Hisense I6433C7 Induction Hob Instruction Manual

Hisense I6433C7 Induction Hob

Product Information

Specifications

• Product: Induction hob
• Safety Precautions: Included
• Technical Data: Provided

Product Usage Instructions

Safety Precautions
Follow all safety precautions outlined in the manual to ensure safe operation of the induction hob.

Before Connecting the Appliance
Check for any transport damage and contact the seller if the damage is found. Refer to the invoice or delivery note for contact information.

• Appliance Description
  Read through the description to familiarize yourself with the features of the induction hob.

• Technical Data
  Review the technical data provided to understand the specifications and capabilities of the appliance.

• Before First Use
  Before using the induction hob for the first time, ensure all components are in place and follow any initial setup instructions.

• Hob
  Understand the layout and functionality of the hob surface before starting to cook.

• Operating the Cooking Hob
  Follow the instructions for operating the cooking hob, including adjusting settings and using different cooking zones.

• Control Unit
  Familiarize yourself with the control unit and how to adjust settings for optimal cooking results.

• Switching On the Hob
  Learn how to properly switch on the induction hob to start cooking.

• Switching On the Cooking Zones
  Activate specific cooking zones as needed for your cooking requirements.

• Changing the Cooking Zone Settings
  Adjust the settings of the cooking zones to control temperature and cooking parameters.

• Automatic Rapid Heating
  Utilize the automatic rapid heating feature for quick cooking preparation.

• Bridged Cooking Zone
  Combine two cooking zones for larger cookware or specialized cooking techniques.

• Pan Position Recognition with Automatic Bridging of Cooking Zones
  Allow the hob to automatically adjust when using larger pans across multiple zones.

• Power Boost
  Enhance cooking performance with the Power Boost function for faster heating.

• Overheat Protection
  Understand how the overheat protection feature works to ensure safety during cooking.

• Child Lock / Lock
  Activate the child lock feature to prevent accidental operation by children or unauthorized users.

• Defrosting/Reheating
  Use the induction hob for defrosting or reheating food items as needed.

Frequently Asked Questions (FAQ)

How do I clean the induction hob?

Refer to the cleaning instructions in the manual. Typically, use a damp cloth with mild detergent for regular cleaning.

Can I use any type of cookware on the induction hob?

Induction hobs require compatible cookware. Use pots and pans with a magnetic bottom for best results.

What should I do if an error code appears on the display?

Consult the manual for error code explanations and troubleshooting steps. If unsure, contact customer support for assistance.

We thank you for your trust and the purchase of our appliance.
This detailed instruction manual is supplied to make the use of this product easier. The instructions should allow you to learn about your new appliance as quickly as possible. Make sure you have received an undamaged appliance. If you do find transport damage, please contact the seller from which you purchased the appliance, or the regional warehouse from which it was supplied. The telephone number can be found on the invoice or on the delivery note.
INFORMATION!
Information, advice, tip, or recommendation
WARNING!
Warning – general danger

Safety precautions

IMPORTANT SAFETY PRECAUTIONS – CAREFULLY READ THE INSTRUCTIONS AND SAVE THEM FOR FUTURE REFERENCE.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
• Children less than 8 years of age shall be kept away unless continuously supervised.
• Do not use steam cleaners or high-pressure cleaners to clean the appliance, as this may result in an electric shock.
• The appliance is not intended to be controlled by external timers or separate remote controll system.
• Means that disconnection must be incorporated in the fixed wiring by the wiring rules.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or. similarly qualified persons in order to avoid a hazard (only for appliances supplied with connection cord).
• WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. Switch off all cooking zones using their respective controls and remove the fuse or trip the main circuit breaker so that the appliance is fully isolated from the power mains.
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire proof blanket.
• WARNING: Danger of fire: do not store items on the cooking surfaces.
• CAUTION: The cooking process has to be supervised. A short-term cooking process has to be supervised continuously.
• CAUTION: This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
• Metalic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
• After use, switch off the hob element by its control and do not rely on the pan detector.
• Appliance must be connected to fixed wiring which has incorporated means of disconnection. Fixed wiring must be made in accordance with the wiring rules.

Other important safety warnings

• The appliance is intended for household use.
• Do not use it for any other purpose, such as room heating, drying of pets or other animals, paper, fabrics, herbs etc.
• As this may lead to injury or fire hazard.
• Appliance must be connected to fixed wiring which has incorporated means of disconnection.
• Fixed wiring must be made in accordance with the wiring rules.
• If another electrical appliance is connected to an AC power socket near the appliance, make sure the power cord does not come in to contact with hot cooking zones.
• If the power cord is damaged, it should be replaced by the manufacturer or an authorised service technician, in order to avoid hazard.
• Using the glass ceramic hob as a storage area may result in scratches or other damage to it.
• Never heat food in aluminium foil or in plastic containers on the cooking hob.
• Such foil or containers may melt which can result in a fire or damage to the cooking hob.
• Do not store temperature-sensitive items underneath the appliance, such as cleaners or detergents, spray cans etc.
• Eventual mismatches in colour shades between different appliances or components within a single design line may occur due to various factors, such as different angles under which the appliances are observed, different coloured backgrounds, materials, and room illumination.

Before connecting the appliance

WARNING!
Carefully read the instructions for use before connecting the appliance. Repair or any warranty claim resulting from incorrect connection or use of the appliance shall not be covered by the warranty.

