB cable to charge the speaker.
Connect the USB cable to a computer USB port and the Micro USB plug to the
charging port of the speaker. The red LED light
will illuminate while the speaker is charging. A full charge of the battery
takes around 2 hours. When the battery is fully charged the LED light will
turn off. Disconnect the speaker at this point. The speaker will then be ready
for use.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>