ZAFIED Inflatable Bubble Balloon House 10FT with Pump and UL Blower Instructions

ZAFIED Inflatable Bubble Balloon House 10FT with Pump and UL Blower

Product Information

Specifications

• 10ft dia bubble with 6ft length tunnel
• 13ft dia bubble with 6ft length tunnel
• Recommended Number Of Players:
  • 2 – 4 Children
  • 2 – 3 Adults
• Product Parts:
  • Bubble House
  • 500W Pump
  • 750W Blower
  • Repair Patches
  • Valve Wrench
  • Wax for lubricating zips

Product Usage Instructions

Precautions:

• Do not enter the product until it is fully inflated.
• Make sure the product is fully fixed before using.
• Keep the blower on during the game and ensure it is not covered by debris.
• Avoid eating, drinking, or chewing while playing with the product.
• People with certain health conditions should avoid using this product.
• Adult supervision is required during setup, play, and disassembly.
• Ensure a clear space of about two meters around the product.
• Avoid using the product in windy or rainy conditions.
• Avoid bringing sharp objects or hard items inside the bubble house.

Set-Up Instructions:

1. Fully expand the product on a place free of sharp objects.
2. Find the valve and start inflating with an air pump.
3. Tighten the valve when finished.
4. Ensure the zipper on the bottom of the bubble is closed.
5. Connect the air tube to the air blower and start inflating.

FAQ

• Q: When you use the bubble house for the first time, you notice a smell of glue. Why?
  A: The smell is due to the PVC material used in the bubble house, and it should dissipate over time.

• Q: What should I do if I notice wrinkles on the bubble house?
  A: The wrinkles are normal due to packaging; you can place the bubble house in sunlight to help reduce them.

Hi, thank you for purchasing the Bubble House. Please read this instruction sheet carefully and keep it in a safe place for future reference. If you need assistance, please contact customer support by email. For your safety and continued enjoyment of this product, please read the instruction book carefully before using.

PRECAUTIONS

ELECTRICALLY OPERATED PRODUCT: PRECAUTION SHOULD BE OBSERVED DURING PRODUCT USE AND TRANSPORT TO PREVENT ELECTRIC SHOCK.

KEEP THE INSTALLATION INSTRUCTION FOR FURTHER REFERENCE. PLEASE READ ALL THE SAFETY RULES BEFORE SETTING UP. WE BELIEVE IN SAFETY FIRST. PLEASE FOLLOW ALL OF THE RULES FOR YOUR CHILDREN’S SAFETY.

• Do not enter the product until it is fully inflated
• Please make sure the product is fully fixed before using
• During the game, the blower needs to be kept on, and do not let the sundries cover the blower
• Do not play with the product while eating, drinking or chewing any food or item
• Pregnant women, infants and people with head, neck, back or other muscle or bone injuries or disabilities should not play this product
• Please install and disassemble by adults, and adults need be around to supervise during the kids play
• Please clear the space about two meters around the product, and there should be no buildings, obstacles or sundries.
• Do not use the product in windy and rainy
• The installation location should be away from any fire source and inclined surface
• Do not install or drag the product on concrete pavement or other rough surfaces
• Keep the product fully inflated until everyone leaves the product
• Shoes, helmets, hats, glasses, jewelry and any hard or sharp objects cannot be brought into the bubble house
• Please read the product play age and number limit table carefully to avoid damage to the product.
• The blower should be kept away from water and mist. If the blower comes into contact with water, unplug the power cord and do not use the blower until it is dry

PRODUCT PLAY AGE AND NUMBER LIMIT

PRODUCT PARTS

The products contain:

• Bubble House
• 500W Pump
• 750W Blower
• Repair Patches
• Valve Wrench
• Wax for lubricating zips

PRODUCT SPECIFICATIONS

Questions for first use

1. When you use the bubble house for the first time, you notice a smell of glue. Because the bubble house is made of PVC material, it will smell bad when it is first used.
2. Use the bubble house to find that there are wrinkles. Because the material of the bubble house is thick, there will be wrinkles after being compressed and packed. It is recommended that placing the bubble house in the sun to inflate it. Under photosynthesis, the wrinkles will be lightened by the sunlight.

SET-UP

1. Fully expand the product on a place free of sharp objects
2. Find the valve and start inflating with air pump
3. Tighten the Valve when finished
4. Make sure the zipper on the bottom of the bubble is closed
5. Find the air tube, connect the air tube to the air blower and start inflating
6. Inflated complete, keep the air blower running when using it

TAKE DOWN

Make sure the product is free from sharp objects. If there are some stains, please clean them with bubble water in time. Make sure everyone exit the product.

1. Turn off the air blower, untie the fixed D-ring, and wait for the air in the product to be emptied.
2. Fold the product in half twice to fold to the smallest size.
3. Roll up the product starting from the opposite side of the inflation tube and use your body weight to remove the air inside the product.
4. Store the product in a storage bag and store it in a cool, dry place.

Common Problems

turning off the air blower, use the binding

rope to fasten the air blower

Whether the tunnel is leaked| Use a valve wrench to tighten thevalve
Whether the power cord is extended causing insufficient voltage| Please keep the power supply close to the Bubble House. It is forbidden to connect long wires without permission. Forbid dangerous use of electricity!
Whether the air blower damaged| Take a video of the power failure to contact customer service and explain the situation, and the manufacturer will make a diagnosis
Whether the air blower inflated slowly| Close the product air outlet zipper
Whether the air blower inflated too much| Open the product air outlet zipper and bend the fan duct a bit

Repair

If the product damaged, please repair it by hand. Each type of product comes with a patches.

Customer Service

Check out Our website: www.airfungo.com
Never store an Bubble House while the device is still wet. Allow the products to dry completely before rolling up for storage. Regularly and thoroughly inspect bubble house for holes, tears, others.

References

• White bounce house for wedding/party/birthday/event – Airfungo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>