Appliance description

INFORMATION!
Appliance functions and equipment depend on the model.

1. Induction cooking zone ø 210 mm
2. Induction cooking zone ø 180 mm
3. Induction cooking zone ø 145 mm
4. Cooking hob control module

Technical data (depending on the model)

• A. Serial number
• B. Code
• C. Type
• D. Trademark
• E. Model
• F. Technical data
• G. Compliance indications/symbols

The rating plate with basic information on the appliance is located on the bottom side of the cooking hob. Information on appliance type and model can be found on the warranty sheet.

Before first use
If your hob has a glass ceramic surface, clean it with a damp cloth and some washing-up liquid. Do not use aggressive cleaners, such as abrasive cleaners that could cause scratches, abrasive dishwashing sponges, or stain removers.
During initial use, the characteristic “new appliance smell” may appear; it will gradually disappear.

Hob

• Glass ceramic cooking surface

  • The hob is resistant to temperature changes.
  • Do not use the glass ceramic hob if it is cracked or broken. If a sharp object falls on the hob, the hob may break. The consequences of such occurrence may be visible immediately or only after a while.
  • If any visible crack appears in the hob, immediately cut off the power supply to the appliance.
  • Make sure the cooking zone and the cookware bottom is clean and dry. This will allow better conduction of heat and prevent any damage to the heating surface.
  • Do not place empty cookware on the cooking zone. The cooking zone may be damaged if you place an empty pan onto it. Before placing a pan onto the cooking zone, wipe the pan bottom dry to allow conduction of heat.

• Cooking power levels
  Cooking zone heating power can be set to 10 different levels (depending on the model). The table lists some examples of use for each level. Cooking power level| Purpose
  ---|---
  0| switched off , using the residual heat
  1 – 2| keeping the food warm, slow cooking of smaller amounts (lowest setting)
  3| slow cooking (follow-up cooking after the initial power boost)
  4 – 5| slow cooking (follow-up cooking) of large amounts, pan-roasting of larger chunks
  6| searing and browning
  7 – 8| searing
  9| cooking of large amounts, searing
  P| Power Boost setting for start of the cooking process; also suitable for very large amounts of food

• Energy saving tips

  • When purchasing cookware, note that the diameter indicated on the pan usually pertains to the upper edge or the lid, which is normally larger than the diameter of the pan bottom.
  • If a dish takes a long time to cook, use a pressure cooker. Make sure there is always sufficient liquid in the pressure cooker. If an empty cooker is placed on the cooking hob, it may overheat which in turn may lead to damage to both the pot and the cooking zone.
  • Whenever possible, close the pot or pan with a suitably sized lid. Use cookware that fits the amount of food you are cooking. Cooking in a large partly full pot will consume much more energy.

• Induction cooking zone operating principle

  • The cooking hob is fitted with highly efficient induction cooking zones. The heat is generated directly in the bottom of the pan where it is needed the most. This avoids any losses through the glass ceramic surface. Power consumption is considerably lower than in conventional cooking zones with radiation heaters.
  • The glass ceramic cooking zone is not heated directly, but only indirectly with the heat radiated back by the pan. After the cooking zone is switched off, this residual heat is indicated by “H”.In induction cooking zones, heating is made possible by the induction coil installed under the glass ceramic surface. The coil induces a magnetic field which generates eddy currents in the bottom of a ferromagnetic pan, which in turn heats the pan.
    WARNING!
    If sugar or food with high sugar content is spilled over a hot class ceramic hob, immediately wipe the hob or remove the sugar with a scraper, even if the cooking zone is still hot. This will prevent any damage to the class ceramic surface.
    Do not use detergents and other cleaners to clean a hot glass ceramic hob as this could damage the surface.

• Pan recognition

  • Even if there is no pot or pan on the cooking zone or if the pan used has a diameter that is smaller than the diameter of the cooking zone, there will be no losses of energy.
  • If the pan is much smaller than the cooking zone, there is a possibility that it will not be recognized by the cooking zone. When the cooking zone is activated, the sign ****and the selected power level will flash alternately on the cooking power display.
  • If a smaller pan or pot is placed on the cooking zone and it is recognized, the hob will only use as much power as necessary given the pan size.

• Induction cookware

  • The induction will work correctly if you use suitable cookware.
  • Make sure the pot or pan is in the middle of the cooking zone
  • Suitable cookware: cookware made of steel, enamel-coated steel pans, or cast iron pans.
  • Unsuitable cookware: alloy steel cookware with copper or aluminium bottom, and glass cookware.
  • The magnet test: Use a small magnet to check whether the pan or pot bottom is ferromagnetic. If the magnet sticks to the bottom of the pan, then it is suitable for an induction cooker.
  • When using a pressure cooker, keep an eye on it until the right pressure is reached. First, set the cooking zone to maximum power; then, following the pressure cooker manufacturer’s instructions, decrease the cooking power when appropriate.
  • Make sure there is enough liquid in the pressure cooker, or any other pot or pan. Due to overheating, using an empty pot on the cooking zone may result in damage to both the pot and the cooking zone.
  • Some cookware does not have a fully ferromagnetic bottom. In such case, only the magnetic part will heat up, while the rest of the bottom will remain cool.
  • When using special cookware, observe the manufacturer’s instructions.
  • For best cooking results, the ferromagnetic area on the cookware bottom should match the size of the cooking zone. If the cooking zone does not recognize the pan, try placing it on a different cooking zone with a smaller diameter.
    Cooking zone| Minimum pan bottom diameter
    ---|---
    Ø 145 mm| Ø 90 mm
    Ø 180 mm| Ø 145 mm
    Ø 210 mm| Ø 130 mm

