HORA AUT206 Earbuds Wireless Bluetooth 5.3 with Charging Case User Guide
- June 14, 2024
- HORA
Table of Contents
AUT206
WIRELESS EARBUDS
Frequently Asked Questions (FAQs)
Connectivity Issues:
If the earphones are not connecting or pairing with your smartphone or computer: (1) Try to reset the earphones by tuming them off and on again. (2) Make sure Bluetooth is enabled on your device and that the earphones are within the Bluetooth range. (3) I the problem persists, ry unpairing and re- pairing the earphones.
Charging Problems:
If the earphones are not charging properl (1)Checkf the charging case and charging ports are clean and free from debris (2) Ensure that the earphones are properly aligned with the. charging pins in the case. (3) I the issue persists, try using a different charging cable or charger to determine if the problem lies with the accessories.
Battery Life Issues:
If the earphones have a short battery | (1) Make sure the earbuds and charging case are fully charged before use. (2)Try to reduce the volume or using a lower power mode if avalable. (3) Keep your earphones close to your connected device to avoid signal interference.
No Sound Issues:
If your headphones have no sound, you can try the following troubleshooting steps: (1) Check the headphone connection: Make sure the headphone plug s flly inserted into the audio device's jack. Sometimes, an incomplete connection can result in o sound. (2) Check the volume settings: Ensure that the volume settings are properly adjusted. If the Volume is set 100 low or muted, there wil be no sound. (3) Test with another device: ‘Connect the headphones to a diflerent audio device to see If the issue persists. This will help determine ifthe problem is with the headphones or the original audio device. (4) Try a different audio source: Test the headphones with a different audio source, such as a diflerent song or video, o rule out any issues with the specifi media fie. (5) Clean the headphone jack Ifthere is debris or dirt n the headphone jack, t may interfere with the audio connection. Use a clean cloth or compressed air o remove any obstructions media file
Poor Sound Quality:
If you experience poor sound quality: (1) Check if the earphone's drivers are clean and free from debris. (2) Ensure that the earphones are properly inserted into your ears for a secure fit. (3) Try adjusting the audio settings on your device or testing the earphones with a different device to determine if the problem lies with the earphones or the device.
Fit and Comfort Issues:
If your TWS earphones are uncomfortable or do not fit properly: (1) Try experimenting with different ear tip sizes o styles. (2) Make sure to properly insert the earphones into your ears, as a secure fit can greatly enhance comfort and sound qualiy.
Remember, if these solutions do not resolve the issues with your earphones, it is recomm- ended to contact the manufacturer’s customer support for further assistance.