CHUANGSHIJI Apple Watch Case Installation Guide
- April 3, 2024
- CHUANGSHIJI
Table of Contents
CHUANGSHIJI Apple Watch Case
Watch Case Installation tutorial
-
The front and back of the case, the rotation button is on the right side of the front.
-
The watch strap is aligned with the crown hole of the protective case.
-
The watch enters from the front of the case, and the crown is installed first.
-
press the rest part into the case.
-
Notice: After installation, if the case hole is not very suitable, please gently pull the case to better match the watch.
-
Installation completed effect
Watch Band length adjustment tutorial
-
Put the watch band into the tool watch band, align the needle hole, press the needle core clockwise in the direction of the arrow;
-
Pull the pin out of the watchband and separate the band’s link to adjust the length.
-
Insert the pin core into the connecting hole from the opposite direction of the arrow;
-
Use the end of the tool or any sturdy object to press the pin to level the surface.