Operating the cooking hob

Control unit (depending on the model)

• A. Hob on/off key
  • A1. On/off/child lock indicator light
• B. Lock/child lock
• C. Defrosting/reheating key
  • C1. Defrosting indicator light
  • C2. Reheating indicator light
  • C3. Pan position recognition with automatic bridging of cooking zones D Cooking zone controls
• E. Timer functions
• F. Stop/go/memory function
  • F1. Stop/go and memory function indicator light
• H. Power decrease key
• I. Power increase key
• J. Power level displays
  • J1. Decimal point indicating half-step power level for the cooking zone K Program timer on/off
• L. Program timer setting key (–)
  • L1. Indicator light for active program timer on respective cooking zones M Program timer setting key (+)
• N. Time display

Display units also work as keys for adjusting the settings.

Switching on the hob

• Place the cookware onto the cooking hob.
• Touch the on/off key (A) to switch on the hob.
• “0” will appear on all cooking zone displays.
• A short beep will be emitted.

INFORMATION!
If no cooking zone is switched on in 10 seconds, the cooking hob will power off.

Switching on the cooking zones

• Touch the display unit for the desired cooking zone. The selected display unit will flash.
• Use the (H) and (I) key to set the operating power of the selected cooking zone.
• The cooking zone remains activated.
• If the hob does not recognize any pan on the selected cooking zone, the symbol .appears. If you do not place a pan on the selected cooking zone within 2 minutes, the cooking zone will automatically switch off.

INFORMATION!
Display units also work as keys for adjusting the settings.

Changing the cooking zone settings

• Power level for the selected cooking zone can he adjusted using the (H) or (I) key.
• To increase or decrease the power level faster, touch and hold the (H) or (I) key.

Automatic rapid heating
All cooking zones are fitted with a special mechanism that sets the cooking power to maximum at the start of the cooking process, regardless of the actual power setting. After a while, the cooking zone power switches back to the initially set level. Automatic rapid heating can be activated on every cooking zone for any cooking power level except for level “9” and “P”.

The auto rapid heating function is suitable for dishes that have to be heated up and then cooked for a longer period of time without the need for constant supervision.
The auto rapid heating function is suitable for dishes that have to be heated up and then cooked for a longer period of time without the need for constant supervision.

• The hob is switched on and a suitable pan is placed on one of the cooking zones.
• Select the desired cooking zone that should be switched off (“0” appears on the display unit).
• Press the relevant (H) or (I) key and hold it for approximately 3 seconds until you hear a short beep. A and 9 will flash alternately on the display.
• A and selected power level will alternate on the power level display. When the automatic rapid heating time expires, the cooking zone automatically switches to the selected level which will then be continuously displayed.

Automatic rapid heating table

Switching off the automatic rapid heating
If cooking power is decreased while the automatic rapid heating is activated, the automatic rapid heating will be switched off for this cooking zone. The auto function can be deactivated by selecting the relevant cooking zone and decreasing the power level to “0”. Then, set the new power level.

Bridged cooking zone
(depending on the model)

• Some models allow combining two cooking zones on the left-hand side into a single large connected cooking zone. Thus, a large oval pan or a griddle can be placed on the combined cooking field. The pan has to be large enough to cover the centres of the upper and lower cooking zone.
• Maximum pan size: 40 x 25 cm. For even heat distribution, we recommend using a heavy-bottom baking dish or pan. During cooking, the dish or pan will heat up. Be careful to prevent burns.
• When placing the baking dish on the hob, make sure it does not cover the control module.

INFORMATION! The pan should always cover the centre of the cooking zone!

• Activating the bridged cooking zone

  • Switch on the cooking hob by pressing the on/off sensor (A).
  • Simultaneously touch the two sensors and hold them for 3 seconds (H). The sign will appear on the display unit for the rear field to indicate that the two cooking zones are bridged.
  • Set the desired cooking power for the bridged cooking zone.
  • To change the bridged zone’s cooking power later on, use the (H) or (I) key for the lower cooking zone.
    INFORMATION! The bridged cooking zone does not allow operation with a power boost; only power levels up to 9 are available.

• Deactivating the bridged cooking zone

  • Set the power level of the combined cooking zone to “0”. The sign will disappear and heating will be switched off.
  • Both cooking zones will operate independently.

Pan position recognition with automatic bridging of cooking zones
(only with some models)
Pan position recognition is activated automatically 10 seconds after the appliance is switched on. If there is a pan on the hob, the pan recognition function will recognize its position and automatically bridge the cooking zones depending on the size of the pan. Two adjacent cooking zones can be merged into a single large cooking zone.

The sign will appear on the display unit for the rear field to indicate that the two cooking zones are bridged.

• Set the desired cooking power for the bridged cooking zone.
• To change the bridged zone’s cooking power later on, use the (H) or (I) key for the lower cooking zone.

INFORMATION!
The bridged zone does not allow the power boost setting P. Maximum available power level is 9.

Automatic pan position recognition can be activated at any time for 10 seconds by pressing the pan recognition key (C3). Automatic pan recognition and automatic cooking zone bridging are only effective on the cooking zones that are not yet activated. Bridging of cooking zones can be deactivated by setting the power level to “0”.

