behringer CHROMATIC TUNER TU300 Ultimate Guitar Bass Tuner User Manual
- June 2, 2024
- Behringer
Table of Contents
Behringer CHROMATIC TUNER TU300 Ultimate Guitar Bass Tuner
Safety Instruction
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install under the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/ accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and you national law.
- This product should be taken to a collection centre licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
- Do not install in a confined space, such as a bookcase or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights reserved.
Thank you for showing your confidence in us by purchasing the Behringer CHROMATIC TUNER TU300. This compact guitar and bass tuner provides 7 different tuning modes. Thanks to its 7-segment LED display and 11-point LED indicators, it provides great visibility, especially in dark environments.
Controls
- The ON/BATT LED illuminates when the tuner is activated. It also serves as a battery level indicator.
- This LED meter indicates to what degree the instrument’s tone deviates from the reference tone.
- These yellow arrow LEDs light up when the played note is below or above the pitch. Both LEDs will light up when the tone’s pitch is correct.
- The 7-segment LED display indicates the string number (high E string: “1”, B string: “2” etc.) of the strummed string of your instrument if the TU300 is operated in one of the guitar or bass modes. In chromatic mode, it displays the note name. Semitones are shown by the decimal point LED (“#”) in the display.
- Press the STREAM/CENT button to switch between the LED display modes.
- Press the MODE button to select the tuning mode.
- Use the footswitch to activate/deactivate the tuner.
- Connect your guitar or bass to the ¼” TS IN connector.
- Connect your amp or another stompbox to the ¼” TS OUT connector. When the tuner is activated (footswitch pressed) the output is muted. This way, you can silently tune your guitar or bass.
- The ¼” TS BYPASS connector always sends a signal to your amp independently of the footswitch position. Use the DC IN connection at the right side of the unit to plug in a 9-V power supply (not included).
- The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit. and remove the pedal cover. Be careful not to scratch the unit.
- The TU300 is powered as soon as you insert a plug into the INPUT. The battery is “disconnected” when the plug is removed. For this reason, the TU300 has no on/off switch.
- To extend battery life, always disconnect the input when the unit is not in use.
- The SERIAL NUMBER is located at the bottom.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service the product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when the
power supply cord or plug is damaged.
Limited Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/support. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING
- As with all small batteries, the batteries used with this product should be kept away from small children who still put things in their mouths. If they are swallowed, promptly call your local poison control centre.
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device before battery installation.
- Ensure the batteries are installed correctly about polarity (+ and -).
- Always remove the battery if consumed or if the product is to be left unused for a long time.
- Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type!
- Risk of fire or explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting off a battery, which can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal.
Specifications
In
Connector 1/4″ TS
Impedance 500 kΩ
Out
Connector 1/4″ TS
Impedance 1 kΩ
Bypass
Connector 1/4″ TS
Impedance 1 kΩ
Power Supply
- 9 V, 100 mA regulated
- Behringer PSU-SB
- USA/Canada 120 V~, 60 Hz
- China/Korea 220 V~, 50 Hz
- U.K./Australia 240 V~, 50 Hz
- Europe 230 V~, 50 Hz
- Japan 100 V~, 50 – 60 Hz
- Power connector 2 mm DC jack, negative centre
- Battery 9 V type 6LR61
- Power consumption 70 mA
Physical/Weight
- Dimensions approx. 2 1/8 x 2 3/4 x 4 4/5″
- (H x W x D) approx. 54 x 70 x 123 mm
- Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without priornotice. Specifications and appearance may therefore differ from those listed or shown.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe
Commercial NV Inc.
Address: 122 E. 42nd St.1,
8th Floor NY,
NY 10168,
United States
Email Address: legal@musictribe.com
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product complies with Directive
2014/30/EU
Directive 2011/65/EU and Amendment 2015/863/EU
Directive 2012/19/EU, Regulation 519/2012
REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K,
Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London
EC4A 4AB, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>