Mircom LT-6732 Hands Free Building Telephone Entry Systems Instruction Manual
- June 15, 2024
- Mircom
Table of Contents
Mircom LT-6732 Hands Free Building Telephone Entry Systems
Product Information
Specifications :
- Model: TX3-BBR-C
- Dimensions: 330mm x 194mm x 65mm
- Weight: Not specified
- Material: Reinforced continental enclosure
- Mounting: Flush mount inside the wall
Product Usage Instructions
Installation:
Find a suitable location for the enclosure. Cut an opening in the wall with the following dimensions: 17″ (432mm) height, 10 1/2″ (267mm) width, and 3 1/8″ (79mm) depth. Refer to Figure 2 for visual representation.
- Insert the enclosure into the wall cutout. Ensure that the enclosure is installed right-side up, with the ground screw located at the bottom.
- Attach the enclosure to the supports using four appropriate fasteners. Refer to Figure 1 and Figure 2 for the mounting hole locations.
- If mounting to a wall stud, attach one side to the wall stud using appropriate fasteners and leave the other side free.
(Frequently Asked Questions)
Q: What are the dimensions of the cutout in the wall for installation?
- A: The dimensions of the cutout should be 17″ (432mm) in height, 10 1/2″ (267mm) in width, and 3 1/8″ (79mm) in depth. Please refer to Figure 2 for a visual representation.
Q: How should the enclosure be installed?
- A: The enclosure should be installed flush with the wall, right-side up, with the ground screw located at the bottom. Please refer to the installation instructions for more details.
- TX3-BBR-C Installation Instructions The reinforced continental enclosure flush mounts directly inside the wall to the wall stud as shown in figure
- 2. Mount the back box flush with the wall and right-side up (the ground screw location is at the bottom).
Installation Instructions
The reinforced continental enclosure flush mounts directly inside the wall to the wall stud as shown in figure 2. Mount the back box flush with the wall and right-side up (the ground screw location is at the bottom).
Install the reinforced continental enclosure
- Find a suitable location for the enclosure.
- Cut an opening in the wall. The dimensions of the cutout are shown in figure 2.
- Insert the enclosure into the wall cutout.
- Note: Install the enclosure right-side up (the ground screw is on the bottom).
- Attach the enclosure to the supports using four appropriate fasteners. The mounting holes are shown in figure 1 and figure 2.
- Note: If you are mounting the enclosure to a wall stud, attach one side to the wall stud with appropriate fasteners, and leave the other side free.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>