ellipse SECURITY USW-Flex-Utility Outdoor Enclosure User Guide

ellipse SECURITY USW-Flex-Utility Outdoor Enclosure

Product Information

Specifications:

• Package Contents:
  • Enclosure
  • Wall/Pole Mount
  • 60W PoE Adapter
  • Mounting Screws (Qty. 4)
  • Screw Anchors (Qty. 4)
  • Torx Security Screw (Qty. 1)
  • Philips Security Screw (Qty. 1)
  • RJ45 Cable
  • Metal Strap
• Installation Requirements:
  • Flathead screwdriver
  • Phillips screwdriver
  • Pliers
  • Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections.

Product Usage Instructions

Hardware Overview:

• PoE Adapter:
  • PoE OUT: Connect the provided RJ45 cable to this port and port 1 on the USW-Flex to provide power to the USW-Flex.
• Terminal Block:
  • Used to connect AC power source to the PoE Adapter. L should connect to positive, ground connects to the middle, and N should be the neutral connection.
• LED:
  • Lights white when properly connected to a power source.

Hardware Installation

1. Follow the instructions provided in the USW-Flex-UtilityQuick Start Guide for hardware installation.

Connecting the Switch:

1. Refer to steps 1-10 in the USW-Flex-UtilityQuick Start Guide for connecting the switch.

Wall Mounting:

1. Refer to steps 1-4 in the USW-Flex-UtilityQuick Start Guide for wall mounting instructions.

Pole Mounting:

1. Refer to steps 1-2 in the USW-Flex-UtilityQuick Start Guide for pole mounting instructions.

Optional: Secure the enclosure:

1. Use the included Torx or Phillips Security Screw to secure the enclosure.

Frequently Asked Questions (FAQ)

Q: What should I use for wired Ethernet connections?

A: We recommend using shielded Category 5 (or above) cabling for all wired Ethernet connections.

Q: Where can I find industrial-grade, shielded Ethernet cable from Ubiquiti?

A: For more information and to purchase industrial-grade, shielded Ethernet cable from Ubiquiti, visit ui.com/toughcable.

Package Contents

Installation Requirements

• Flathead screwdriver
• Phillips screwdriver
• Pliers
• Shielded Category 5 (or above) cabling should be used for all wired Ethernetconnections.
  We recommend that you protect your networks from harmful outdoor environmentsand destructive ESD events with industrial-grade, shielded Ethernet cable fromUbiquiti. For more information, visit ui.com/toughcable

PoE Adapter

1. PoE OUT
   Connect the provided RJ45 cable to this port and port 1 on the USW-Flex to providepower to the USW-Flex.

2. Terminal Block
   Used to connect AC power source to the PoE Adapter. L should connect to positive,ground connects to the middle, and N should be the neutral connection.

3. LED
   Lights white when properly connected to a power source.

Hardware Installation

Connecting the Switch

Wall Mounting

Optional:
Secure the enclosure using the included Torx or Phillips Security Screw.

Pole Mounting

Optional:
Secure the enclosure using the included Torx or Phillips Security Screw.

USW-Flex-Utility

Dimensions (with Mount)| 249 x 218 x 60 mm

(9.80 x 8.58 x 2.36″)

Weight (with Mount)| 740 g (26.10 oz)
USW-Flex-Utility 60W PoE Adapter

Dimensions| 118.5 x 63 x 34.7 mm (4.66 x 2.48 x 1.36″)
Weight| 206 g (7.27 oz)
Output Voltage| 54V, 1.11A
Rated Voltage| 100-240VAC
Input Current| 1.5A (Max.)
Efficiency| > 86%
Output Ripple| 200mVpp
Line Regulation| < 1%
Load Regulation| < 3%
4-Pair Powering| Pins 1, 2, 4, 5+ and Pins 3, 6, 7, 8-
Operating Temperature| -20 to 60˚ C (-4 to 140˚ F)
Storage Temperature| -30 to 70˚ C (-22 to 158˚ F)
Operating Humidity| 5 to 90%, Noncondensing
Surge Immunity| 4kV Difference and Common Mode

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.

• WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
• WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• WARNING: Do not use this product in location that can be submerged by water.
• WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

USW-Flex-Utility Quick Start Guide

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Canada
CAN ICES-3(B)/NMB-3(B)

Australia and New Zealand

CE Marking

WEEE Compliance Statement

Declaration of Conformity

Online Resources

© 2023 Ubiquiti Inc. All rights reserved.

https://dl.ui.com/qsg/USW-Flex-Utility/USW-Flex-Utility_EN.html

References

• Ubiquiti - Warranty
• UniFi - Rethinking IT - Ubiquiti
• community.ubnt.com/
• WEEE Compliance Statement
• USW-Flex-Utility Quick Start Guide
• UniFi - Introduction - Ubiquiti
• Software Downloads - Ubiquiti
• Ubiquiti - Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>