Schneider Electric 691, 692 Pressure Transmitter Instructions
- September 2, 2024
- Schneider Electric
Table of Contents
Schneider Electric 691, 692 Pressure Transmitter
Specifications
- Model: 691 / 692
- Product Name: Pressure Transmitter
- Conformity: CE conformity according to EN 61326-2-3
- Edition: 07/2013 – 102070
Product Usage Instructions
Before you begin using the pressure transmitter, it is essential to carefully read and understand the operating instructions provided.
Installation
- Ensure that the pressure transmitter is installed and removed only by qualified technicians.
- Follow all applicable certified national safety regulations for pressure measuring devices during installation.
- Fulfill the device-specific requirements for protection types when installing the transmitter.
Maintenance
- When fitting the connecting tubes, make sure to use the provided adhesive (e.g., Loctite 326 and activator 7649).
- Ensure that the joint O-ring is properly sealed with a sealing compound standard like Loctite 326 or equivalent.
Removal
- To remove the pressure transmitter, carefully unscrew the connections and follow the reverse steps of installation.
FAQ
- Q: What should I do if the pressure transmitter is not functioning correctly?
- A: If you encounter any issues with the pressure transmitter’s functionality, contact a qualified technician for troubleshooting and potential repairs.
- Q: Can I install the pressure transmitter myself?
- A: The pressure transmitter should only be installed by trained technicians to ensure proper setup and operation.
- Q: How often should maintenance be performed on the pressure transmitter?
- A: Regular maintenance checks should be conducted according to the manufacturer’s recommendations to ensure optimal performance.
Caution
- Before you take the pressure switch into operation, make sure to read these operating instructions thoroughly. In the event of damages due to the nonobservance of these instructions, improper operation or use of the switch for purposes for which it is not intended, the warranty becomes null and void. We shall not be held liable for resultant consequential damages.
- The switch is to be installed and removed by technicians only.
- The applicable certified national safety regulations for the operation of pressure-measuring devices shall be observed.
- In the installed condition the respective devicespecific requirements on the type of protection must be fulfilled.
Wiring
Installation Instructions
Fitting the connecting tubes
Hold steady to avoid twisting
Edition 07/2013 – 102070
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>