TecTecTec ULTX-800 Golf Rangefinder Laser Range Finder User Manual

TecTecTec ULTX-800 Golf Rangefinder Laser Range Finder

RANGEFINDER USER MANUAL
Accuracy Is Everything.

08-18 us.tectectec.com

• VISIT us us.tectectec.com
• CONTACT US us@tectectec.com
• LIKE us facebook.com/tectectecus
• FOLLOW US instagram.com/tectectecusa
• JUST OKAY IS NOT ACCEPTABLE.
• We want you to be happy!
• Call us ot 833-383-2669
• Monday to Friday (8 AM to 2 PM – ET)
• contact us ot us@tectectec.com

REGISTER YOUR WARRANTY NOW

• It’s FREE!
• It takes just 30 seconds to register and extend your warranty*
• us.tectectec.com/warranty
• Every month, one customer is selected to win a FREE rangefinder.
• THANKYOU
• Congratulations and thank you for choosing the TecTecTec!® ULT-X laser rangefinder. If you have any problems with our product, please contact us at us@tectectec.com. You will need your order ID number.
• You can write it here to remember it for future use.
• My ID number
• All quality-related issues are eligible for reimbursed return and replacement. Customers must have purchased the item from an on line retailer or be in possession of proof of purchase in order to initiate an exchange.

What’s Included

• Laser Rangefinder x1
• Microfiber Cloth x1
• Pouch x1
• Wrist Strap x1
• CR2 Battery x1
• Manual x1

Getting Started

1. Locate the battery compartment on the bottom of the unit and turn the cover to open.
2. Insert the CR2 battery so that the negative end is placed against the spring.

If the unit does not turn on, open the battery compartment and inspect the battery contacts to be sure that they are not broken, crooked, or blocked.

1. Loop the wrist strap through the slot located near the battery compartment.

Turn the Rangefinder on and off

• Turn On
  • Press the power button to turn the unit on.
• Turn Off
  • Leave the unit unattended for 30 seconds allowing it to turn off automatically.
  • Change the Unit of Measurement 
• Press and hold the mode button for 3 seconds to alternate from meters to yards and vice versa.
• Pressing the button briefly will change the mode.

Hold the Rangefinder

1. Look through the rubber eyepiece.
2. Both buttons should be facing the sky as you use the rangefinder.

Adjust the Eyepiece

1. Look through the eyepiece.
2. Turn the eyepiece/diopter to the left or right until the image is clear.

Tournament Legal

• Ml: Normal Mode, Scan Mode

• M2: Pin Mode

• Slope Ready

• Simply pull the faceplate into position to begin.

• M 1 : Normal Mode, Scan Mode

• M2: Pin Mode

• M3 : Pin Slope Mode

 Using the Modes

M1: Normal Mode

1. Aim at a single target.
2. Press the power button once briefly.
3. The distance to the target is shown.

When to use it Targets are fairly close or shots are straightforward.

M 1 : Scan Mode

1. Pan over the terrain while continuing to hold the power button.
2. While holding the power button, pause when the cross hairs are over a desired target and continue to hold the power button down as you pan to the next target.
   The rangefinder will show the distance to one element after another as you pause over them.

When to use it Examining terrain and planning difficult shots

Press the MODE BUTTON to Switch to Pin Mode
M2 : Pin Mode + Vibration Alert

1. Aim to the left or right of your target and then press and hold the power button.
2. Release the button just after the cross hairs have passed over the target.
   Rangefinder will lock the closest distance measured. (In this case the flag) The rangefinder will vibrate  when it “locks” the target.

When to use it The flagstick is surrounded by background objects.

M3 : PinSlope Mode+ Vibration Alert
(Only with Slope Ready faceplate pulled into position)

1. Aim to the left or right of your target and then press and hold the power button.
2. Release the button just after the cross hairs have passed over the target.
   Readings taken will show both the actual distance and the elevation adjusted “play like” distance. The rangefinder will vibrate when it “locks” the target.
   When to use it

Playing courses with a great deal of elevation change.

 LCD Display

Slope Mode Diagram

The rangefinder will calculate the elevation adjusted distance to the target. It will show both the actual distance and the elevation adjusted 11play like” distance .

 Measurement Failure

If the rangefinder shows —• – ,this indicates that the laser is firing normally but the unit is unable to locate the target.

1. Be sure the distance is within the measurement range. Not closer than SY, and not above the maximum range of your rangefinder.
2. Be sure there is nothing between you and the target. (Ex. Windshield, glass, etc.)
3.  Please try cleaning all lenses with a soft cloth. Using Pin Mode will also increase the likelihood of an accurate reading even in difficult conditions.

Specifications

• Range S.5~1093Y (5-1000M)
• Accurate within +/- 0.3 yards or meters
• Fast and easy to use
• Waterproof* and dust resistant
• Transmits laser for up to 10 seconds
• Compact and lightweight
• Invisible laser
• Adjustable Eyepiece

Although the laser rangefinder is water and dust proof it should never be submerged in water.

 Cleaning

Remove dust or dirt on the lens surface using a soft or oil free cloth. Remove smudges or fingerprints by gently rubbing with a soft or high-quality, oil- free tissue. You can use photographic type lens cleaner or isopropyl alcohol to wipe the lens. Always apply the fluid to the cleaning cloth first (DO NOT pour on the lens).
Always store the rangefinder at room temperature and never keep it in a very hot or very cold car. When putting away the rangefinder for the off-season, always remember to first remove the battery.

SAFETY PRECAUTIONS

Read the instruction manual in its entirety before using this laser rangefinder. Please adhere to the following guidelines in order to use the equipment properly
and avoid injury.

• DO NOT aim directly at the sun
• DO NOT power on the unit while looking into the objective lens or the light-receiving aperture
• DO NOT operate the laser rangefinder with additional optical elements
• DO NOT disassemble the laser rangefinder as this will void the warranty
• DO NOT aim at the eyes of other people or animals
• Keep the laser rangefinder away from children
• Should the rangefinder come in contact with sand, mud, or any type of liquid this should be removed immediately using a dry, soft cloth
• Although the laser rangefinder is water and dust resistant, it is not waterproof and should not be used in water
• Do not place the laser rangefinder on any unstable surface as a fall may damage it

 Troubleshooting

NO DISPLAY

1. Reinsert the battery
2. Be sure the polarity(+/-) of the battery is correct
3.  Clean the battery contacts
4. Make sure the battery is not drained
5. Be sure the contacts are not blocked or crooked
6. Press the power button firmly

CAN NOT MEASURE

1. Be sure the device is powered on
2. Be sure that nothing is blocking either of the lenses
3. Make sure you are not trying to measure beyond the maximum measuring distance
4.  You should be pressing the power button only briefly in normal mode

FADING

1. Be sure that the unit and the case are completely dry
2.  Place it under direct sunlight for 3-4 hours

DO NOT take measurements while aiming through glass (e.g. windows, golf cart windshields, etc.)

• JUST OKAY IS NOT ACCEPTABLE We want you to be happy!
• Coll us ot 833-383-2669
• Monday to Friday (8 AM to 2 PM – ET)
• contact us ot us@tectectec.com

us.tectectec.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>