iroda CT-6101 Professional Butane Torch Instruction Manual

iroda CT-6101 Professional Butane Torch

IMPORTANT SAFETY INSTRUCTIONS

Please read the following safety instructions carefully before using the product:

• Use outdoors only or in well-ventilated areas.
• Keep young children away from the appliance as accessible parts may be very hot.
• Read the instructions before using the appliance.

DESCRIPTION

The CT-610KB Professional Butane Torch is a versatile tool designed for various applications. It comes with 3 interchangeable nozzles: CT-6101 Pin Point Flame Nozzle, CT-6103 Swirl Flame Nozzle, and CT-6104 Hot Blower. The torch features an interchangeable nozzle locking nut, a safety latch trigger, and an open/close regulator. It also includes an attachable tabletop stand and a safety stand for hands-free operation.

PRODUCT SPECIFICATIONS

• Dimensions:
  • Length : 198 mm (7.8 inches)
  • Height: 218 mm (8.6 inches)
  • Grip Diameter : 50 mm (2 inches)
  • Base Diameter: 80 mm (3.1 inches)
• Weight: Empty Fuel Tank – 325 g (11.5 oz)
• Fuel: Butane
• Operating Time (Mid Setting) : 50 min
• Flame Length (Mid Setting): 2.5 cm (1 inch)

IMPORTANT SAFETY INSTRUCTIONS

Warnings:

• Read instructions before use.
• DO NOT refill, ignite, or use near open flame, heater, furnace, or combustible materials.
• KEEP AWAY FROM CHILDREN.
• Only use high-quality butane gas.
• Be aware that the Flame Nozzle of the torch can get extremely hot during use.
• Do not touch the nozzle during use, or before sufficient time has passed for cooling.
• Always be sure the unit is cool before storing.
• Store properly when not in use.
• Keep in a dry place, out of the reach of children.
• DO NOT expose to heat above 120°F (50°C) and avoid prolonged exposure to the sun.
• If your CT-610 malfunctions do not try to repair. Contact your dealer or online support for help.

DESCRIPTION

HOW TO USE THE CT-610

CONNECTING GAS CARTRIDGE TO TORCH

• Connect and disconnect the Torch Head to the Gas Cartridge while outdoors or in a well-ventilated area.
  • Ensure that the OPEN/CLOSE Regulator is turned off (turned fully clockwise).
  • Place the torch head valve on top of the Gas Cartridge valve. (Fig. 1)
  • Gently screw the Gas Cartridge into the Torch Head. Be careful not to cross-thread the Torch to the Cartridge.

CAUTION: Screw on hand tight only. Do not over tighten or you will damage the torch seals and gas cartridge seals.

REFILLING

• Use only high-quality butane gas.
• Refill in a well-ventilated area away from any ignition source and other people.
  • Hold butane canister upside down when filling (Fig. 2)
  • Firmly press nozzle of butane fuel into the Filling Valve.
  • Stop filling when gas overflows. (Gas overflow during refilling is normal and does not indicate a leak.)
  • Wait for a few minutes before use for gas to stabilize.

IGNITION

1. Turn the OPEN/CLOSE Regulator counterclockwise approx. 1/2 turn to start the gas flow.
2. Press the Safety Latch and Trigger together to ignite the torch.
3. For continuous flame, slide the Hands-free Lock to the HOLD position. Then release the Safety Latch and Trigger.
4. To extinguish the flame, slide the Hand-frees Lock to OFF position and turn the Control Regulator clockwise to the closed position to turn off the gas.
   • You can use the Attachable Tabletop Stand for better stability Fig.4 and multiple angles use during operation. (Fig. 4)

HOW TO CHANGE NOZZLE

1. Be sure the nozzle is cool before removal.
2. Turn the Locking Nut counterclockwise to unscrew and remove the Interchangeable Nozzle.
3. Install the desired nozzle into the body by aligning the Protrusion on the Nozzle with the Notch in the Torch Body (Fig. 5)
4. Carefully push the nozzle into the body (Fig. 6).
5. Gently screw the Locking Nut on the threads. Be careful not to overtighten as it could damage the nozzle assembly and threads in the body.

TROUBLE SHOOTING

To reduce the risk of personal injury, property damage, or damage to your CT-610, do not attempt to repair the unit body.

the Hands-Free Lock to OFF position
Does not Ignite/no flame| Empty Gas cartridge| Refill with butane fuel

SPECIAL WARNING

• This product, when used for soldering and similar applications, produces chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
• Department of Transportation Hazardous Materials Regulations forbid the carriage of butane or other flammable gas products on passenger aircraft. Do not pack this item or any other flammable gas item, in any checked or carry-on baggage.

SPECIFICATIONS

This appliance may be filled with any cartridges marked “Butane” complying with EN 417.
Warning:

• Use outdoors only or use in well ventilated areas.
• Read the instructions before using the appliance.

CAUTION:

• Accessible parts may be very hot. Keep young children away from the appliance.

www.pro-iroda.com

References

• Iroda Homepage - High Quality Butane Hand Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>