Rythflo RY-AC01 Bluetooth Headphones User Manual
- June 2, 2024
- rythflo
Table of Contents
Rythflo RY-AC01 Bluetooth Headphones
WHAT’S INCLUDED
PRODUCT DIAGRAM
- Earhook
- Touch-control Area
- Microphone
- Earphone Indicator
- Type-C Charging Port
- Charging Case Indicator
OPERATION
| Function | Operation |
|---|---|
| Power On | Tap and hold for 3s |
| Power Off | Tap and hold for 5s |
| Play/Pause | ap twice |
| Activate/Deactivate Voice Assistant | Tap three times |
| Answer/Hang up Call | Tap twice |
| Reject Call | Tap and hold for 2s when a call comes in |
| Volume Up | Tap the right earphone once |
| Volume Down | Tap the left earphone once |
| Previous Track | Tap and hold left earphone for 1.5s |
| Next Track | Tap and hold the right earphone for 1.5s |
| Reset | Tap and hold left and right earphones for 8s |
INDICATORS
| Status | Indicator | Display |
|---|---|---|
| Power On | Blue | Flashes once |
| Power Off | Red | Flashes once |
| Charging | Solid | |
| Low Battery | Flashes once every 5s | |
| Fully Charged | Off | |
| Pairing | Red & Blue | Flashing alternately |
| Reset | Flashing 3 times | |
| Charging Case Power | Red (30%) | On for 30s |
Orange (30%-70%)
Green( 70%)
SPECIFICATION
HOW TO CONNECT
- Step 1: Take out the earphones from the charging case into pairing mode, the earphone indicator flashes red and blue alternately.
- When powered on, RY-AC01 will automatically connect with the last paired device.
- The pairing state will exit if pairing lasts longer than 5mins or pairing fails.
- Step 2: Select “RY-AC01” from your Bluetooth list and connect, the earphones’ indicator turns off when connected.
HOW TO WEAR
RESET
- If the earphones automatically connect back to the previous device when you want to connect to another device:
- Step 1 Turn off earphones.
- Step 2: Tap and hold both earphones for Bs and into pairing mode.
HOW TO CHARGE
Charge Earphones:
- Put the earphones in the charging case.
- Low battery: Red light fashes every 5s
- Charging: Red light solid
- Fully charged: Light off
Charge Case:
- Charge the case by Type-C cable.
- 1 %-30%: Red light flashes
- 31%-70%: Orange light flashes
- 71 %-99%: Green light flashes
- Fully charged: Green light solid
MANUFACTURER
- Shenzhen Hanke Technology Co.,Ltd Room 601, No.1 Lane, Wuhe Community, Bantian Street, Longgang District, Shenzhen, Guangdong, China, 518000
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used under the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.
WARRANTY & SERVICE
- This product is covered with a Rythflo product and labor warranty for 12 months from the date of its original purchase.
- Any concerns please email us as soon as possible, Rythflo will help you within 24 hours.
- support@rythflo.com
Documents / Resources
|
Rythflo RY-AC01 Bluetooth
Headphones
[pdf] User Manual
RY-AC01 Bluetooth Headphones, RY-AC01, Bluetooth Headphones, Headphones
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>