UMEXUS Cordless Rechargeable LED Table Lamp User Manual
- June 1, 2024
- UMEXUS
Table of Contents
UMEXUS Cordless Rechargeable LED Table Lamp
Thank you
Thank you for choosing the table lamp. Please read these operating instructions carefully and keep them for future reference. If you need help, please contact us.
Specification:
Material: Metal base & acrylic shade
Lamp Beads: 16 pcs LED beads
Switch: Touch switch
Input: 5V USB
Power: 3.5W
Battery Capacity: 2000mAh
Time to Fully Charge: 4~6 hours
Waterproof Rating: IP54
Features:
- Great for dinner, bedside, mantle, RV, camping, no power cord required.
- Metal with scratch-resistant oxidation surface.
- Acrylic diffuse panel provides warm white light.
- Stepless Dimmable.
- Built-in rechargeable battery.
- The lamp can be used up to 48 hours((Lowest Brightness)) after a full charge.
Assembly & Installation Instructions
Step 1: Place all the components on the countertop.
Step 2: Loose the finial part counterclockwise from the light tube and
put it on the table.
Step 3: Screw the light tube clockwise on the metal lamp body.
Step 4: Put the lamp shade over the light tube.
Step 5. Screw the finial part clockwise to light tube, ensure all the components are tightened.
How to Use:
- Please charge the lamp at least 4 hours before the first use to extend the battery life. The LED indicator over the charging port turns from red to green when fully charged.
- Press the power button under the base of the lamp and the touch switch will be on standby mode in one second.
- Touch the lamp switch to switch between ON – WARM COLOR – WHITE COLOR – WARM WHITE COLOR – OFF.
- Touch and hold the lamp switch to adjust the brightness (max-min or min-max).
- Please completely turn off the lamp by pressing the power button if the lamp is put away or not used for a long time.
Attention:
- Small Parts are included. Children under 5 years old should use it under adult supervision.
- Use a certified USB adapter for charging (output 5 V=1 A).
- Built-in battery, please keep away from fire.
- The lamp is controlled by 2 switches. the bottom of the lamp has one green on/off button and this button is turned off by default in transit for safety, so you need to press the button when first use.
Accessories in the package:
1 x Lamp
1 x Manual
1 x Charging cable
1 x UL Certified Charging Adapter
CUSTOMER SUPPORT
Email: [email protected]
Distributor: Heat valley USA, Inc.