COMHOMA H7134-KD Massage Recliner Chair Instruction Manual

Assembly Instructions

READ THIS MANUAL

Do not use this product until you read and understand the instructions in this manual.
KEEP THIS MANUAL FOR FUTURE REFERENCE.

TIPS: Some accessories are placed under the seat.

This manual is intended for installation and use. The pattern should be subject to the product you receive.

H7134-KD
Installation Video QR

WARNING:

This unit is intended for relaxation purposes only and should not be used in an attempt to treat any medical ailment.
Please note that should you have any medical condition, be under a health professional or physicians care. Or should you have a medical device fitted (eg. Pacemaker etc.), you must consult a qualified medical practitioner before using this massage system.

• Do not massage any part of the body that is painful, swollen, inflamed or covered with skin irritation-consult your medical practitioner before use.
• The massage system should not be used during pregnancy.
• Do not allow children to play on the chair or leave them unsupervised in the same room with the chair.
• Never operate this appliance if it has a damaged cord or plug. Contact your supplying retailer.
• Do not interfere with any part of the massage system or attempt to dismantle or repair the unit in any way.

DANGER

• Disconnect the electrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an extended period of time.
• Do not use this product if it is wet, in water, around water or any liquid.
• To prevent suffocation keep plastic bags away from children.
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.

PARTS AND ACCESSORIES

Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.

The backrest you received has been vacuum-packed. Open the plastic bag and take out the backrest, make it recovery. knead it, make it more fluffy.

(A) Backrest * 1Pc

(B) Seat 1pc                          (C) Backrest Ear Part 2pcs

(D) Iron Frame R&L *4pcs

(E) Iron Frame Decorative Sleeve R&L * 2pcs

(F) Armrest Cover R&L * 2pcs

(G) Remote Control 1pc      (H) Power Cord 1pc

(I) Metal Bolt 4pcs                      (J) Cup Holder 2pcs

(K) Plastic Pipe 14pcs                  (L) M6 Wrench 1pc

(M) Screw M6125 14pcs            (N) Screw M620 8pcs

Please check and ensure all the things are in the package. You can contact us if something is not included. We will reply within 24 hours and try our best to solve it.

ASSEMBLY INSTRUCTIONS

CAUTION: At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).

(R)

1. Carefully unpack and place parts on a clean flat surface.

2. Insert the M6x125 screw into the plastic pipe (K) , thread the screw out of the plastic pipe (K) and align it with the holes of the two sides of the iron frame R (D) , and install the plastic pipe (K) on the iron frame R (D).
Please repeat this operation for other 6 plastic pipes (K).

*NOTE: DO NOT tighten the screws completely until all the screws are fixed in the correct position.

(L)

3. Refer to step 2 to install the iron frame L (D).

*NOTE: DO NOT tighten the screws completely until all the screws are fixed in the correct position.

(L)

4. Cover the iron frame decorative sleeve L (E) on the iron frame L.

(L)

5. Align and stick the two side velcro of the Iron frame decorative sleeve L (E).

(R)

6. Refer to step 4 and step 5 to install the iron frame Decorative Sleeve R (E).

(L)

7. Cover the (F) Armrest Cover L on the iron frame L.

*NOTE: After the (F) is installed in place, zip up the (F) Armrest Cover L as shown.

(R)

8. Cover the (F) Armrest Cover R on the iron frame R.

*NOTE: After the (F) is installed in place, zip up the (F) Armrest Cover R as shown.

(L)

9. Install the cup holders into the armrests on both sides.

(R)

10. Attach the metal bolts (L) to the armrest L with screws M6x20 (N).

*NOTE: Place the wide side of the metal plates upward for installation. If the position is incorrect, this parts cannot be properly snapped into the seat’s metal plates.

(L)

1. Wide side up

(R)

1. Wide side up

11. Refer to step 10 to install the metal bolts on the armrest R.

12. Insert the metal bolts of the 2 armrests to the seat as shown below. Ensuring they are correctly in place.

13. Insert backrest metal bolts to the seat as shown below. Ensure it is correctly in place.

14. Insert metal bolts of parts (C) (both) to the backrest. Ensure they are put correctly.

15. Remove the bottom of the back fabric from the Velcro on the seat base. Connect the cables.

16. Cover the back fabric. Complete.

The method of connecting the power cords.

1. Backrest
2. Seat base
3. Remote control
4. Power cord

Connect (1)(2) with wires of same color from the seat base.
Connect (3) with Power (H) and (4) with Remote control (G)

RECLINE & FOOTREST OPERATING

A. How to recline

1. Pull the handle to lift the footrest separetely.

2. Put some pressure onto the backrest to recline back.

3. Have a relax.

B. How to get footrest pushed down?

1. The backrest will return to the upright position by moving forward.

Accompany the footrest to the initial position by putting pressure with your legs.

3. The recliner returns to the upright position.

C. Massage operation

INTENSITY: Change intensity (HIGH or LOW) during all modes.

1. POWER : Turn on/off remote control
2. HEAT : Turn on/off heat function for lumbar part only.
3. INTENSITY: Control massage function from low to high
4. MODE : Choose one massage mode you like(PULSE, PRESS, WAVE, AUTO, NORMAL)
5. You can choose 1-4 massage parts( BACK, LUMBAR, THIGHS, LEGS) to enjoy.
6. Press the TIMER key, the unit’s control time will switch between 15Min / 30Min / 60Min.

We recommend that the unit be used only for a few minutes initially, to allow your body to get used to the massage sensation. Gradually increase the length of time you use the massage function, over the first few periods of use. Should you experience any adverse reactions, stop using immediately and consult your medical practitioner.

USAGE

Leave
enough space
for reclining back

The recliner should be placed 45cm away from the wall, and the reclining function can be used normally.

The recliner with a gentle rocking motion moves back and forth horizontally and can swivel 360° (reclining angle can not be fixed).

PROPER USAGE

Steps to safely stand up from your Recliner Chair

1. Store the remote control (E) safely in the seat’s side pocket
2. Plant feet firmly on the ground
3. Evenly distribute weight on both arms of the chair
4. Slowly stand up from upright position

• Remember to store remote control safely in the seat’s side pocket when it is not in use.

*Fabric will fade or discolor in direct sunlight. Minimize exposure to direct sunlight to extend the life of your furniture.

IMPROPER USAGE

DO NOT stand up when the footrest is in the upright position.

DO NOT stand up from your recliner chair with uneven weight.

DO NOT stand up from your Recliner chair with only one arm.

As all action products contain moving parts, handle all items with care.

• Only move the recliner when it is in the ‘upright’ or ‘closed’ position. Never attempt to move the recliner when it is in any of the reclining positions. Always use the arms to move the Reliner-DO NOT use the backrest or backrest ear parts.

Dear Customer,

Thank you for choosing us.

For safe use, please read this manual before installation, and keep it for after use. Please feel free to email us if you have any concerns about our products. We’ll reply within 24 hours.

The following are the things you need to pay attention to so that we can provide you with services when you encounter problems during the installation and use of the product:

• When the product is damaged due to courier problems, please contact our customer service in time for verification.
• We will rectify the issue as soon as possible;
• We give a 365-day quality assurance;
• We provide a 7-day no-reason return service (note that the returned product will not affect the secondary sales);

We offer product explanations, installation instructions, product maintenance and maintenance methods.

If you feel satisfied with our product and service,

• Please set our store as your favorites;
• Please recommend our products to your friends;
• Please and leave us your purchase experience in our store or product page.

Feedback or reviews from you will greatly help us offer better services to players around the world.

Best regards

Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.

E-mail: info@comhoma.com
www.comhoma.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>