UNIT Electronics OFERTA-294 2 Cloner Remote Control 433 Mhz Instructions
- June 2, 2024
- UNIT Electronics
Table of Contents
UNIT Electronics OFERTA-294 2 Cloner Remote Control 433 Mhz
Product Information
- The chipset compatibility
- 2260(All the manufacturers)
- 2262(All the manufacturers)
- PT2264/2240/5326(All the manufacturers)
- SC5262, HT600/HT6P20B/HT6P20D/HT680/HT6207/HT6010/HT6012/HT6014, SMC918 Series, 527(All the manufacturers)
- 1527(All the manufacturers)
- 2240(All the manufacturers)
- HCS101/200/201(Parts of code)
- HCS300/301(Parts of code)
- Parts of single chip…..
- Copy Way
- Erase the code
- (Clear the history code from duplicator)
- Press buttons “A” and “B” at the same time until LED flashes 3 times
- Release button “B” and Keep pressing button “A”, then press button “B” 3 times LED flashes fast
- Release button “A”, finish code clearance
- Duplicating
- (Copy code from the original transmitter)
- Put the duplicator aside from the original transmitter, as close as possible.
- Press and hold button “A” of the original transmitter, then press and hold button “A” of the duplicator until you see the duplicator’s LED flash and keep lighting
- Release both buttons, finish the code copy, and copy the other button in the same way.
- Resume
- Press and hold buttons “C” and “D” for 3 seconds, the LED flashes, and all buttons return to the latest copy codes.
Specifications
| Function | Description |
|---|---|
| Button A | Press and hold to initiate copying code from the original |
transmitter.
Button B| Press in conjunction with button A to erase the code or to finalize
copying the code.
Button C| Press and hold with button D to resume to the latest copy codes.
Button D| Press and hold with button C to resume to the latest copy codes.
LED Light| Indicates the status of code copying or erasure.
FAQs
How can I clear the history code from the duplicator?
Press and hold buttons A and B until the LED flashes three times, then release button B while continuing to hold button A. Press button B three more times rapidly to clear the code.
How do I copy the code from the original transmitter?
Put the duplicator next to the original transmitter, press and hold button A on both devices until the LED on the duplicator flashes and remains lit, then release both buttons.
What should I do if I want to use the latest copied codes?
Press and hold buttons C and D for three seconds until the LED flashes. This will revert all buttons back to the most recently copied codes.
Is this duplicator compatible with all chipsets?
The duplicator is compatible with many chipsets, but for some like HCS101/200/201 and HCS300/301, it only works with parts of the code.
The chipset compatibility
- 2260(All the manufacturers)
- 2262(All the manufacturers)
- PT2264/2240/5326(All the manufacturers)
- SC5262, HT600/HT6P20B/
- HT6P20D/HT680/HT6207/
- HT6010/HT6012/HT6014,
- SMC918 Series,
- 527(All the manufacturers)
- 1527(All the manufacturers)
- 2240(All the manufacturers)
- HCS101/200/201(Parts of code)
- HCS300/301(Parts of code)
- Parts of single chip……
Duplicator Remote
Duplicator Remote User Manual Copy Way
- Erase the code
- (Clear the history code from duplicator)
- A. Press buttons” A “and” B” at the same time until the LED flashes 3 times
- B. Release button” B” and Keep pressing button” A”, then press button “B” 3 times LED flashes fast
- C. Release button* A” finish code clearance
- Duplicating
- (Copy code from the original transmitter)
- A. Put the duplicator aside of the original transmitter, as close as possible.
- B. Press and hold button” A” of the original transmitter, then press and hold the button “A” of the duplicator until you see the duplicator’s LED flash and keep lighting
- C. Release both buttons and finish the code copy. copy another button in the same way.
- Resume
- Press and hold buttons “C” and “D” for 3 seconds, the LED flashes, and all buttons retum back to the latest copy codes.