• If there is no cookware on the cooking zone:

  • • Switch on the hob. All cooking zones are set to “0”.
    • Place the pan on any cooking zone. “0” starts to flash on the cooking zone with the pan. Cooking zone power can be adjusted by pressing the (H) or (I) keys for the respective cooking zone. The function automatically bridges the cooking zones on the left-hand side of the cooking hob, depending on the pan size.
    • You may continue with the next pan, using the same procedure.

• If the cookware is already on the cooking hob:

  • • Switch on the cooking hob.
    • “‘0” will flash on the display unit of the cooking zone with the cookware on it. Cooking zone power can be adjusted by pressing the (H) or (I) keys for the respective cooking zone.
    • If there are several pans on the cooking zone, the hob will automatically detect all pans and “0” will flash on display units of all zones on which a pan has been placed.

Cooking zone power can be adjusted by pressing the (H) or (I) keys for the respective cooking zone; then continue with the next cooking zone. During the first 10 seconds, automatic pan recognition can also be deactivated in user settings using the “Au” parameter. See chapter User Settings. The function can be used if the pan is already on the cooking hob or if the cooking hob is empty.

Power Boost (depending on the model)
For rapid cooking, power boost can be activated on the cooking zones. This will allow you to rapidly heat large amounts of food using extra power. The power boost is active for no more than 10 minutes; then, the power level is automatically decreased to 9. If the cooking hob is not too hot, the power boost can be reactivated for 10 minutes after it is switched off. To avoid overheating, the electronic control function may automatically switch off the Power Boost earlier and decrease the power level to 9.

• Activating the Power Boost
  The hob is switched on and a suitable pan is placed on one of the cooking zones.

  • Select the cooking zone.
  • Set the power level to 9, then press the (I) key.
  • Symbol “P” will appear on the display. The function is activated.

• Deactivating the Power Boost

  • Press the (H) key. Power boost will be deactivated and operating power will return to level 9.
  • Power can be decreased to desired level by pressing the (H) key.

Overheat protection

• The hob is fitted with a cooling fan which cools the electronic components during cooking. The fan may operate for a while even after the end of the cooking process.
• Induction cooking hob is also fitted with an overheating protector which protects the electronic components from damage. The protector operates at several levels. When the cooking zone temperature gets very high, the cooking power is automatically reduced. If this does not suffice, the cooking zone power continues to decrease, or the safety mechanisms switches off the cooking zone completely. In such case, the display unit will read “”F2””. When the cooking hob is cooled down, its total power will be available again.

Child lock / lock
The cooking hob can be locked against unintended activation.
INFORMATION! The cooking hob has to be switched off or in the standby mode.

• Locking the cooking hob controls
  Touch the on/off key and hold it for 3 seconds. “L” will appear on the cooking zone power displays. The cooking hob is now locked. After 5 seconds, the cooking hob will automatically switch off to standby mode.

• Unlocking the cooking hob controls
  To unlock the cooking hob, proceed in the same way as for locking it. The hob must be switched off. Touch the on/off key and hold it for 3 seconds. “L” on the cooking zone power indicators will turn to “0”. The cooking hob is now unlocked and ready for use.

INFORMATION!
Note: If the child lock/lock function (B) is activated in the user settings mode (see chapter User Settings Mode, Parameter “Loc”), then the hob will be automatically locked every time it is switched off.
INFORMATION! Activate the lock function before cleaning to prevent the hob from being inadvertently switched on.

Defrosting/reheating
Press the (C) key to activate the defrosting/reheating function. In case of defrosting, food temperature is maintained at around 42 °C; in case of reheating, it is maintained at around 70 °C. Actual temperature may depend on the type of cookware and amount of food.

• Activating the defrosting function
  Press the (A) key to switch on the cooking hob. Place the suitable pan on the selected cooking zone. Touch the (C) key once; the indicator light (C1) will light up. Touch the (H) or (I) key for the selected cooking zone. The symbol “u” will appear on the display.

• Activating the defrosting function
  Press the (A) key to switch on the cooking hob. Place the suitable pan on the selected cooking zone. Touch the (C) key once; the indicator light (C1) will light up. Touch the (H) or (I) key for the selected cooking zone. The symbol “u” will appear on the display.

• Deactivating the defrosting/reheating function

  • Touch the (H) or (I) key for the selected cooking zone.
  • The cooking zone will switch off and “0” will appear on the display unit.

Time functions
This function allows two operating modes:

• Setting the minute minder (countdown timer) function applies to the entire cooking hob. With this function, the hob only beeps when the set time expires.
• Program timer setting applies to the selected cooking zone. A separate timer can be set for each cooking zone. When the set time expires, the cooking zone is automatically switched off.

1. Countdown timer

The minute minder operates independently and it is not related to the operation of any cooking zone. When the countdown timer is set, it will continue to count down the time even if you switch off the cooking hob. The minute minder can only be switched off when the cooking hob is on.

  * Touch the (K) key to activate the timer. “00” will appear on the timer display (O). Touch the (L) and (M) keys to set the time in the range from 1 to 99 minutes.
  * After the set time expires, alarm will be activated; however, the cooking zone will not be switched off.
  * Switch off the alarm by touching any key; alternatively, it will switch off automatically after a certain period of time.
  * The minute minder function will remain activated even when the cooking hob is switched off using the (A) key.
  * During the last minute of countdown, remaining time will be displayed in seconds.

