OQIMAX TS-9210 Mirror Projection Clock Instruction Manual
- June 1, 2024
- OQIMAX
Table of Contents
TS-9210 Mirror Projection Clock
Specifications:
- Product Name: TS-9210 Mirror Projection Clock
- Dimensions: 18.5cm x 7.7cm x 1.2cm
- Power Supply: TYPE-C power cord or CR2032 button battery
- Default Display: LED white light, 24-hour format
Product Usage Instructions:
1. Power Supply Method:
There are two power supply options for the clock:
-
TYPE-C power cord: The clock remains on when connected to the
power cord. -
CR2032 button battery: Used for time memory only. Note:
Batteries are not included.
2. Power On and Reset:
After powering on, the default display will show LED white light
with the time set to 0:00 in a 24-hour format. The default alarm
mode is Sound Alarm.
3. Time Setting:
-
In time display mode, long press the mode button to enter the
setting mode. -
Setting sequence: 12/24-hour format, hour setting, minute
setting, exit. -
Adjust values using the +/- buttons. Long press for quick
adjustments. -
Automatic save if no operation within 10 seconds.
4. Alarm Setting:
-
Single press AL1.2 to toggle alarm on/off.
-
Long press AL1.2 for 2 seconds to enter setting mode.
-
Setting sequence: Alarm 1 hour, alarm 1 minute, alarm 1 snooze,
alarm 2 hour, alarm 2 minute, alarm 2 snooze. -
Adjust values using the +/- buttons with options for quick
adjustments. -
Default snooze time is 5 minutes.
5. Alarm and Snooze:
In time display mode, single press to select alarm mode. Options
include sound alarm, vibration alarm, sound + vibration alarm, or
off.
Frequently Asked Questions (FAQ):
Q: What is the default snooze time for alarms?
A: The default snooze time is set to 5 minutes.
Q: How can I switch between 12-hour and 24-hour time
formats?
A: In time display mode, long press the mode button to enter the
setting mode and navigate to the 12/24-hour setting option using
the +/- buttons.
TS-9210
Mirror projection clock
1
————————- ——————————————————-
TS-9210 Mirror projection clock: 18.5cm
—————————————————————————————————AL1
7.7cm
PM
AL2
————-
1.2cm
——————————–
2
2.4cm
———
HORN 3
CR2032 BATTERY COMPARTMENT
Vibrator jack REMOVABLE SUPPORT FRAME
Function and button indication diagram
sound
Projection lamp
AL1
Alarm clock 1
Time
shock
PM
AL2
Alarm clock 2
4
MODE
AM/PM VOLUME /DOWN ADJUSTMENT
A L A R M / V I B R AT I O N / A L A R M + V I B R AT I O N
mode project
12/24
ZZ
vol
al1.2
PHOTOSENSITIVE PORT
PROJECT/UP
PROJECTION LAMP ALARM1/ALARM2
SNOOZE/BRIGHTNESS ADJUSTMENT
USB OUTPUT PORT
TYPE-C POWER PORT
5
Thank you for purchasing and using the TS-9210 Mirror projection clock. The
following is the user’s operation guide:
1.Functions LED time display The default is the brightest, with six adjustable
brightness levels. 7 function buttons: mode, project/+, 12/24/-, Z Z , Vol,
AL1.2 Projection function, projection can be rotated 180 degrees 4-digit time
display: hour, minute 12-hour and 24-hour switchable, default 24-hour The
clock turns on at 0:00 by default Two sets of alarm clocks, AL1 on for 6:00
and AL2 on for 13:00 by default Snooze function, adjustable alarm delay from 5
to 60 minutes Automatic light-sensitive function Night mode
6
2.Power supply method
1.TYPE-C power cord power supply (the product is always on when the power cord
is powered). 2. CR2032 button battery (The battery is not powered and is only
used to remember the time.). Note: The product is shipped without batteries.
Rear view 7
Type-c (1.5m USB power cord) Left view
3.Power on and reset
Default display after power on: LED white light Time: 0:00 Default time system: 24-hours format Default alarm mode: Sound Alarm
The initial interface display of power-on reset 8
4.Time setting 1. In the time display mode,long press themodeenter the setting
mode,the setting items are
displayed and flashing,and the setting sequence is: 12/24 hour settinghour
settingminute settingexit. (As shown in Figure 1) 2. During setting, short
press+to increase the value by 1; long press+to quickly increase (8 steps/s);
short press-to decrease the value by 1;long press-to quickly decrease (8
steps/s). 3. If there is no operation within 10 seconds during the setting
process, the current setting will be saved automatically and the time setting
mode will be exited.
