NAN HONG 128-6618 Electric Toys User Manual
- July 3, 2024
- NAN HONG
Table of Contents
NAN HONG 128-6618 Electric Toys
Product Specifications
- Compliance: Part 15 of the FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
- Restrictions: Antenna(s) must not be co-located with other antennas or transmitters
- RF Exposure: Evaluated to meet general RF exposure requirements
Radiation Exposure
The device has been evaluated to meet general RF exposure requirements in
portable exposure conditions without any restrictions. Users can operate the
device without concerns regarding radiation exposure.
Frequently Asked Questions (FAQ)
Q: Can I modify the device without approval?
A: No, any changes or modifications to the unit not approved by the
responsible party for compliance could void your authority to operate the
equipment.
PRODUCT MANUAL
REMOTE CONTROL
BATTERY INSTALLATION
Remote Control Battery
- Unscrew and open the battery cover.
- Insert 2 AA batteries in the correct direction.
- Close the battery cap and lock it.
If the remote control will not be used for a long time, make sure to remove the batteries.
SPECIFICATIONS
- N0.128-6618 N0.128A-36
- Dimensions:4.6×9.6xl0.2 inches
- Battery Type For Product:1.SV AA battery
- Max Control Distance:( 13 m
- Battery Type For Remote Control: 1. SV AA battery
- Operating Temperature Range :32° to 104°F (0° to 40°C)
OPERATION
-
Pairing
After the product and the remote control battery are installed, the switch at the bottom of the product can be paired successfully -
Forward.Back and turn
Press the up arrow button on the remote control to move the product forward, and click the down button on the remote control to move the product back and turn -
Spray Function
-
Please makes sure there is water inside _the water tank before usrng the spray function
-
Fill the dropper with water, open the lid and pour the water in the dropper into the water PXE injection port, cover the water injection port after completion
-
Press these 3 spray buttons once to light spray.divided into 3 spray modes.
-
Music
Press the sound key once to play music,
press and hold for 3 seconds to turn off all sounds. -
Demo
Press these 2 demo keys once to perform an automatic demo, divide into 2 demo modes. -
According to the instructions provided in the manual. Some of the parts need to be assembled and adjusted by adults.
-
Please use it under the guidance of an adult.
-
Please promptly put away the packing materials so as not to cause harm to children.
-
Do not operate on a location where water is trapped or under the rain. Parts of the product may malfunction if exposed to water.
-
Do not touch the rotating wheel to avoid injury.
-
The product contains small parts that may pose a risk of ingestion or suffocation.
-
To remotely control the product on the road or in a crowd to avoid accidents
-
Disconnect the rechargeable USB cable before cleaning, the toy.
-
lf you observe electrical charges during product usage turn off the device immediately.
-
When installing or replacing the battery, pay attention to the correct polarity of the battery.
-
The product uses l.SV aa batteries
-
lt is strictly prohibited to do the following actions such as but not limited to disassembling, modifying, crashing, puncturing, dropping, throwing in a fire or any other means of causing damage to the product to avoid harm to the user and other participants.
-
Do not expose the battery to prolonged exposure to sunlight to prevent danger.
-
lt is advisable to store the battery at a temperature below 30°C Do not store it in a place wtih heat, high temperature, or humidity to avoid danger.
-
. Non-rechargeable batteries cannot be charged.
-
Do not mix old and new or different types of batteries.
-
Do not disassemble the battery or modify the battery to avoid the risk of fire or explosion
-
After the battery is used, it should be taken out of the product.
-
Stop using the battery as soon as it gives a foul smells or suddenly becomes hot, deformed, discolored, or other abnormal situation during use or charging.
-
Drained batteries should be removed immediately.
-
Do not cause the electrical supply of the wiring port to short circuit.
-
lf you do not use the product for a long time, remove the batteries of the remote control car and remote control.
-
instructions contain important product information,please give time to read for a better product experience.
GENERAL INFORMATION
FCC Notise:
This device complies with Prat 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, according to Part 15 of the FCC Rules. These Limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and,
If not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio of television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Measures:
- Reorient or relocate the receiving antenna.
- Increase the distance betwenn the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator& your body.
IC Notice:
This device complies with Canada’s Industry licence-exempt RSS
standard(s).Operation is subject to the following two conditions;
- This device may not cause interference; and
- This device must accept any interference. Including interference that may cause undesired operation of the device.
RF Exposure
Radiation Exposure Statment;
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equiment should be installed and operated with
a minimum distance 20cm between the radiator& your body.
BATTERY WARNING
-
Failure to follow all the instructions may result in serious injury, irreparable, damage to the battery and may cause a fire, smoke or explosion.
-
Always check the battery’s condition before charging or using it.
-
Replace the battery if damaged, gives a foul odor or show signs of overheating, discoloration, deformation and leakage.
-
Never use anything other than the approved charger battery. Always use a balancing charger for battery. It is recommended that you do not to use any other charger than the one provided with the product.
-
The battery temperature must never exceed 60°C (140’F) otherwise the battery could be damaged or ignite.
-
Never charge on a flammable surface,near flammable products or inside a vehicle(preferably place the battery in a non-flammable and nonconductive container).
-
Never expose the battery to moisture or direct sunlight,or store it in a p7lace where temperatures could exceed 60°C (car in the sun,for example)
-
Always keep it out of reach from children.
-
.lmproper battery use may result in a fire, explosion or other hazard
-
Non-rechargeable batteries are not charged again, Rechargeable batteries are only to be charged with the supervision of an adult.
-
Different types of batteries or new or used batteries which are different are not be mixed.
-
Batteries are to be inserted with the correct polarity.
-
The supply terminal should be used well to avoid a short circuit.
Examination of the transformer and battery charger regularly is encouraged to check any damage in the cord,plug, enclosure and other parts. If damage is observed,it must not be used until it has been repaired. -
The packaging has to be kept since it contains important information.
-
The toy is only to be connected to Class II equipment bearing the symbol.
MANUFACTURER INFORMATION
- Manufactured by
- Shantou Chenghai Nanhong Toys Factory No. 1-1,
- Huangqingmang, Longtian, Guangyi Street,
- Chenghai District, Shantou City, Guangdong Province
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.