MI02 Battery Free Wireless Doorbell User Manual
- June 3, 2024
- Doorbell
Table of Contents
MI02 Battery Free Wireless Doorbell
Product Description
Product Features
Battery-free wireless doorbell that drives wireless signals by pressing to
generate electricity, no battery, no wiring, simple installation, green and
environmental protection.The appearance are simple, generous high-grade
designed which looks very beautiful.ML02FS doorbell can be worked with
wireless receivers.smart switches and other wireless receiving equipment to
remote control electric appliance .which can easily realize single control,
dual control, multiple control and interacting control.It is not only an
doorbell, but can also used use as light control to switch on or off.
Product diagram:
- Volume button and back
- Pairable button and music selection button
- Indicator
- Transmitter button
Technical parameter
MI02 Technical parameter:
User Instruction
- Pairing : The indicator led of ML02JS receiver is on means in the status of pairing mode.press the indicator led once until have a flicker means successfully paired 1 switch, the receiver can pair 5 switches max. You can also pair it yourself as below picture. When the receiver has been equipped with 5 switches, if you want to pairing other new Switch, then the first paired switch will automatically replaced.
- Long press the pairing button for 3 seconds within 1 minute after the receiver is powered-on.
- lt enters the pairing mode after the indicator light is on the receiver.
- Press the LED until the indicator light flashes on the receiver, then press the transmitter and pairing finished successfully.
- Clear the pair code: Long press the receiver button within 1 minute after the receiver powered-onuntil the indicator led is on and flash 3 times, all the code is cleared.
- The music back to the first one: Long press the “Volume Adjustment· button and “back button·when the receiver status is powered on, thus can hear the first music.
- Song selection : When the receiver is powered on, short press the ftpairing and song selection” button to search for the built-in 38 songs in turn.
- Volume selection : When the receiver is powered on, short press the “volume adjustment and return keys to adjust the volume in turn. There are three options for volume: high, medium, low and silent mode.
ML02FS Install Instruction:
The ML02FS transmitter can be placed or moved at will, you can fix it anywhere
you want
-
Method 1 (double-sided stickers): Show as below picture, have the double side sticker on the back of transmitter, then paste anyway you want.
Tip: Please avoid installing on metal objects (iron gates, iron windows, etc.) to avoid influence the launch distance. Please make sure it’s availability before install the transmitter. -
Method 2 (screw mounting): optional accessoriesPut it in the desired fixed position and try to draw the positioning point normally then use professional tools to punch holes on the wall to install rubber plugs, fix the bracket plate to the wall with screws, and slide the transmitter in place.
Tip : Please avoid installing on metal objects (iron gates, iron windows, etc.) to avoid influence the launch distance. Please make sure it’s availability before install the transmitter.
Failure analysis and troubleshooting
- No sound : Confirm if the receiver is plug in, check if the receiver is in mute state. Confirm if the transmitter paired with the receiver successfully
- Short transmission distance : Metal objects such as iron doors and iron frames will influences the transmission distance. So don’t place the transmitter and receiver near metal objects. Walls and ceilings will also influences the transmission distance, and other wireless devices will also interfere
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>