2. Program timer
   The program timer makes the cooking process easier by allowing you to see and set the cooking time for the selected cooking zone. When the time set on the timer expires, the cooking zone will automatically switch off and emit an acoustic signal. Switch of the acoustic signal by touching any key; alternatively, it will switch off automatically after a while. The switch-off program timer can be set independently for all cooking zones. The program timer may only be set for an active cooking zone.

   • Touch the (K) key to activate the timer. “00” will appear on the timer display (O). Touch the (K) sensor key again. The point (L1) for the relevant cooking zone will start to flash.
   • Touch the (L) and (M) keys to set the time in the range from 1 to 99 minutes.
   • When the desired value is set, the countdown begins. The point (L1) indicating which cooking zone the timer function is set for will continue to flash.
   • After the set time has expired, acoustic signal will be activated and the cooking zone will be switched off. “00” will flash on the clock display.
   • Switch off the alarm by touching any key; alternatively, it will switch off automatically after a certain period of time.

• Changing the set cooking time
  Remaining cooking time can be changed at any time during cooking. Touch the power-off timer key (K) to select the timer display for the desired cooking zone. The relevant indicator light (L1) will flash. Touch the (L) or (M) key to set a new desired cooking time.

• Displaying the remaining cooking time
  If several timer settings are activated, remaining cooking time can be displayed by touching the (K) key.

• Timer reset
  Select the desired timer display by pressing the (K) key (see section Changing the set cooking time). The set timer will be displayed and the indicator light for the relevant cooking zone will light up. Touch the (M) key to set the value to “00”, or press the (L) and (M) keys simultaneously to immediately reset the value to “00”.

Pausing the cooking process – Stop &Go (pause)
The Stop&Go function can be used to pause the operation of the entire cooking hob for up to 10 minutes. All cooking zones will temporarily switch off automatically. This is convenient when, for example, the contents of one of the pans has boiled over and you wish to clean the cooking hob.

• Activating the Stop &Go function
  At least one cooking zone must be active. Touch the Stop&Go function key (F). A short beep will be emitted. All settings on display units start to flash; the pause key will be lit and it will also flash. All program timer or minute minder settings are paused. All keys are inactive, except for the pause (stop/go) key and the on/off key. If you do not press any key within 10 minutes, all active cooking zones will switch off automatically.

• Deactivating the Stop &Go function
  Press the pause key again within 10 minutes. The cooking hob continues to operate with the same settings as before the pause.

Memory function
This function allows you to retrieve all cooking zone settings if the cooking hob was accidentally switched off. However, this can only be done within five seconds after the hob has been switched off.
Use the on/off key to switch the cooking hob back on within 5 seconds after it has been switched off. The key (F) will flash on the display unit for 5 seconds. Within that time, touch this key and all settings that were active just before the hob was switched off will be restored.

Automatic switch off
If the keys are activated for too long during cooking (e.g. due to spilt liquid or an object placed over
the sensor keys), all cooking zones will be switched off after 10 seconds. The symbol will flash on the display. The object should be removed, or the spilt liquid should be cleaned, from the sensor keys within 2 minutes; otherwise, the cooking hob will switch off automatically. The most recent settings can be restored with the memory function using the Stop&Go key

Switching off the cooking zone
To switch off a cooking zone, use the relevant (H) key to set the value to “0”. To quickly switch off the cooking zone, touch the relevant (H) and (I) keys simultaneously. You will hear a short beep, and “0” will be displayed on the display unit.

INFORMATION! If the power of all cooking zones is set to “0”, the cooking zone will switch off automatically after 10 seconds.

Residual heat indicator
The glass ceramic hob is also fitted with a residual heat display, “H”. The glass ceramic cooking zone is not heated directly, but only indirectly by the heat radiated back by the pan. As long as the symbol “H” is lit up after the hob has been switched off, there is residual heat in the cooking zone, which can be used to keep the food warm or for defrosting. When the “H” sign disappears, the cooking zone may still be hot. Be careful as there is danger of burns!

Maximum cooking time
For safety, the cooking time for each cooking zone is restricted to a maximum duration.
Maximum cooking time depends on the most recently set power level. If the power level is not changed, the cooking zone will be switched off automatically after the maximum cooking duration is reached.

Cooking power level| U| u| 1| 2| 3| 4| 5| 6| 7| 8| 9| **P*
---|---|---|---|---|---|---|---|---|---|---|---|---
Maximum operating time (hours)**| 2| 8| 8| 8| 6| 6| 4| 4| 2| 1,5| 1,5| 1,5

• After 10 minutes, the power level automatically decreases to 9; after 1.5 hours, the cooking zone is switched off.

Switching off the entire cooking hob
The cooking hob can be switched off at any time by touching the on/off key.

User settings

Setting the acoustic signal, automatic features, and lock parameters
You can adjust the volume of the acoustic signal, duration of acoustic alarm, total maximum appliance power, and automatic lock settings. To activate the parameter settings menu, press the pause key (F) when the appliance is switched off, and hold it for 3 seconds.

The first parameter “Uo” will appear on the timer display, indicating the volume (loudness) of acoustic signals. Use the timer key (K) to select the type of parameter. Press the timer setting keys (L) and (M) to adjust the setting.

