HORA GAR157 15W Wireless Charger User Manual
- June 1, 2024
- HORA
Table of Contents
15W Wireless Charger
Instruction Manual
About the product
Thank you for purchasing our wireless charging cell phone stand, which adopts inductive fast charging mode, With its compact and luxurious design, it can be compatible with any mobile phone that incorporates wireless charging. Save more charging time with its efficient way to charge your device.
Product Diagram
Accessories
1 Wireless charaina stand
1 Type C cable
1*User Manual
Compatible Devices
- Devices with built-in wireless fast /regular charging receiver.
- Devices with an external wireless charging receiver.
- Devices with the wireless charging receiver in a protective case.
Instructions for use
- Connect the wireless charger to the AC power source via the power adapter, the wireless charger will turn on, the indicator light will flash green and blue alternately within 3 seconds, and then enter standby mode after the indicator light turns off,
- Place your device vertically or horizontally in the center of the wireless charging stand until the device starts charging.
- When charging is complete, the LED indicator at the bottom of the charger will light up.
- Place your phone in the center of the wireless charger to ensure stable charging, do not place magnetic and metal accessories or cards on it.
Product Specification
Product: 15W Wireless Charger
Charging voltage: 5V/ 9V
Efficiency: 70%-80%
Output: 15W Max
Power:5W/7.SW/10W/15W
Product Size:69.5×85.5×111.3mm
Precautions
- Keep the charger away from water or other liquids,
- If you need to tilt the charger, please make sure the charger is turned off,
- Recommended ambient temperature is 1-45 degrees Celsius.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance between
20cm the radiator your body.
Warranty Policy
During the warranty period, if the malfunction is caused by a manufacturing
error, the user is requested to contact the dealer with this warranty card and
the purchase receipt in order to have the product replaced or repaired.
The warranty is voided under the following conditions:
- There is no warranty card or the product’s repair label has been damaged.
- Damage caused by self disassembly.
- Malfunctions and mechanical damage caused by the user or water ingress.
- Faults or damages caused by accidents.
Product Name:……..
Customer Name:……..
Purchase Address:………..
Date of Purchase:……………
Remarks:…………
WARRANTY INFORMATION
Jinxuan Electronics (Shenzhen) Co., Ltd.
A901, Building A, Galaxy WORLD, Bantian Avenue, Longgang District, Shenzhen,
China 1Hora is committed to providing quality products. Our reliability does
not end with the sales. 1Hora warrants this product against defects in
material or workmanship. For
12 months from the original date of purchase.
TERMS
The warranty covers only the original parts of the equipment (original equipment configuration) and the replacement and labor generated in the preparation process.
- The warranty card is valid only if it is properly filled out and presented with a proof of purchase consisting of an original invoice or sales note indicating the date of purchase, the dealer’s name, model number and serial number.
- The company undertakes to repair or replace the products and their defective parts at no additional charge to the buyer.
THIS WARRANTY IS NOT VALID IN THE FOLLOWING CASES:
A) When the product has been damaged by accident, disaster, neglect,
transportation, misuse, abuse by failure to observe the warnings indicated in
the user manual, and by modification or connection of an incompatible device
to the device, or does not meet technical specifications.
B) When the product has not been operated in accordance with the accompanying
instructions for use.
C) When the product has been altered or repaired by persons not authorized by
Jinxuan Electronics (Shenzhen) Co., Ltd.
Product: Brand: …………1Hora
Date of purchase: ………………..
Reseller Name:……….
Reseller address: …………Phone …………
Buyer address:……………Phone:……………..
Jinxuan Electronics (Shenzhen) Co., Ltd. in no event shall be liable for any
damages, including lost profits or other consequential damages, resulting from
the misuse or inability to use such equipment.
SOPORTE PARA CELULAR CON CARGA INALAMBRICA 15W
Support with
Product Specification
Model | GAR157 |
---|---|
REF | GAR157 |
Product Size | 69.585.5111.3mm |
Input | 5V=2A / 9V=2A |
Output | 5W/7.5W/10W/15W |
Wireless Charging Distance | 2mm-6mm |
Color | Black |
Material | ABS |
18W or Above PD/QC Charger is Recommended.
GAR157 NEGRO BLACK
HECHO EN CHINA
www.1Hora.com