Tuya F5 Pro-TY Smart Lock User Manual

Tuya F5 Pro-TY Smart Lock

Features

ATTENTION:

• The lock comes with “English” voice as standard, and you can switch to another language by the following operations
• keep the lock under factory default without any users registered
• Activate the keypad and input the code for other languages of the voice
• 333666991#-English
• 333666992#-Arabic
• 333666993#-Russian
• 333666994#-Portuguese
• 333666995#-Thai
• 333666996#-Spanish
• 333666997#-Vietnamese
• 333666998#-Indonesian

Accessories

Product Overview

Specification

invalid after you reset the administrator.
Lock type| 2085/2585/2885/3585/4585/5085/6085/7085/3592/5572/6072
Virtual password| Available
Number of users| IC card+ password+ fingerprint: 300 groups, 9 groups of administrators

Installation guide

Door opening direction selection

1. Right handle opening
2. Left handle opening

Adjust the Right Handle and Left Handle

1. Adjust the front panel handles left or right
2. Adjust the back panel handles left or right

Open to the right:

Open to the left:

Door thick accessories selection

• Applicable door thickness 35-70mm, beyond the range of doors require special customization.
• After determining the thickness of your door, select the appropriate accessories in the corresponding door thickness section

Double deadbolt mortise lock internal and external conversion

The sliding door can be equipped with a double hook mortise lock

Precautions before installation

1. Do not use too much force during installation to avoid damaging the door lock.
2. Wear glasses when drilling to protect your eyes.
3. Use the correct installation tools.
4. Drill holes on both sides of the door to avoid damaging the door panel.

Information and Safety Warnings

• introduce
• This user manual will introduce the functions and usage of this smart lock. You must follow the instructions and note all comments that appear in this manual.
• Please refer to this manual before attempting to use this lock. If you have any questions not answered in this manual or require unconventional service, please call our customer service line or send us a FAQ.

Safety warning:

• When reading this manual, pay attention to the following notes. notes must be read and followed to prevent injury or damage to the lock.

Common usage:

• This lock can only be used in the manner described in this manual.
• All parts of the inspection lock are included. If any parts are missing, please contact our service staff.
• There is a protective film on the front touch screen. If there is a scratch on the protective film, please remove the protective film when necessary.
• Please use 4 AA batteries. Do not mix old and new batteries or other zinc-manganese batteries. As described in this manual, do not leave batteries outside items are inserted into the lock.
• Before starting installation, please ensure that all surfaces are flat, mounted on the door, or have any type of defects such as gaps or warping, The lock may fail or become completely inoperable.
• Do not apply any detergent directly to any part of the lock. When cleaning, only use clean water or mild cleaner in a soft non – grind clean on the cloth.
• Locks must be used with the Tuya APP. The lock works without an APP, but only when using an app can realize the complete function.

Terms of Sale and Service

• Please read the instructions carefully before use!
• 1-year electronic warranty.
• This product comes with a 1-year limited warranty on electronic parts. Limited warranty on mechanical and surface quality against defects in materials and workmanship under normal use.
• Proof of purchase and ownership is required for the warranty to take effect.
• Please feel free to contact us for any errors or problems in our manual or after-sale terms.,
• We are not responsible for compensation or free maintenance for damage caused by human factors or unavoidable causes. Please check our after-sales service terms.
• Non-technical personnel do not remove the lock at will. If necessary, please operate under the guidance of technical personnel.
• Note: The product picture may be slightly different from the actual product, please refer to the actual product.
• After replacing the battery, please do not discard it at will. Please return the battery to the recycling station to avoid environmental pollution!

Installation steps

1. Install mortise lock
2. Install the front panel
3. Install the back panel
4. Install batteries
5. Install Strike plate
6. Test the lock and unlock it with a mechanical key
   • After installation, please test with code 123456, turn the manual key, and press the handle to open.

