Bisofice TON170 Film and Slide Scanner User Manual

Bisofice TON170 Film and Slide Scanner

Preface

• Thank you for purchasing this product ! Please read this user’s manual carefully before using this product.
• Please retain this manual for future reference.
• Please use this product correctly

Safety Precautions

• Do not disassemble this unit.
• Do not touch inner part of the scanner after dropping or other damage suffering.
• Do stop using it if there is any problem with the scanner, such as smoke or smell while using.
• Do not clean the scanner with alcohol, gasoline, diluent and other organic solvent.
• Do not use it in many dusts with the damp environment.
• Do not overload the USB connections on your computer to avoid poor working of the scanner for overloading.
• Please use films of standard size.
• Cleaning : Please make sure the scanner is clean before using so as to produce a clean image.
• To protect the machine and save energy, 30 minutes without continuous operation will automatically shut down in the state of power-on. Press the power button to turn again to normal use.

Check Package Contents

Please check your scanner package whether it contained as followed objects, if lack of any object, please contact with retailers whom you buy the product from.

Please stretch into clean from product side, when you use cleaning brush to clean backlight

Product Structure Diagram

1. Power On/Off
2. Backward/left-hand rotation
3. Forward/right-hand rotation
4. OK/Brightness EV/RGB
5. Scan

Slide and negative holder loading method Loading Negatives

• Hold up the negative toward the light. Face the right side of the negative to yourself.

• Take out negative holder out. Let the side with “open” logo face yourself, and let the side with ” < “logo face down. Open the negative holder, then place negative into recessed area in the holder. Close the negative holder and press the edges so that it locks in place.

• Insert the negative holder into the slot on the right side of the film scanner.

Loading Slides

• Hold up the slide toward the light. Face (we don’t provide white small holder)

• Take out slide holder out. Let the side with “open” logo face yourself, and let the side with ” < “logo face down. Open the slide holder, then place slides into recessed area in the holder.(films also could be loaded as a strip into the slide holder, forming drawer type as below picture) Close the slide holder and press the edges so that it locks in place.

• Insert the slide holder into the slot on the right side Of the film scanner as shown.

Operation Guided

Introduction of Menu

1. Film Type
2. Resolution
3. Capture
4. Playback
5. Format
6. USB MSDC
7. Language

Capture Picture

• Before scanning please make sure the inner backlight panel is clean.
  Note: You can use the provided brush to clean the screen.

• In main Menu mode press “OK/Enter” enter capture mode, you can press left button to mirror and press right button to flip the current picture. And you can press OK button to set Exposure. Then press Convert/Mode button again back to main menu.

  • Press right key, the image position be altered from up to down.
  • Press left key, the image position be altered from left to right.

  * Press ENTER to set exposure compensation

• In main Menu mode press “OK/Enter” enter capture mode, then press “Mode” then press “OK/Eneter” the picture would be captured.

Operation Guide
In main menu, press “, until , then press “OK/Enter” you can chose negative(110, 135, 126KPK), slide(110, 135, 126KPK, Super8), B&W(10. 135, 126KPK)

How to playback captured picture
In main menu, press, until ©, press “OK Enter” enter the picture auto-playback mode press again to stop auto playback and you can view captured pictures manually, you can press “”«>” to view; press “OK Enter” again enter picture editing mode, you can rotate: delete, exit, save, and Kome” back to main menu.

1. Exit the submenu edit mode, back
2. Deleting the current picture from memory card
3. Exit the submenu edit mode, back to scan

Setting Language
Under main menu mode, press, until , press “OK/Enter” to choose language, then press “<“«>” and “OK/Enter”, one of following 8 language can be set: English, French, German, Italian, Spanish, T-Chinese, S-Chinese. Japanese.

Resolution Choosing
Under main menu mode, press “< >”, until , press “OK Enter” to enter into Resolution Choosing Mode, you can choose 14M or 22M (interpolation)

Formatting
In the main menu, press “</>” to “ “, press “OK/Enter” button to enter.

Note: After using this function, all the information in the Micro SD card will be deleted, please note it !

Connect to computer
Under main menu mode, press “<‘””>”, until , press “OK/Enter”. After successful connecting to computer, you can view and edit capture picture. After that, you can find the machine’s memory on my computer, open it directly, and copy all the pictures out of it.

How to adjust EV and RGB

• Brightness EV and Color Difference RGB are automatically preset, so they generally do not need to be adjusted.
• If you don’t feel right and need to adjust, press the OK button and the EV-RGB adjustment screen will appear. Adjust the preview to your appropriate color difference and brightness.
  • EV: darker to the left and brighter to the right. Press OK when you are satisfied.
  • R : red, left is heavy, right is light, press OK when it’s right.
  • G: green, left is heavy, right is light, press OK when it’s right.
  • B : blue, left is heavy, right is light, press OK when appropriate.

How to link HD to TV or monitor

• Plug the mini HD connector of our HD cable into the machine, and then plug the HD connector of the other end into the HD input connector of the monitor or TV.
• After the scanner is powered on, the scanner’s screen can be synchronized to the TV or monitor

Product Specification

• Function Film scanner/USB MSDC

• Interface Type -c mini HD

• Image Sensor 14.0 Mega pixels (4416*3312) 1/2.33″ CMOS sensor

• Display Color 5″ LCD HD

• Exposure Control Automatic / Manual -2.0 EV ~ +2.0EV)

• White Balance Automatic

• Resolution 14.0 Mega pixels/ 22Mega pixels (interpolation)

• Film type
  

  • 135 Film(36*24mm),
  • 126KPK Film (27*27mm).
  • 110 Film (17*13mm),
  • Super8 Film (4.01*5.79mm).
  • Monochrome, Slide

• Picture Effects B&W,Slides, Negatives

• File format Picture: JPEG

• TV-OUT type NTSC/PAL

• Built in memory 16GB

• Power Supply DC 5V Adapter/ USB Port

• Language S-Chinese / T-Chinese / English / French /German / Italian / Spanish / Japanese

• Support system

  • Windows XP/vista/Windows7/8/
  • Mac10.7.3 and above

Declaration

Please note products specification is subject to improvement. Any changes of products will not make additional specify.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>