Bisofice PeriPage Mini Printer Installation Guide

Bisofice PeriPage Mini Printer

Product Sketch

1. Paper change button
   Press the buttons at the same time to open cover and exch­ange paper.

2. USB data cable
   Charged with power bank or mobile phone charger.

3. POWER BUTTON
   Press and hold 2 seconds to turn on/off.
   Double click to print device connection QR code.
   Click to terminate printing.

Power Indicator Status

• Green light on: Normal use status/full charged.
• Red light on: Cover opened/No paper/Over-heat/Charging.
• Green light flashing: Paper suction mode, please install the folded paper.
• Red light flashing: Low battery, please charge in time.

Mobile App Printing

• Step 1: Press and hold the power button for 2 seconds to turn on the printer.

• Step 2: Search [Peri Pagel and download Peri Page App in the mobile app store.

• Step 3: Open the App, and search for the connected printer according to the prompts in the App.
  Or double click the power button to print the QR code, and scan the code with the App to connect to the printer. (Tips: Don’t connect printer in the mobile phone Bluetooth settings.)

• Step 4: Select and edit the content to be printed in the App, confirm and print.

App download: Search for [PeriPage] on Google Play or AppStore, or scan the following QR code to download APP.

Computer Printing

• Step 1: Press and hold the power button for 2 seconds to turn on the printer.
• Step 2: Connect the printer to computer with the original USB cable.
• Step 3: Visit the official website www.ileadtek.com to download and install printer driver.
• Step 4: When printing the required documents, select the printer to print.

Replace Paper

Folding paper installation guide

(Make sure there is no roll paper in the printer)

Paper Holder Installation/Removal

Tips:

Operating ambient: 5°C-40°C ambient temperature, 45%-90%RH.
(Non condensing state).

Caution!
This is a Class A product. It may cause radio interference in the living environment.
In this case, users may need to take actions against interference.

Charging Instructions

• SV = 2A inputrecommend to use mobile phone charger for charging.
• Recommend to charge the battery fully before using.
• Please charge it every 3 months if you don’t use it for a long time, to avoid the long time natural loss of lithium battery and can not be charged.

Clean The Printer Head

1. Please turn off the printer and open the printer cover and take out the paper.
2. Dip a cotton cloth or cotton swab with medical alcohol, and wipe gently along the center to the periphery of the printer head.
3. After cleaning the printer head, do not use the printer immediately. Please wait for 1 to 2 minutes, use the printer after the alcohol has completely evaporated.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>