hama 00205284 Down Scaling 4K HDMI Splitter Instruction Manual

hama 00205284 Down Scaling 4K HDMI Splitter

Product Information

• Specifications
  • Power supply: USB-C
  • Connections: 1 x HDMI in, 2 x HDMI out, 1 x USB-C (power supply)
  • HDMI Resolutions: 480p, 576p, 720p, 1080p, 4K@30Hz
  • Max. video bandwidth: 3.4 Gbps / 340 MHz per channel
  • Transfer: Bidirectional
  • Dimensions (L x W x H): 71.5 x 32 x 14.5 mm

Product Usage Instructions

• Controls and Displays
  • Power supply (USB-C)
  • HDMI in
  • Status LED
  • Scale/Reset (see Operation section)
  • HDMI out
• Connection
  • Connect the HDMI input source to the HDMI in the port of the splitter using an HDMI cable.
  • Connect the output devices (eg, flat TV, projector) to the HDMI out ports of the splitter using HDMI cables.
• Powering the Splitter
  • Use the USB-C power supply to power the splitter.
• Operation
  • To adjust settings or reset the splitter, use the Scale/Reset button as indicated.
• Signal Transmission
  • For optimal 4K signal transmission, ensure that the total length of connected cables does not exceed 6 meters. For longer distances, consider using active HDMI cables.
• Care and Maintenance
  • Clean the product using a lint-free, slightly damp cloth. Avoid using harsh cleaners.

FAQs

• Problem: No picture
  • Solution:
  • Check all cable connections
  • Ensure the correct output channel is selected on the device
  • Verify all devices are powered on
• Problem: No sound
  • Solution:
  • Check all device connections
  • Ensure all devices are powered on
• Warrants Disclaimer
  • Hama GmbH & Co KG assumes no liability for damage resulting from improper installation, improper product use, or failure to follow operating instructions and safety notes.

Operating instruction

Controls and displays

1. Power supply (USB-C)
2. HDMI in
3. Status LED
4. Scale/Reset (see 8. Operation)
5. HDMI out

4K HDMI splitter „downscaling“

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

• Warning This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
• Note This symbol is used to indicate additional information or important notes.

Package contents

• “Downscaling” 4K HDMI splitter
  • USB-C | USB-A cable
  • Operating instructions
  • 2x disposal slips (Triman/WEEE)

Safety Instructions

• The product is intended for private, noncommercial use only.
• Use the product only for the intended purpose.
• Protect the product from dirt, moisture, and overheating, and use it in dry rooms only.
• Children should be supervised to ensure that they do not play with the product.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately per the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product near heaters, other heat sources, or in direct sunlight.
• Only use the article under moderate climatic conditions.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not use the product in a damp environment and avoid splashing water.
• Route all cables so there is no risk of tripping.

Description

• The “downscaling” 4K HDMI splitter from Hama splits an HDMI signal evenly across monitors.
• The integrated downscaler scales a high-resolution input signal to the maximum resolution that is suitable for both monitors.

Functions

• Output: 2 x HDMI sockets
• Input: 1x HDMI plug
• USB-C socket for power
• Plug and Play installation (no software required)

Installation/connection of two HDMI playback devices

• Connect the HDMI plug to your HDMI source device (e.g. Blu-ray or set-top box).
• Now connect your two HDMI playback devices (e.g. flat TV and projector) or (e.g. flat TV and flat TV) via the HDMI cables (not included in the scope of delivery) to the HDMI sockets.
• Connect the USB cable to an available USB input on your TV or set-top box.
• Alternatively, use an external USB power supply unit to provide the power.
• Now switch the source and playback devices on.

Note

• For perfect 4K signal transmission, the total length of the cables should not exceed 6 meters.
• For longer signal paths, we recommend the use of active HDMI cables.

Operation

• During commissioning, the resolutions of the monitors are checked and the input signal is adjusted (scaled) accordingly. The button (4) retriggers the scaling process if required.
• The green LED shows that OUTPUT 1 is active.
• The blue LED shows that OUTPUT 2 is active.

Troubleshooting

– The correct connection of all cables

– That the correct channel has been set on the output device

– That all devices are switched on

No sound| Check that all devices are properly connected and switched on.

Care and maintenance

Only clean this product using a lint-free, slightly damp cloth, and do not use any harsh cleaners.

Warranty Disclaimer

• Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.

Technical data

CONTACT

• Hama GmbH & Co KG
• 86652 Monheim/Germany
• Service & Support
• www.hama.com.
• +49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied. 00205284/03.24

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>