Shenzhen Chuangzhan Hong Electronic Technology Co Ltd CZH B010 HEAD True Wireless Speaker User Manual
Table of Contents
Shenzhen Chuangzhan Hong Electronic Technology Co Ltd CZH B010 HEAD True
Wireless Speaker
Product Information
- Model: CZH B010
- Power Output: 60-80W
- Battery Capacity: 6800 mAh
- Waterproof Rating: IPX7
- Dimensions: 15 x 5.3 x 15 inches
Product Usage Instructions
- Charging
- To charge your speaker, connect it to a power source using the provided USB-A charging cable.
- You can also charge your USB devices by connecting them to the USB-A charging port on the speaker.
- Powering On/Off
- To power on the speaker, press and hold the power button until the LED indicator lights up.
- To power off the speaker, press and hold the power button until the LED indicator turns off.
Using Your Speaker
Bluetooth Mode
- Turn on the speaker and enable Bluetooth on your device.
- Select the speaker from the list of available devices to pair and connect.
True Wireless Stereo Mode
In this mode, you can pair two speakers for a stereo sound experience.
Follow the pairing instructions in the manual to set up True Wireless Stereo
mode.
Button Controls
The speaker features various button controls for volume adjustment,
play/pause, and skipping tracks. Refer to the user manual for detailed button
functions.
Specifications
- Battery Capacity: 6800 mAh
- Power Output: 60-80W
- Waterproof Rating: IPX7
- Dimensions: 15 x 5.3 x 15 inches
Caution
- Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to certain conditions regarding interference.
- This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
FAQ
- Q: How do I reset the speaker?
A: To reset the speaker, press and hold the power button for 10 seconds until the LED indicators flash.
CZH B010
USER MANUAL
At a Glance
- Bass button
- Volume down button
- Volume up button
- USB-C port for charging in
- Bluetooth button
- Multi-function button
- Power button
- USB-A port for charging out
Charge your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from the charger when fully charged. Do not charge for extended periods
Charge your USB Devices
Charge your USB devices through the USB-A charging port.
Powering On/Off
This speaker will power off automatically after 30 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled
devices.
Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
(True Wireless Stereo)
Two identical Soundcore speakers can pair up with each other for true wireless
stereo sound. In mode, connect either one of the two speakers with your
mobile device so that both speakers play the same audio (one as L channel and
the other as channel).
On both Soundcore speakers, press the {9} button to enter pairing mode.
- The speakers start searching for each other to establish the connection. The LED indicator on both speakers will flash white.
- Once successfully connected, the LED indicator on both speakers will become steady white.
-
Press
-
Flashing white
-
Steady white
-
Enter pairing mode
-
pairing
-
connected
-
Press Play/Pause
-
Press twice Next track
-
Press three times Previous track
-
Press or press and hold Adjust volume
-
Press Turn BassUp on/off
Specifications
Specifications are subject to change without notice.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>