LESTAR CT-6FT 72 Inch Heavy-Duty Adjustable Workbench Instruction Manual
- June 1, 2024
- LESTAR
Table of Contents
CT – 6FT
OPERATOR’S MANUAL
72″ HEAVY-DUTY ADJUSTABLE
WORKBENCH
CT-6FT 72 Inch Heavy-Duty Adjustable Workbench
| | |
---|---|---|---
USE PRECAUTION
For your safety| INSTRUCTION MANUAL
Read and understand| EYE PROTECTION
Must be worn| PROTECTIVE GLOVES
Must be worn when handling tool
CAUTION: Read and follow all Safety Rules and Operating instructions
before first use of this product.
NOTE: Ensure all components are present. If any components are missing,
do not proceed with assembly.
SAVE THIS MANUAL FOR FUTURE REFERENCE
COMPONENTS
Ensure all components are present. If any components are missing, do not proceed with assembly.
| PART | PIC | DESCRIPTION | QTY |
|---|---|---|---|
| A | Adjustable leg | 1 | |
| B | Leg with power charge strip | 1 | |
| C | Beam | 2 | |
| D | Rubber wood top | 1 | |
| E | Support rod | 1 | |
| AA | M5X15 Cross head tapping screw | 31 | |
| BB | M8X20 Inner hexagonal at head bolt | 8 |
TOOLS REQUIRED (NOT INCLUDED)：
ASSEMBLY
NOTE: Do not tight all the screws before final step.
Step 1
- Fix the leg (A)(B) with beam (C) use 8 pcs M8 x 20 (BB).
| PART | A | B | C | BB |
|---|---|---|---|---|
| DESCRIPTION | Leg | Leg with power charge strip | Beam | M8x20 Inner |
hexagonal at head bolt
QTY| 1| 1| 2| 8
Step 2
- Place the rubber table top (D) on a flat surface with the positioning label facing up.Protect the table with packaging materies.
- Align the positioning label and install the legs (A&B) & beams (C) on the rubber wood top using M5 x 15 cross head tapping screw(AA).
| PART | A | B | C | D | AA |
|---|---|---|---|---|---|
| DESCRIPTION | Leg | Leg with power charge strip | Beam |
Rubber wood top
| M5x15 cross head tapping screw
QTY| 1| 1| 2| 1| 24
Step 3
- Fix the support rod (E) on the shaft of the rubber wood top (D) using M5 x 15 cross head tapping screw(AA).
| PART | D | E | AA |
|---|---|---|---|
| DESCRIPTION | Rubber wood top | Support rod | M5 x 15 cross head tapping |
screw
QTY| 1| 1| 7
Step 4
- Stand up the workbench and adjust the feet if necessary to make the workbench stable.
- Please recycl e where facilities exist. Check wit h your local authority for recycling advice.