DECKED AD30 DRAWER LOCK NYLON PAWL ANTI-ROTATION User Manual
- June 5, 2024
- DECKED
Table of Contents
DECKED AD30 DRAWER LOCK NYLON PAWL ANTI-ROTATION
TOOLS REQUIRED
Phillips screwdriver, 7/8″ socket or wrench
Installation Step
- STEP 1: Install one anti-rotation support in each drawer, flat side down.
- STEP 2: Install one rubber o-ring onto each lock barrel:
- STEP 3: Insert key into lock core with the teeth facing up. Insert the lock core through the drawer and the anti-rotation support – note the correct position of the 90° washer.
- STEP 4: Install lock core nut and tighten it with a 7/8″ socket or wrench.
- STEP 5: Align and seat pawl onto lock core with the lock arm facing up. Install the lock screw with a Phillips screwdriver. Tighten until snug.
THESE MIGHT BE USEFUL: Watch installation videos at www.DECKED.com/video or scan here:
References
- DECKED Truck Bed Storage, Tool Boxes & Truck Accessories
- Truck Bed Storage and Organizer Videos from Decked
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>