The menu structure is shown in the figure

Precautions before operating the smart lock

1. Unlock the privacy switch settings
   • By   default: The default administrator password is 123456. You must change this password to set up the network.
   • You cannot set the smart lock through the Tuya APP under the default password 123456 in the factory state, and the electronic lock button is also unlocked!
   • There is a privacy button on the back panel. You can pull up the button with the “lock” sound. Then locked inside, only the administrator can open the door the user password or IC card will be invalid.
   • You can pull the button down again, accompanied by the sound “Unlock” to cancel this feature.
   • Note: Push the button up to lock the state, and push the button down to unlock the state.
2. Other precautions
3. The administrator can be a password/fingerprint or IC card, which you can set according to your requirements. There are 9 administrators in total.
4. Press the # key to confirm and press * to return to the previous step. If there is no operation within 10 seconds, the lock will exit the setting.
5. After 5 incorrect unlocks, the keyboard will be locked for 30 seconds, during which time no operation will respond.
6. If you enter the wrong password for more than 5 consecutive times, the keyboard will be locked for 30 seconds. The system will not respond to any operation within 30 seconds.
7. Password anti-snooping function: enter the password as follows when opening the door: XXX password XXX; You can add some irrelevant codes before and after the password and press # to confirm. The password must be included in the input.
8. When the voltage is lower than 4.8V, it will automatically alarm every time you open the lock, and be sure to replace the new battery as soon as possible.
9. Hold down the “SET” key on the rear panel for 6 seconds (turn on indicator 654321 at the same time) to restore the system to factory defaults. The initial management password is 123456.
10. After unlocking, enter “5” + successively, and the lock will enter the normal opening mode (this setting is valid for this time. Enter the unlocking information again and then close the lock.
11. After unlocking, press “*” to play the current unlocking information number.
12. After opening the electronic locking function, only the administrator can open the lock; Privacy features.

Smart lock operation

1. Function key Description
2. Administrator information: refers to the fingerprint, password, or IC card of the administrator.
3. Unlocking information: refers to the input fingerprint password or IC card information (including administrators and ordinary users).
4. key: For the Clear key or Back key, tap Clear the previous input when entering the password, and tap three times to clear the input.
5. key: confirm key or menu function key.
6. Initialization Settings
   • Please note: Before you can start using this lock, you must register a new administrator. If not, you cannot configure a Wi-Fi-enabled lock.
   • The procedure is as follows:
7. Add the administrator password
8. Delete the administrator password
9. Add user password
10. Delete the user password
11. Add user IC card
12. Delete the IC card information
13. Add user fingerprint information
14. Delete the user’s fingerprint
15. System setting
    • Note: You can follow the sound prompt to unlock type/language/lock time and other Settings, these features are designed for some special cases
16. Restore factory Settings

Network operation

1. APP configuration (optional Tuya Smart WIFI, currently only 2.4G WIFI band is supported)
2. Add an administrator (if added, skip it);
3. Search “Tuya Smart” in the App Store or APP store to download the app and install it.
4. Register and log in with your mobile number.
5. Press the “TuYA Smart” interface to find the security sensor, record “Door lock Wi-Fi”, and click to complete the device addition and use as prompted.
6. Add a network:

  * a Press * + to verify the administrator, press 1 to enter the administrator settings, and press 3 to configure the network for voice broadcast networking settings
  *  **b**. Voice announcement: Press “1” for WIFiconnection (the indicator at the top of the screen is slow) Press “2” for intelligent connection (the indicator at the top of the screen is fast blinking):
  *  **c**. When the addition is successful, the 1234 keyboard light on the keyboard will be turned on successively and the voice will announce: “Operation succeeded”; Voice broadcast “Add failed” after timeout;
6. Remote unlocking: wake up the screen and press after the voice prompt: remote unlocking request:
7. The lock time will be corrected when unlocking remotely.

Tuya APP operation

1. Download Tuya APP
   • The Los version can be downloaded from the app store, and the Android version can be downloaded from Google Play, App Store, Baidu Ali, 360, Huawei, Xiaomi, and other app markets.
2. Open the Tuya APP on your mobile phone
3. Registering an account
   • Enter the Tuya APP and click “Register” in the upper right corner to enter the interface of account and registration.
   • You can register an account by mobile phone or email. You can choose either way.
4. Login account
   • After login>>enter the account>>Enter the login password of the account.
5. Adding devices
   • Step 1: Wake up operation smart lock, press “1” + Start Network >> Network Configuration (LAN Heng); 51-2: Add devices – security monitoring — “Door lock
6. Connect WIFI
   • Enter the password of the connected WIFI and click next.
7. Perform the following steps: Go to the next step
8. Select Wi-Fi Fast connection Wait for the connection
9. The distribution network is successful, enter the home door lock PRO
10. Press the doorbell to unlock remotely
    • Remote unlocking is triggered by locking the doorbell, the guest requeststhe owner unlock, as shown below: smart door lock–remote request–unlock
11. User list
    • Click the door opening record to view the remote information, the alarm message interface displays the image of the customer who pressed the doorbell remotely, and the operation log interface displays the unlocking information, as shown below:

To connect to the Internet, must purchase the version with the Tuya WiFi function Scan the QR code below to download the APP

• Search on the mobile app market or the Apple Store Tuya Smart” or “Smart Life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>