• Uo: Acoustic signal and alarm volume (loudness)
• So: Acoustic alarm duration
• Lo: Automatic lock
• Au: Automatic pan recognition
• Po: Total maximum power

The currently set parameter value will appear on the right-hand side cooking zone power level displays. The value can be adjusted by pressing the (H) or (I) keys for the cooking zone. All parameters can be confirmed and stored by pressing the pause key (F) and holding it for 2 seconds. Then, a short beep will be sounded. If you do not wish to store the new parameter settings, close the user settings mode by pressing the on/off key.

Acoustic signal and alarm volume (loudness) “Uo”
The following values can be set:

• 00 on the display = off (does not apply to alarm and error acoustic signal)
• 01 on the display = minimum volume
• 02 on the display = medium volume
• 03 on the display = maximum volume (default)

A short acoustic signal will be sounded upon every change, with the newly set volume.

Acoustic alarm duration “So”
The following values can be set:

• 05 on the display = 5 seconds
• 1.0 on the display = 1 minute
• 2.0 on the display = 2 minutes (default)

Child safety lock “Lo”
If the automatic lock function is activated in the user settings mode, the cooking hob will be automatically locked every time it is switched off.

• 00 on the display = off (default)
• 01 on the display = on

Pan position recognition with automatic cooking zone bridging “Au”
If the function of pan position recognition with automatic cooking zone bridging is deactivated in the user settings mode, then the appliance will always be operated manually (there will be no 10-second automatic pan recognition every time the appliance is switched on).

• 0 on the display = off
• 1 on the display = on (default)

Total maximum power “Po”
If the electric installation in your home has different current limits, maximum power consumption of the cooking hob can be reduced:

• 6.0 on the display = 6.0 kW = 2 × 16 A
• 7.2 on the display = 7.2 kW = 2 × 16 A (default)

INFORMATION!
If the power level is limited, the settings and the resulting cooking power can be limited as well. The appliance is fitted with a power management system that makes sure the effect of power limiting is minimal.

Cleaning and maintenance

After each use, wait for the glass ceramic surface to cool down and clean it. Otherwise, all remaining impurities will burn onto the hot surface the next time you use the hob. For regular maintenance of the glass ceramic hob, use special care products that create a protective film on the surface to prevent the dirt from sticking onto it. Before each use of the glass ceramic surface, wipe off the dust or any other impurities that could scratch the surface, from both the hob and the pan bottom.

INFORMATION! Steel wool, coarse cleaning sponges, and abrasive powders may scratch the surface. The surface may also be damaged by aggressive spray cleaners and unsuitable liquid cleaners.

• Signage may be worn when using aggressive or abrasive cleaners or cookware with coarse or damaged bottom.
• Use a damp soft cloth to remove minor impurities. Then, wipe the surface dry.
• Remove water stains with a mild solution of vinegar. However, do not use this solution to wipe the frame (only with some models) as it may lose its sheen. Do not use aggressive spray cleaners or descaling agents.
• Use special glass-ceramic cleaners for stubborn dirt.
• Observe the manufacturer’s instructions. Be sure to thoroughly remove any cleaner residues after the cleaning process as they may damage the glass ceramic surface when the cooking zones heat up.
• Remove stubborn and burnt residues with a scraper. Be careful when handling the scraper to prevent injury.

INFORMATION! The scraper is not included in appliance equipment.

INFORMATION!

• Only use the scraper when dirt cannot be removed with a wet cloth or special cleaners for glass ceramic surfaces.
• Hold the scraper at the correct angle (45° to 60°).
• Gently press the scraper against the glass and slide it over the signage to remove the dirt.
• Make sure the plastic handle of the scraper (in some models) does not come into contact with a hot cooking zone.

INFORMATION! Do not press the scraper perpendicularly against the glass and do not scratch the hob surface with its tip or blade.

Immediately remove any sugar or sugar-laden food from the glass ceramic hob using a scraper, even if the hob is still hot, as sugar may permanently damage the glass ceramic surface.

Troubleshooting table

• During the warranty period, only a service center authorized by the manufacturer may carry out any repairs.
• Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse or by disconnecting the power plug from the wall outlet.
• Any unauthorized repairs of the appliance may result in electric shock and short circuit hazard; therefore, do not perform them. Leave such work to an expert or a service technician.
• In case of minor problems with appliance operation, check this manual to see if you can fix the problem yourself.
• If the appliance is not operating properly or at all due to inappropriate operation or handling, a visit from a service technician shall not be free of charge, even during the warranty period.
• Save the instructions for future reference and pass them on to any subsequent owners or users of the appliance.

Following is some advice on rectifying some common problems.

object placed over the sensors.

Wipe the sensor surface.

F2 on the display| Cooking zone has overheated. Wait for the cooking zone to cool down.
F on the display| This indicates that there has been an error during operation.

If the problems persist despite observing the above advice, call an authorized service technician. Repair or any warranty claim resulting from incorrect connection or use of the appliance shall not be covered by the warranty. In this case, the user will cover the cost of repair.

WARNING! Before the repair, disconnect the appliance from the power mains (by removing the fuse or by removing the plug from the wall outlet).

