HIOS CLC Series DC Screwdrivers Controller Instruction Manual
- September 4, 2024
- HIOS
Table of Contents
- HIOS CLC Series DC Screwdrivers Controller Instruction Manual
- Important Safety Instructions
- Handling
- INSTRUCTIONS.
- Accessories
- Compatible Screwdrivers (Including OPC/SS Type
- CLC-45
- CLC-60
- Attach the Mounting Bracket
- Specifications
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HIOS CLC Series DC Screwdrivers Controller Instruction Manual
Important Safety Instructions
Before using this machine, read this section and follow the instructions to properly use this machine.
Installation
- The unit should be used in a temperature and humidity-controlled room. Keep the unit away from a place with poor ventilation, in dust or metal pieces.
- Do not place any objects on the
- The place to install the unit should be vibration-free and the unit should be securely fixed. If theunit is installed on the wall or on a high place, make sure to use the attached Mounting Bracket to fix it securely.
- Donotinstall the unit close to high voltage
Handling
- Installaleakage breaker and safety breaker on the input power source and connect the ground to use the
- Connect to a power source of the specified
- Do not use with other drivers or devices except the models listed in this operation
- If the protection circuit works due to overheat, stop operation immediately, pull the power plugfrom the outlet and send it back to your HIOS distributor for repair.
- The unit may automatically stop in use when the protection circuit works due to overcurrent, Turn off the power switch once and turn it on in 5 seconds for restart.f the unit stops while in screw fastening, make sure to check the torque of the fastened screw.
- Do not disassemble or modify the
- Donotdrop the power Supply or subject it to violent
- Do not drag the unit by its driver cord or AC Keep the cords away from foreign objects, oil orsomething sharp.
- Makesureto grasp the plug section to disconnect the AC cord from the
- Turn the unit off and disconnect the AC cord from the outlet when the unit is not in
- IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE
- DANGER-TOREDUCE THE RISK OF FIRE OR ELECTRIC CAREFULLY FOLLOW THESE
INSTRUCTIONS.
Accessories
- Power **Indicator: ** Lights up when the power switch is turned ON.
- Connector for the Screwdriver: Connect the screwdriver cord.
- DC Output Switch: 2 (HI: DC30V) / 1 (LOW: DC20V)
- Power Switch: Turns the power ON or
- Connector for AC Cord: Connect the power
Compatible Screwdrivers (Including OPC/SS Type
CLC-45
Series Model
| CL | CL-2000/CL-3000/CL-4000/CL-6000/CL-6500 |
|---|---|
| SS | SS-2000/SS-3000/SS-4000/SS-6500 |
| α | α-4500/α-5000 |
CLC-60
Series Model
| CL | CL-2000/CL-3000/CL-4000/CL-6000/CL-6500/CL-7000 |
|---|
SS
α
| SS-2000/SS-3000/SS-4000/SS-6500/SS-7000
α-4500/α-5000/α-6500
CLC-80
Series Model
| CL | CL-9000NL |
|---|
Attach the Mounting Bracket
Specifications
HIOS Inc. __
1-35-1 Oshiage, Sumida-ku Tokyo, Japan
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>