hama 00139919 Spot Pointer V2 Presenter Instruction Manual

: June 1, 2024
: Hama

Table of Contents

00139919 Spot Pointer V2 Presenter
Controls
Explanation of warning symbols and notes
Explanation of product marking symbols
Package contents
Safety instructions
Operation
Function types
Software functions
Care and Maintenance
Warranty Disclaimer
Technical data
Declaration of Conformity
Documents / Resources

00
139919
WirelessLaser Presenter
Spot-Pointer V2 Operating Instructions

00139919 Spot Pointer V2 Presenter

hama 00139919 Spot Pointer V2 Presenter - Figure 1

Controls

“Back” button,when the button is held: black screen
“Next” button,when the button is held: Play/Exit the PowerPoint
Button :Activation of hyperlinks -when the button is held: Size change
Double-click: change of the function types, see “6.Function types”.
Display: Timer display -Remaining presentation time
USB connection
Timer button:activate and displaythe preset timer -when the button is held: Timer display
Double-click: Start timer
On/Off switch
Storage compartment for receiver (dongle)
Micro-SD cardslot

Thank you for choosing aHamaproduct. Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for futurereference.Ifyou sellthe device, please pass theseoperating instructions on to the new owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Explanation of product marking symbols

| The power delivered by the charger must be between min 1.0 Watts required by the radio equipment, and max 1.0 Watts in order to achieve the maximum charging speed.
---|---
The standardised USB interface means that a charger with ahigher output power canalso be used.

Package contents

“Spot-Pointer V2” Wireless Digital Presenter
USB receiver
Micro-SD cardwith software
USB charging cable
Transport bag
These operating instructions

Safety instructions

The product is intended for private, non-commercial use only.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
As with allelectrical products, this device should be kept out of the reach of children.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits specified in the technical data.
Do not use the product in areas in which electronic products are not permitted.
Do not open the device or continue to operate it if it becomes damaged.
The battery is permanently installed and cannot be removed; dispose of the product as awhole in accordance with the statutory regulations.
Keep the packagingmaterial out of thereach of children due to the risk of suffocation.
Dispose of packaging material immediatelyinaccordance with the locally applicable regulations.
Do not modify the product in any way.Doing so voids the warranty.
Do not incinerate the battery or the product.
Do not tamper with or damage/heat/disassemblethe batteries/ rechargeable batteries.
Use the product for its intended purpose only.
Protect the product from dirt, moistureand overheating, and only use it in adry environment.
Use the item only in moderate climatic conditions.
Do not attempt to service or repair the product yourself.Leave any and allservice work to qualified experts.

Operation

5.1 Charge the Spotlight Presenter
If the following symbol appears on the display: “ ”
the battery status is low.Connect the supplied USB charging cable to the USB-C port (5). Connect the free plug on the USB charging cable to asuitable USB charger.
A complete charging cycle takes about 2hours.
Warning –rechargeable battery

Only use suitable charging devices or USB connections to charge the product.
Do not use defective chargers or USB ports and do not attempt to repair them.
Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
Charge regularly (at least quarterly) during periods of prolonged storage.
Do not overcharge the product or allow the battery to completely discharge.

5.2 Quick start

Plug the receiver into an available USB port on your device.
After automatic driver installation, the removable data medium opens
Install the required Spot-Pointer software
Switch the Presenter on following successful installation (7).
The following symbol now appears in the task bar:

Note
If the Presenter is switched off,orifthe receiver is not connected to the computer,this willbeindicated by acolourless symbol.

Function types

Spot illumination mode
Magnifying glass function
Digital laser pointer

Pressing the obutton (3) twice allows you to toggle between the function types
By pressing and holdingthe obutton (3), youcan change the size of the laser pointer,spot and magnifying glass with the two function keys (1) and(2)

Software functions

hama 00139919 Spot Pointer V2 Presenter - Software
functions

Selection to set the function type
Individual setting of the background shading when spot illumination modeisactive
Setting of the background transparency when spot illumination mode is active
Individual setting of the colour of the digital pointer
Setting of the transparency of the digital pointer
Setting of the size of the modes used
Setting of the magnifying glass’s zoom function
Timer: Beforethe meeting, set atime for the vibrationalarm (maximum alarm time: 199 minutes). The display allows you to keep an eye on thepresentation time.
TACTILE FEEDBACK
Receive asilent alarm when usingthe timerand when the battery level is low.
Software-language selection

Care and Maintenance

Clean this product only using alint-free, slightly damp cloth and do not use any harsh cleaners. Take care to ensurethat no water enters the product.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.

Technical data

Connection	Wireless, 2.4 GHz connection
Function range	<20m*
Battery	Li-Ion 3.7V 250mAh /0.925Wh Battery Use Time (rechargeable): 3months*
Connection	USB-C as acharging function
Power supply	5V ****240mA
Size	130 x22x35mm
Weight	approx. 40g
System requirements	Windows 10 /8/7 Mac OS X10orhigher Restricted

functionality (no software): Chrome OS™, Linux®, Android™

*Depending on the conditions of use

Declaration of Conformity

** Hereby,Hama GmbH &CoKGdeclares that the radio equipment type [00139919] is in compliance with Directive 2014/53/EU. The fulltext of the EU declaration of conformity is available at the following internet address: https://uk.hama.com 00139919** Downloads

Frequency band(s)	2402 –2480 MHz
Maximum radio-frequency power transmitted	-1.8 dBm e.i.r.p.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+499091 502-0 www.hama.com/nep
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
00139919/03.24

Documents / Resources

| hama 00139919 Spot Pointer V2 Presenter [pdf] Instruction Manual
00139919 Spot Pointer V2 Presenter, 00139919, Spot Pointer V2 Presenter, Pointer V2 Presenter, V2 Presenter, Presenter
---|---