rythflo RY-BS010 Portable Bluetooth Speaker User Manual
- June 9, 2024
- rythflo
Table of Contents
rythflo RY-BS010 Portable Bluetooth Speaker User Manual
What’s in the Box
Product Diagram
- Light Control
- Volume+/ Next Track
- Play/ Pause
- Volume – / Previous Track
- Power On / Off & Mode Switch
- Reset Port
- TF Card Port
- Aux Port
- Charging Port
- Charging Indicator
Button Control
Single button
Double button
Getting Started
Power on
Press and hold for 3s
The voice prompt of connection will be heard. (The default mode is Bluetooth
mode with no AUX cable and TF card access) The light will be multicolour
slowly changing once powered on.
Connect via Bluetooth
- Enable Bluetooth on your device and search for pairing.
- Select RY-BS□ l O on the Bluetooth list
- Once paired, you can see the connected status on your device and light will change.
Disconnect, reconnect and memory clear: see Button control
Connect via Aux cable
When Aux cable is inserted, the speaker will automatically switch to Aux mode
and voice prompt will be heard.
When using the Aux mode, control audio playback via the connected device.
Press to switch to other modes
Connect via TF card
When TF card is inserted, the speaker will automatically switch to TF mode and
voice prompt will be heard.
When using the TF mode, control audio playback via the speaker.
Press to switch to other modes
Note: The last inserted device takes precedence as the playback source (Aux & TF).
Light Mode
Charging Precautions
Specification
Warning
Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the speaker.
Do NOT use cleaning products that contain benzene, solvents or alcohol.
Do NOT expose the speaker to excessive heat or direct sunlight for prolonged
periods of time.
Do NOT store the device in a place with high humidify or dust.
Do NOT place heavy objects on top of the speaker.
Do NOT use the speaker near a microwave oven or wireless LAN products.
Trouble Shooting
FCC Compliance
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must withstand any interference received, including
interference that may cause undesired operation.
Manufacturer
Shenzhen Hanke Technology Co.,Ltd
Meipeng SKY311, No.3 Hebei Industrial Zone, Zhongxing Road,
Ma’antang Community, Bantian Street, Longgang District,
Shenzhen, Guangdong, China, 518000
Warranty & Service
This product is covered with Rythflo product and labor warranty for 12 months
from the date of its original purchase.
Please contact us if you have any
questions:support@rythflo.co
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>