SONOFF M5-80 Switch Man Smart Wall Switch User Guide
- June 2, 2024
- SonOFF
Table of Contents
SONOFF M5-80 Switch Man Smart Wall Switch
Power off
Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!
Wiring instruction
Protective cover
When the wall-mounting box is made of plastic and the size is small, the protective cover can be omitted .
Make sure all wires are connected correctly.
Download the eWelink App
|Power on
After powering on, the device will enter the Pairing Mode during the first
use.
The Wi-Fi LED indicator changes in a cycle of two short and one long flash and
release.
The device will exit the Pairing Mode if not paired within 10mins. If you want to enter this mode, please long press any pairing button for about SSD until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
Matter QR code
Add device
Method 1: Matter Pairing
Open a Matter-compatible App ( e.g. Alexa App, Apple Home App, or Google Home App, etc) to scan the Matter QR code on the Quick Guide or the device itself to add the device.
Method 2: Scan QR Code to Add Device
Open the eWelink App and scan the QR code on the device, then follow the instructions given by the app to proceed .
Note: If the page doesn’t display after scanning the code, please power on the device and then click the’+’ button in the top right corner of the eWelink App homepage. Select ‘Add Device’ to proceed.
User Manual
https://sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the detailed user manual and help.
| Box | Box | Manual | Bag | Bag |
|---|---|---|---|---|
| PAP 20 | PAP 21 | PAP 22 | CPE 7 | LDPE 4 |
| Carta | Carta | Carta | Plastic | Plastic |
WASTE SORTING
Check the provisions of your municipality. Separate the components and assign
them correctly.
SAR Warning
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the a111tenna and the body of the user.
To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Icebreaker with Integral Overcurrent protection(RCBO) with an electrical rating of 1 0A (1 C, 2C), 6A (3C) has been installed before the MS-1 C-80, MS- 2C-80, MS-3C-80, MS-1 C-86, MS-2C-86, MS-3C-86, MS-1 C-80W, MS-2C- 80W, MS-3C-80W, MS-1C-86W, MS-2C-86W, MS-3C-86W.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd declares that the radio equipment type MS-1 C-80, M5-2C-80, M5-3C-80, MS-1 C-86, M 5-2C-86, M5-3C-86, MS-1 C-80W, M5-2C-80W, M5-3C-80W, MS-1 C-86W, M5-2C-86W, M5-3C-86W.is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/complianee/
EU Operation frequency Range
Wi-Fi:
802.11 b/g/n20:2412-2472M Hz
802.11 n40:2422-2462MHz
BLE:2402-2480M Hz
EU RF Output Power:
Wi-Fi 2.4G<20dBm
BLE<1 0dBm
WEEE Warning
WEEE Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WE EEAs in directive 2012/19/EU)which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or loci authorities for more information about the location as well as terms and conditions of such collection points.
Customers Support
Shenzhen Son off Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bu long Rd, Shenzhen, Guangdong, China
ZIP code: 518000 Website: sonoff. tech
Service emaiI: support@itead.cc
MADE IN CHINA