TPyesss Bluetooth Speakers User Manual
- June 2, 2024
- Tpyesss
Table of Contents
TPyesss Bluetooth Speakers
Specifications
- Speaker type: Portable Wireless Speaker
- Item Weight: 7.2lb
- Exterior design: Cuboid
- Item Color: Black
- Light Type: RGB/LED
- Charging Cable: USB Type-C
- Active/Passive: Active
- Control Method: Knobs and Buttons
- Product Dimensions: 10.967.9 inches
- Soundtrack System: 1.0
Matters Needing Attention
To use the player correctly and ensure that performs well, please read and observe:
- Do not hit the host severely.
- Do not touch benzene, thinners, and other chemicals. Please keep away from strong magnetic and electric fields.
- Please avoid direct light or heating appliances.
- Do not disassemble, repair, or modify by yourself.
- Please sort and properly dispose of waste packaging, batteries, and old electronics.
- Do not expose the product to rain or damp rings to prevent fire or electric shock.
Precautions for the Charging
- Insert one end of the power cord into the [5V] socket of the machine, and insert the other end of the USB into a matching plug or computer. The “red light” is on when charging, and it goes out when it is fully charged.
- It is recommended that the product try not to play while charging, so as not to charge for a long time and shorten the battery life.
- Do not put water containers next to the charger, so as to avoid water splashing and causing a short circuit of the charger, resulting in overheating, leakage and malfunction.
- Do not put heavy objects on the power cord or try to modify the power cord, otherwise it may cause electric shock or fire.
- When charging, please use a charger not exceeding 5V/2A, otherwise, it may shorten the battery life or damage the machine.
- The speaker has a built-in charging protection circuit, which can be connected to a computer or charger for a long time, about 3-4 hours fully charged. Usually, the battery life is between 16-18 hours, the duration will vary depending on the time of LED light usage and volume playback level.
- When the battery power is low, the system will automatically shut down. Please charge in time. If you do not use the machine for a long time, please charge it at least once a month to protect the battery and prolong its life.
Speaker Connection
- Wireless speaker connection:
- Turn on the speaker device, turn on the wireless connection function of the mobile phone, and search for the wireless device “BA-02”. (No need to enter a password, connect directly).
- TWS connection:
- When the new machine is dual-connected for the first time, you need to long-press the TWS button(∞ logo) for both machines, when you hear “TWS cleared”, it means pairing is in progress. When the pairing is successful, you will hear “TWS paired”. (under normal circumstances, the pairing is successful within 6 seconds, but the greater the environmental interference, the longer the pairing time)
- If the two devices have been connected, turned off, and on again, the machine will automatically interconnect, no need to re-connect.
- TWS is disconnected or reconnected, the host needs to be operated (the host means: the one that can be controlled by Bluetooth is the host, and the one that needs to be paired is the slave).
- Other connections :
- The machine automatically detects and recognizes the external device when it is turned on and enters the wireless connection AUX mode after it is turned on. The TF card or USB is inserted and automatically recognizes the playback. The latter has the priority principle and the playback mode can also be switched by itself; the audio signal line does not switch automatically through [M] Key to switch to play in AUX mode.
Jack Description
-
MIC
Microphone Interface 03.5 -
DC 5V
Power Port -
TF
TF Card Port -
AUX
3.5mm Auxiliary Audio -
USB
USB Type-A Port -
ON/OFF
Speaker On/Off Switch
Basic Paramete
Speaker type
| Portable Wireless Speaker| ****
Item Weight
| ****
7.2lb
---|---|---|---
Exterior
design
| ****
Cuboid
| ****
Item Color
| ****
Black
Light Type| RGB/LED| Charging Cable| USB Type-C
Acve/Passive
| ****
Active
| Product Dimensions| 10.967.9
inches
Control
Method
| Knobs and Buttons| Soundtrack System| ****
1.0
Features
| Wireless Connection Electronic Devices, Support TF Card, AUX,USB, MP3 Music Playback
Technical Parameter
Frequency Response| ****
45Hz-20KHz
| Signal-to-Noise
Ratio
| ≧100db
---|---|---|---
Output Power| 80W (Peak)| Impedance| 4Ω
Speaker Unit
| 4 inches*2
3 inches*2
| ****
Distortion
| ****
1%
Transmission Distance| ****
33 Foot
| Play Time (50%volume)| ****
16-18h
Power Supply
| DC5V/2A Lithium Battery| LED Light Play
Time
| ****
12-14h
Battery
Capacity
| ****
5000mAh /7.4v
| ****
Charging Time
| ****
5-6h
Audio Interface| 3.5mm AUX| Connection
Version
| 5.0
Package List
- 1 x Wireless Portable Speaker
- 1 x AUX 3.5mm Audio cable
- 1 x USB Type-C cable
- 1 x User manual
After-Sales Service
- We promise that if the product has quality problems, it will be returned for half a year, guaranteed for one year, and free consultation for life. Welcome your consultation.
- If you are satisfied with our service, please comment on our service. Thank you for your participation and recognition. This will be our greatest motivation.
- If the product or service you are not satisfied, don’t hesitate to get in touch with us in time so that we can know the specific problem you encounter and provide you with a better solution.
- We are happy to help you answer any questions about the product.
- Welcome to us and scan the QR code for consultation. of course, you can also come to our official website to browse, we will provide friendly support.
- We and other buyers need your sincere advice on our products, If time permits, please share your thoughts. We will prepare some surprises for you as well.
Thanks again!
Enterprise Mailbox:
btspeakerservice@gmail.com
Questions and Answers
key to switch AUX mode. 3.Whether the volume of the external audio source device is turned on.” image-3=”” headline-4=”p” question-4=”Q: Why doesn’t the product establish a Bluetooth connection automatically?” answer-4=”A: 1. The automatic connection only occurs with the previously paired devices. 2.If the stereo is turned on and no Bluetooth device is detected within 10 seconds (e.g. the Bluetooth mode is not activated on a smartphone), it won’t establish an automatic connection.” image-4=”” headline-5=”p” question-5=”Q: What are the possible causes for the lack of sound in Bluetooth mode?” answer-5=”A: 1. Firstly, ensure that the wireless Bluetooth connection has been successfully established. 2. Secondly, make sure to simultaneously activate the volume on both the Bluetooth device and the speaker.” image-5=”” count=”6″ html=”true” css_class=””]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>