NAN WBJ-10A Ice Maker Instruction Manual
- June 1, 2024
- NAN
Table of Contents
NAN WBJ-10A Ice Maker
Product Information
Specifications
- Model No(S): WBJ-10A
- Manufacturer Contact: (909)637-7665 | (909)637-7593 EST 9:00AM–17:00PM
Important Safety Information
Before using the ice maker, ensure that the voltage power matches the appliance nameplate. The unit must be grounded and avoid using extension cords unless necessary.
Children or individuals who are unable to operate the ice maker should not handle it. Do not use unsafe water quality and ensure proper installation indoors only.
Product Introduction
The ice maker features a control panel with various indicators, an ice
storage basket, a drain plug, and an ice scoop for convenient use.
Before Using You Should Know
Prior to connecting the power cord, let the machine sit upright for 24
hours to allow the refrigerant to settle. Unpack all packaging materials
before use.
How to Use Your Ice Maker
- Ensure the ice maker is placed on a flat, stable surface with proper ventilation.
- Plug in the unit and allow it to settle for 24 hours before first use.
- Add water to the reservoir up to the indicated level.
- Select the desired ice size on the control panel (small or large).
- Press the ON/OFF button to start the ice-making process.
- Wait for the ice to form and collect it using the ice scoop when the ice full indicator lights up.
- Clean the ice maker regularly following the cleaning instructions provided.
Troubleshooting
If you encounter any issues with the ice maker, refer to the troubleshooting
section in the manual or contact customer support for assistance.
FAQ
-
Q: Can I use this ice maker outdoors?
A: No, the unit is designed for indoor household use only. -
Q: How often should I clean the ice maker?
A: It is recommended to clean the ice maker regularly, following the provided cleaning instructions, to ensure optimal performance.
Thank you for choosing our ice maker
Please make sure your items have arrived in good condition and confirmation of
goods receipt. If you have any questions or problems, please feel free to
contact us for assistance. Please take a few minutes to read this manual
carefully. Proper maintenance and operation of this machine can provide better
service.
IMPORTANT SAFETY INFORMATION
- Before using check that the voltage power corresponds to the one shown on the appliance nameplate.
- This appliance must be grounded.
- Avoid the use of an extension cord because it may over heat and cause a risk of fire. However, if it is necessary to use an ex-tension cord:
- Use only extension cord with grounding plug.
- The marked rating of an extension cord must be equal to or greater than the rating of this appliance.
- Do not operate if any component, including the cord or plug, is damaged.
- Unplug the unit before cleaning by hand and when not in use.
- Children or mentally/physically unable personnel are not allowed to operate the ice maker.
- Do not place the power cord in such a way it could be pulled on by children or cause a tripping hazard.
- Closely watch children who are near the unit when making ice
- Do not use water that is micro-biologically unsafe or of unknown quality.
- Do not touch the evaporator with your hands while the ice maker is operating. Do not plug or unplug the unit with wet hands.
- The unit must be properly installed and located following the installation instructions before it is used. The unit is for indoor household use only.
- Do not store or use flammable vapors or liquids near the unit.
- Do not immerse any part of the unit in water.
- Do not attempt to disassemble, repair, modify or replace any part of the ice maker without permission.
WARNING
Risk of fire / flammable materials
- Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance
- When handling, installing and operating the unit, care should be taken to avoid damage to the refrigerant tubing.
- Keep ventilation openings in the unit enclosures or the built-in structure clear of obstruction.
- Do not place the uni near heat sources such as an oven.
- Ensure a minimum of three inches of clearance around the side and back walls of the unit for proper air circulation.
- Do not place the unit in direct sunlight.
PRODUCT INTRODUCTION
-
A— Small ice indicator
-
B— Large ice indicator
-
C— Clean indicator
-
D— ON/OFF button
-
E— Select button
F— Power indicator -
G— Add water indicator
-
H— Ice full indicator
BEFORE USING YOU SHOULD KNOW
Before connecting the power cord, please put the machine upright for 24 hours to allow the refrigerant to settle. Unpack all packaging materials: foam, bags, tape, etc.
- The machine should be placed on a stable level to support the ice machine’s weight of water or ice.
