HORA AUT205 Bluetooth Wireless Headset User Manual

AUT205
Manual

PLEASE READ ALL INSTRUCTIONS CARERULY AND REAIN FOR FUTUREUSE

Packing list

Reminder

1. Please do not disassem ble and replace any component is of earbuds.
2. Don(t put the earbuds In to the water or any others liquid ,the earbuds a re not waterproof.
3. If any liquid enters the product by accident tally, please disconnect mimed lately.
4. Please make sure that the re is no water on your hands when disassemble the product to avoid electric shoe k.
5. Do not put the p rodu ct near by the heat source or expose it to the fire source directly.
6. Do not put the p rodu ct in the envi ronment with strong electromagn etic force, otherwise it will cause product malfun ction.

Earbuds specification

Model : AUT205
Transmission di stance: a1OM
Battery capacity: 40mAh
Playing time: about 7 hours (earbuds)
Charging time: about 1.5 hours (earbuds)
Rated Input 5V —40mA
FCC ID 2A9HV-AUT205

Charging case specification

Battery capacity: 230mAh
Charging time: about 1.5hours
Rated input 5V —260mA
(All technical Information is subject ct to actual per romance)

Charging the box

Charging status: flashing red light
Charge comp!  etc: steady red light
Low battery. green light flashes for 4 times, please charge

LED light guide

Earbuds| Put the earbuds in the charging box and the earbuds
charged automatically| Pairing status: Flashing red and white
Connected Status: Lights out Music/voice statusligh is out
Charging status: Steady red
Charging corn pelted: red light goes off after Low battery: Flashing red
---|---|---
Charging case| To charge the case use a type cable and 5V adapter| Charging: Red light flashing
Charging completed: Red light steady Charging box to charge the earbuds green right goes off after 4 seconds

Product operation instructions

• Turn on
  Method 1 : Take can earbuds from the due rging box and Wm on au tom ati cally
  Method 2: Long press the touch key for 3 seconds [Mum on 6810U0S

• Turn on
  Method 1 : Pu Mises/tuft backlit toothache rgin gcaseandlumit off automatics Ily
  Method 2: Press and hold 5 seconds on the touch key to turn off
  Call mode
  Left/Right eartuds ope ration

• Pairing
  Take out earbuds I rom chargi ng box, the earbud maill au tom ati cal ly enter the BT pairing mode, sele CI the name ot earbuds on your d mimes BT list to coned

• The operation of the touch key Music play mode
• Left/Right earbuds ope ration

Call mode

• Left/Right earbuds ope ration
  • Pause/Play: Tap on left earbuds
  • Next track: Click the right earphone(R) to touch the fun ction key
  • Voice assistant (Sid) : Press and hold on 2 seconds

Warranty statement

For these occasions , we do not provide after-sale warranty services.

1. The validity period 3 months of “Repair, replacement and return” exceeded;
2. Alteration of the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or imp roper t ranspor  tation, use, main tenance or storage! m paired or dama ged;
4. Failu re or dama ge caused by force majeu re (such as earthqua ke, war, fire, etc.) or accident bad;
5. The zipper and buckle a re damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp obje cts;
8. Produ cts with signs of burning or water immersion;
9. Damage caused by unauthori zed disassembly;
10. Aging, discolo ration, ab rasion, ru ptu re and other losses occurred during normal use of the p rodu ct.
11. If the original identification label of the p rodu ct is changed or dama ged, this guarantee will be come in valid. The compl eteness and appearance of the product and a mom panying materials are not within the s cope of the guarantee. You should Check on the sp of and raise objections to any discrepancies.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement.
  The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>