Figure 1
12H/24H setting
Hour setting 9
Minute setting
5.Alarm setting
1. In the time display mode, single press al1.2 to turn on or turn off the
alarm, when the alarm is on, the corresponding alarm symbol is displayed.(As
shown in Figure 2)
2. In the time display mode, press and hold al1.2 for 2 seconds to enter the
setting mode, after entering, the setting items will be displayed and
flashing, and the setting sequence is: Alarm 1 hour settingalarm 1 minute
settingalarm 1 snooze settingalarm 2 hour setting alarm 2 minute settingalarm
2 snooze setting.
Picture 2
AL1
AL1
Hour setting Minute setting
Snooze time
3. During setting, short pressto increase the value by 1; long press to quickly increase (8 steps/s); short pressto decrease the value by 1;long pressto quickly decrease (8 steps/s).
4. Default snooze time is 5 minutes.
6.Alarm and snooze 10
1. In the time display mode, single
press to select the ringing alarm mode, the sequence
is alarm sound vibrationalarm sound + vibrationoff (the corresponding icon should be lit
when the corresponding mode is selected), If you do not order a vibrator, when you open the
alarm, you need to set the alarm mode to sound alarm mode and the screen must show the
icon” “. If the vibrator alarm mode is turned on separately, no sound when alarming.
2. The alarm will ring for 2 minutes.
3. When the alarm goes off, the alarm symbol AL1/ AL2 flashes.
4. Snooze function: When AL1 or AL2 goes off, press the Z Z key to enter snooze mode,
default 5 minutes.
5. Press any key other than theZ Z key to stop the alarm.
7.Brightness selection and automatic light-sensing 1. Power on the LED display
default brightest gear. 2. Single pressZ Z to switch the order of brightness:
100%80%60%40%20%0%
cycle. (As shown in Figure 3)
11
Figure 3
AL1 AL2
100%
AL1 AL2
80%
AL1 AL2
60%
AL1 AL2
40%
AL1 AL2
20%
0%
3. In the time display mode, long pressZ Z for 2 seconds to turn on or off
the automatic dimming function, ON for 2 seconds when open, OFF for 2 seconds
when closed (As shown in Figure 4).
4. Automatic light sensing: the product automatically senses according to the
strength of the ambient light and darkness, the brighter the ambient light,
the brighter the product backlight, the darker the ambient light, the darker
the product backlight.
Figure 4
Auto-sensing function is on Auto-sensing function is off
mode project 12/24
ZZ
Photosensitive port
12
vol
al1.2
8.Night mode
1. Night mode that night LED automatically into the low brightness display.
2. In the time display mode, single pressmodeto display the night mode ON
(display ON) or
OFF (display OFF) state, the default is OFF state, the default night mode time
is 18:00~6:00 automatically into the low light display, by short press/to
select ON or OFF. 3. Night mode ON display state, long pressmodeto enter the
inter val time setting, the setting sequence is: start hourstart minute end
hour end minute, start hour and minute setting, the upper point of the COOL
two points is lit, end hour and minute setting, the lower point of the COOL
two points is lit.(As shown in Figure 5)
Figure 5
START HOUR
START MINUTE 13
END HOUR
END MINUTE
9.Projection function
1. In the time display mode, single pressproject to start the projection
function, the projection brightness is high bright, single pressprojectagain
the projection brightness will become low bright, pressprojectagain to close
the projection function.(As shown in Figure 6)
2. In the projection function on state, long pressproject, the projection
screen will rotate 180 degrees. The projection column is adjustable: front 90
degrees, rear 90 degrees.
Figure 6
Projection column
mode project 12/24
ZZ
vol
al1.2
high brightness low brightness
14
10.Charging function There is a USB output port on the side of the product,
which can be used to charge cell phones
or other electronic devices through the USB output with an output voltage of
5V in the state of using Type-c power cable connection for power supply.(as
shown in Figure 7)
Figure 7
USB output port
11. Volume adjustment function In the time display mode, single press the VOL
key to select the sound (L01~L15, 15 levels of
volume can be adjusted in total)
RoHS
MADE IN CHINA
15
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>