- This machine can be installed without any support and can be installed in any place that meets the conditions of use and power supply.
- Use a machine in place that is well-ventilated and has a temperature between 50 ℉ and 100℉. Do not install or operate the machine in a sealed space, such as a closed room.
- Install the machine away from the following factors, such as wind, rain, water mist or the electromagnetic environment.
- Do not place it next to high-temperature sources such as ovens and grills.
- To ensure long-term use of the machine, use filtered or purified water; or use citric acid every other week to clean the outside of the machine and the dust deposits on the bottom of the tank.
HOW TO USE YOUR ICE MAKER
When using for the first time (or not used for a long time), it is recommended to discard the ice cubes made in the first 4 cycles to ensure that the machine is thoroughly cleaned.
- Open the front cover, take out the ice basket, and pour potable water into the water tank (Do not exceed the MAX mark of the water level).
- Put back the ice basket. Make sure the water level is below the bottom of the ice basket, and then close the front cover.
- After plugging in, the appliance is in standby mode with the power indicator flashes green and small ice indicator stable in green.
- Press the ON/OFF button once, the appliance will start working in small ice cube mode by default, and the small ice indicator will be stable in green color.
- During the ice making cycle, press the Select button to switch to large ice cube mode; the large ice cube indicator will turn on. The appliance has power-off memory function. The previously running large/small ice cube mode before power-off will be automatically resumed after power-on.
- In the standby mode, press and hold the ON/OFF button for 5 seconds, the appliance will enter self-cleaning mode, and the clean indicator turns red .After 15 minutes, self-cleaning mode ends, the appliance switches to standby mode, and the power indicator flashes.
TIPS:
- When the ice box is full, the “ICE FULL” indicator on the display panel will light up (red), and the machine will stop automatically. When the ice is removed, the machine will restart working.
- If water is insufficient, the “ADD WATER” indicator lights up (red) and the ice maker will stop working. After refilling, press the ON/OFF button to restart.
- When you do not use the ice maker, please turn off the ice maker and unplug the power cord.
TROUBLESHOOTING
- If the machine breaks down, please wait for the machine to stop automatically. You can solve the problem by using the method in the table below. But don’t disassemble, inspect or repair the machine without professional guidance.
- This machine has a self-checking function. If an error occurs, the ice-full and add-water indicator will flicker alternately, and the ice maker will stop working.
Phenomenon | Cause | Solution |
---|---|---|
The machine does not respond | Not powered | Check the power supply |
Check the power cord connection Check the power cord for damage
There is no power in the power jack
The power cord is not plugged in firmly
Power cord is damaged| Call authorized technician repair
Add water indicator light on| Lack of water| Please add water and restart the
machine
Poor induction of the water shortage sensor| Power of for 2 minutes and
restart the machine
Ice full indicator light on
| Ice basket is full| Please take out the ice cubes from the ice basket
Poor induction of ice full sensor| Clean the induction probe
Ice cubes stick together| Ice-making environment temperature or water
temperature is too low| Replace the water. Temperature of water recommended at
45℉-90℉
Ice cubes smaller than usual size| Ice-making environment temperature or water
temperature is too high| Replace the water. Temperature of water recommended
at 45℉-90℉
The machine is working properly but does not make ice| Refrigeration pipe
blockage| Call authorized technician repair
| Refrigerant leak| Call authorized technician repair
TECHNICAL PARAMETER
Model | WBJ-10A |
---|---|
Applicable Climate Types | SN/N/ST |
Grade of protection against electric shock | Ⅰ |
Ice storage capacity | 500g |
Water tank volume | 1.5L |
Rated voltage/frequency | 115V/60Hz |
Rated current | 1.8A |
Refrigerant/Weight | R600a/26g |
Type of thermal insulation | EPS |
Net weight | 7KG |
Product size | 225mm320mm295mm |
Thank You:
For choosing our ice maker!
Technical Support
(909)637-7665 | (909)637-7593
NAN@UPGRADEDECORSHOP.COM
EST 9:00AM–17:00PM
Thank you for choosing this product. We strive to provide you with the best
quality products and services in the industry. Should you have any issues,
please don’t hesitate to contact us.