HYBRID POWER 1175002-Buddha Outdoor Garden LED Fountain Instruction Manual
- June 1, 2024
- HYBRID POWER
Table of Contents
HYBRID POWER 1175002-Buddha Outdoor Garden LED Fountain
CONTENTS
ASSEMBLY
- Place the pump into the base and connect to the tube located inside the base.
- Fit pump cable through the rear access hole.
- Fit pump cable to solar panel cable.
- fill the main base with water. Water must be regularly topped up so that the pump does not run dry.
- Slot the metal grate and Buddha figures back into position.
- Please note: The water level should be regularly checked and topped up so that the pump does not run dry, and keeps the fountain clear of leaves and debris to prevent the pump from getting clogged up.
Ensure connectors are watertight.
PERFORMANCE
This product is designed primarily to operate in the summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received. When the switch is set to “On” position; If the sun is strong, the solar panels supply power to the water pump and charge the battery. If the sunlight is weak, the solar panel and the battery together supply power to the water pump. If there is no sunlight at all, then the battery supplies power to the pump until the battery is depleted. When the switch is set to the “off” position, and the solar panel is in the sun, the water pump stops working and the solar panel will charge the battery. When fully charged the battery will provide an additional 4-6 hours water pump usage.
PANEL MOUNTING
- Solar panels can be mounted using the ground spike or wall/deck bracket.
- Slide the pivot assembly onto the back of the panel and then use with vour selected mounting option.
FROST
Frost causes damage, so we recommend that you store the whole fountain inside
during cold weather.
POSITION
Position the solar panel to receive the maximum amount of sunlight.
MAINTENANCE
Regularly clean the solar panels using water or glass cleaner, in conjunction
with a non-abrasive sponge.
PUMP CLEANING
We recommend regular maintenance and water changes to ensure optimum
performance.
PROBLEM-SOLVING
- Check the solar panel is positioned correctly.
- Check that the pump filter is clean.
- Check that there is sufficient water in the bowl.
- Check that there is no debris in the bowl blocking the pump.
- If problems persist please contact customer services.
WARRANTY
1 YEAR WARRANTY
Email: uksupport@sgpuk.com
Email: euservice@sgpuk.com
Tel: +44(0)1443 843306