Noises during induction cooking

the properties of some metals under electromagnetic effect. It results in so- called eddy currents that force the molecules to oscillate. These oscillations (vibrations) are transformed into heat. Depending on the type of metal, this could result in quiet noises.| This is normal and it is not a result of any malfunction.
Transformer-like buzz| Occurs when cooking at a high power level. The reason for this is the amount of energy transferred from the cooking hob to the pot or pan.| This noise will disappear or weaken when you reduce the power level.
Vibration and crackling of the cookware| This noise appears in cookware (pots or pans) made of different materials.| It results from vibrations along the adjacent surfaces of different material layers. This noise depends on the cookware. It can vary depending on the amount and type of food being cooked.
Fan noise| Correct operation of induction electronic components requires temperature control. Therefore, the cooking hob is fitted with a fan that cools the electronics depending on the sensed temperature.| The fan may operate even after the cooking hob has been switched off, if the temperature remains too high.

Installing a built-in hob

Installation procedure

• The worktop has to be completely level.
• Suitably protect the edges of the cut aperture.
• Connect the cooking hob to the mains power supply (see instructions for the connection of the cooking hob to mains power supply).
• Insert the hob into the cut aperture.
• Installation of the appliance into a kitchen worktop and its connection to the power mains may only be performed by an adequately qualifi ed technician.
• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be built in should be treated with heat resistant glue (100°C); otherwise, the worktop fi nish may be discolored or deformed.
• Use of solid wood corner trims on worktops behind the cooking hob is only allowed if the clearance between the trim and the cooking hob is no smaller than indicated on the installation plans.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen furniture, with a width of 600 mm or more.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to interfere with the work process.
• The distance between the cooking hob and the kitchen hood should be no less than indicated in the instructions for kitchen hood installation. The minimum distance is 500 mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture element should amount to no less than 40 mm.
• Use of solid wood corner trims on worktops behind the cooking hob is only allowed if the clearance between the trim and the cooking hob is no smaller than indicated on the installation plans.
• Minimum distance between the built-in cooking hob and the rear wall is indicated on the installation drawing.

Air vents in the lower kitchen cabinet
INFORMATION! Normal operation of the induction cooking hob electronic components requires sufficient air circulation.

• Lower cabinet with a drawer
  • There must be an opening with a height of no less than 140 mm along the entire width of the cabinet in the cabinet rear wall. In addition, there should be an opening of at least 6 mm in the front side, along the entire width of the cupboard.
  • A horizontal partition panel should be installed underneath the cooking hob along its entire length. There should be at least 10 mm of clearance between the lower end of the appliance and the partition panel. Adequate ventilation should be allowed from the rear side.
  • The hob is fitted with a fan located in its lower part. If there is a drawer below the kitchen cabinet, do not use it to store small objects or paper as these could, if sucked into the fan, damage the fan and the cooling system. Moreover, do not use the drawer to store aluminium foil or flammable substances or liquids (such as sprays). Keep such substances away from the cooking hob. Danger of explosion!
  • There should be at least 20 mm of clearance between the contents of the drawer and the fan inlet vents.
• Lower cabinet with an oven
  • Installing an oven under the induction hob is possible for oven types with a cooling fan.
  • Before installing the oven, the kitchen cabinet rear wall has to be removed in the area of the opening for installation.
  • In addition, there should be an opening of at least 6 mm on the front side, along the entire width of the cabinet.
  • If other appliances are installed under the induction cooking hob we cannot guarantee their correct operation.

Flush-mount installation into the worktop
Appliances without faceted edges or decorative frames, are suitable for flush mounting.

• Installing the appliance
  The appliance may only be installed into a temperature- and water-resistant countertop, such as a countertop made of (natural) stone (marble, granite), or solid wood (the edges along the cut-out have to be sealed). When installing into a countertop made of ceramics, wood, or glass, a wooden sub-frame should be used. The frame is not supplied with the appliance. The appliance may only be installed into a countertop made of other materials after you have consulted the countertop manufacturer and obtained his express approval. Internal dimension of the basic unit should be at least equal to the internal cutout for the appliance. This will allow simple removal of the appliance from the countertop. Attach sealing tape along the perimeter of the bottom of the glass panel.
  First, feed the power cord through the cutout. Place the appliance over the centre of the cutout. Connect the appliance to the power mains (see instructions for connecting the appliance). Before sealing the appliance, test its operation. Seal the slot between the appliance and the countertop using a silicone sealant. The silicone sealant used to seal the appliance has to be temperature-resistant (to at least 160 °C). Smooth out the silicone sealant using a suitable tool. Observe the instructions for use of the selected silicone sealant. Do not switch on the appliance until the silicone sealant has dried completely.
  WARNING! Pay particular attention to built-in dimensions with (natural) stone countertops. When choosing the silicone sealant, observe the countertop material and consult the countertop manufacturer. Use of inappropriate silicone sealants can result in permanent discolouration of some parts.

• Removing the built-in appliance
  Disconnect the appliance from the powermains. Use a suitable tool to remove the silicone gasket from the perimeter. Remove the appliance by pushing it upwards from the bottom side.

  • WARNING! Do not attempt to remove the appliance from the upper side of countertop.
  • WARNING! The service department shall only be responsible for repair and servicing of the cooking hob. Consult your specialized kitchen equipment dealer regarding the re-installation (of the flush-mount) cooking hob.

• Stone countertop

1. Countertop
2. Appliance
3. Slot  

Given the margin of error (tolerance) for the glass ceramic plate of the appliance, and the cutout in the countertop, the slot is adjustable (min.2 mm).

• Ceramic, wooden, or glass countertop

1. Countertop
2. Appliance
3. Slot
4. Wooden frame, thickness 16 mm  

Given the margin of error (tolerance) for the glass ceramic plate of the appliance, and the cut-out in the countertop, the slot is adjustable (min. 2mm). Install the wooden frame 5.5mm below the upper edge of the countertop (see figure).
Observe the radii of glass edges (R10, R2) when making the cut-out.

