Tuya I5-327 doorbell User Manual

Tuya I5-327 doorbell

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Minimum Distance: 20cm between the radiator and body

Product Usage Instructions

Installation:

1. Place the device on a stable surface.
2. Ensure there is a minimum distance of 20cm between the radiator of the device and your body.
3. Connect the necessary cables to power on the device.

Operation:

1. Turn on the device using the power button.
2. Follow the user manual for specific instructions on device usage.
3. Ensure the device is not causing harmful interference to other equipment.
4. If interference is detected, adjust the device position or settings.

Maintenance:

1. Regularly clean the device exterior with a soft, dry cloth.
2. Avoid exposing the device to extreme temperatures or moisture.
3. Keep the device away from direct sunlight to prevent damage.

Frequently Asked Questions

• Q: Can I modify the device for additional features?
  • A: Any changes or modifications not approved by the manufacturer may void the warranty and authority to operate the equipment. It is recommended to use the device as intended.
• Q: What should I do if I experience interference with other devices?
  • A: Ensure that the device is placed at least 20cm away from your body and adjust its position relative to other electronic equipment. If interference persists, contact customer support for further assistance.

Please read it carefully before use and keep it for future reference

Appearance introduction

Doorbell:

1. Mic

2. Lens

3. Light sensitive

4. Doorbell key

5. Indicator light

6. Reset

7. Speaker

8. Charging port
   Ding dong:

9. Indicator light

10. Speaker

11. Pairing key

12. Music toggle

13. Volume size

14. USB plug port

Download mode of APP

For Android phones, it can be downloaded from its own app market or App Treasure Search (Smart Life). For IOS phones, search for “Smart Life”‘ in the APP Store to download.

Note: The function of this doorbell is only supported on APP 4.3.0 and above, for a better user experience, please update or download the latest version.

APP registration

1. For the first download and use, please click “Register”; If you have an account, click “Login”.
2. Click “Register”, read “Privacy Policy”, and click ‘Agree”. Enter a valid mobile phone number or email address and click Continue. Then enter the verification code to log in to the APP.(“Try Now” login can not add doorbell devices normally, please register and log in.)

Adding a device:

1. Turn on the bluetooth and location permission functions of the mobile phone.
2. Press the doorbell button to start the device, and the work indicator blinks. The device enters the network mode.
3. Open the APP, enter the “Home page”, click+ on the upper right corner of the page, the APP will automatically scan and discover the device, click “Add”.

Note:

a. If the device is not automatically searched, please click “Turn on Bluetooth” in the picture below and set “Allow device permissions near this application”.

b. Access permission management, enable WLAN, Bluetooth, and nearby devices, and select Always Allow.

• After adding a doorbell, enter your 2.4ghz wireless network account and password and click “Next”. When connecting, keep your router, mobile phone and doorbell as close as possible. After adding a doorbell, click “Finish”.
  (Note: If the connection is not successful, please reset the device and reconnect)

• Fully charge the device and install it within the stable and effective range of WiFi signal. The smart doorbell host is successfully added.

Doorbell and ding Dong matching

1. Power on the ding Dong machine (left);
2. Long press the pairing button of the ding Dong machine for 3 seconds (as shown in the picture), and the indicator blinks.
3. Press the doorbell button (right), ding Dong machine rings, that is, the match is successful.

Mobile message push

Enter mobile phone – Settings – notification and status bar – Application notification management, open APP notification permission, enable notification, suspension, lock screen, sound reminder and other notification functions.
(Note: Due to different mobile phone models, the operation interface and options are different, please choose independently)

Function introduction

• Message push: When visitors ring the doorbell, the mobile phone will receive the APP push message, click the push popup to enter the video call.
  2. Video call: Hold down the microphone key to talk to each other, open the speaker to listen.
  3. Doorbell sharing: Enter the real-time interface of APP, click Settings – Share device – Add Share – enter the registered account
  4. Low battery reminder: When the battery is low, the APP will push low battery reminder, please charge in time.

Matters needing attention

• The device is a low-power doorbell. When no one rings the doorbell, the device goes into hibernation and goes offline, which is normal.
• The push Settings vary according to mobile phone models. Set the Settings as required.
• Only 2.4g WiFi is supported, but 5G or Wifi with special symbols is not supported.
• Do not install the device on a metal wall because it may interfere with WIFI signals.
• The device supports TF card video storage. Do not insert or remove the memory card when it is powered on to avoid loss.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>