WARNING! If the oven is installed under a flush-mounted cooking hob, then the worktop thickness should be at least 45 mm.

Fitting the foam gasket
INFORMATION! Some appliances come with the gasket already fitted!
Before installing the appliance into a kitchen worktop, attach the foam gasket supplied with the appliance to the bottom side of the glass ceramic hob. Remove the protective film from the gasket. Attach the gasket to the bottom side of the glass (2–3 mm away from the edge). The gasket has to be applied along the entire edge of the glass. The gasket may not overlap in the corners. When fitting the gasket, make sure it is not damaged by or in contact with any sharp objects.

WARNING! Do not install the appliance without the gasket!

Connecting the cooking hob to the power mains

• Power mains protection must conform to the relevant regulations.
• Before connecting the appliance, make sure the voltage specified on the rating plate conforms to the voltage of the power mains.
• There should be a switching device in the electrical installation that can disconnect all poles of the appliance from the power mains, with a minimum clearance of 3 mm between the contacts when open. Suitable devices include fuses, protective switches etc.
• The connection should be adjusted to the current and fuses.
• After installation, the parts carrying electrical current and insulated parts shall be protected against contact.

WARNING!
The appliance may only be connected by an authorised expert. False connection can destroy parts of the appliance. In such case, there is no right to warranty! Disconnect the appliance from the power mains before any repair or maintenance operation.

Connection diagram

• Connecting the appliance 60 cm

1. Check the voltage. Before connecting the appliance, make sure the voltage specified on the rating plate conforms to the voltage of your power mains. The voltage of your power mains (220–240 V between L and N) should be checked by an expert using an appropriate measuring device.
2. Open the cover of the connection terminal box.
3. Connect the wires according to your type of appliance.
4. The jumpers are provided on the connection terminal.

• Power cord
  (appliance without a power cord)

  • The following may be used for connection:
  • PVC insulated connection cables type H05 VV- F or H05V2V2-F with yellow-and-green protective conductor, or other equivalent or superior cables.
  • Exterior cable diameter should be at least 8.00 mm.
  • Run the power cord through a cord strain relief (clamp) which * Ferrules are not supplied.

INFORMATION!
We recommend using electric wire ferrules (end terminals).

Connection diagram

• Single phase connection (32 A)

  • Single-phase connection (1 1N, 220–240 V~ /50–60 Hz):
  • Voltage between line and neutral conductor is 220–240 V~. Install a jumper between terminals 1 and 2, and between terminals 4 and 5.
  • The circuit should be fitted with a fuse of at least 32 A. Power cord core cross-sectional area should be at least 4 mm².

• 2-phase connection (16A)

  • 2 phases, 1 neutral conductor (2 1N, 380–415 V~ /50–60 Hz):
  • Voltage between the line and neutral conductor is 220–240 V~.; voltage between lines is 380–415 V~. Install a jumper between the terminals 4 and 5. The circuit should be fitted with at least two fuses of at least 16 A each. Power cord core cross-sectional area should be at least 1.5 mm².
  • 2 phases, 2 neutral conductors (2 2N, 220–240 V 2 2N ~ /50–60Hz):
  • Voltage between phases and neutral conductor is 220-240 V~.
  • The circuit should be fitted with at least two fuses of at least 16 A each. Power cord core cross-sectional area should be at least 1.5 mm².

• Appliances with a width of 30 centimetres (two cooking zones) only allow single-phase connection. The diameter of the power cord should be at least 1.5 mm²!

• Connecting the power cord
  (appliance with a power cord)

  • The appliance has to be hard-wired directly to the power mains.
  • Devices for disconnecting from the power mains have to comply with the relevant regulations.
  • Do not extend the power cord and do not lead it over sharp edges.
  • If the appliance is installed above an oven, make sure the power cord is never in contact with the oven’s hot parts.

• Single-phase connection
  Connect the appliance as shown in Diagram A. If your power mains do not allow a 32 A fuse, the appliance power should be decreased or limited accordingly.
  See chapter User Settings.

• Two-phase connection

  • If your electric mains have 2 line conductors and 1 neutral conductor, connect the appliance as shown in Diagram B.
  • If your electric mains have 2 line conductors and 2 neutral conductors, connect the appliance as shown in Diagram C.

• Connecting the appliance 30 cm

1. Check the voltage. Before connecting the appliance, make sure the voltage specified on the rating plate conforms to the voltage of your power mains. The voltage of your power mains (220–240 V between L and N) should be checked by an expert using an appropriate measuring device.
2. Open the cover of the connection terminal box.
3. Connect the wires according to your type of appliance.

Connection diagram
The circuit should be fitted with a fuse of at least 16 A.
Appliances with a width of 30 centimetres (two cooking zones) only allow single-phase connection. The cross-sectional area of the power cord core should be at least 1.5 mm²!

Disposal

Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. Take the product to an authorized collection centre for waste electric and electronic equipment processing. Correct disposal of the product will help prevent any negative effects on the environment and health of people, which could occur in case of incorrect product removal. For detailed information on removal and processing of the product, please contact the relevant municipal body in charge of waste management, your waste disposal service, or the store where you bought the product.

We reserve the right to any changes and errors in the instructions for use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>