hama 2K176613 WiFi Indoor Camera Instruction Manual
- June 2, 2024
- Hama
Table of Contents
**hama 2K176613 WiFi Indoor Camera Instruction Manual
**
Operating Instructions
Controls and displays
A: Front
1| Status LED
2| Microphone
3| micro-SD card slot
4| Reset
B: Reverse
5| Loudspeaker
6| Micro-USB
Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated
product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- 1 WiFi PT camera
- 1 power supply unit for camera
- 1 mounting kit
- 1 micro USB cable
- 1 quick reference guide
Safety instructions
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- This product is intended for private, noncommercial use only.
- Use the product only for the intended purpose.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Do not use the product in areas in which electronic products are not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not operate the product outside the power limits given in the specifications.
- Only use the article under moderate climatic conditions.
- Do not mount the product above locations where persons might sit or stand.
- Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
- Pay attention to the applicable data protection regulations before installing and using the product.
- Respect the personal and property rights of others. Do not make recordings of other people with the camera.
- Observe the right to one’s own image and spoken word when recording.
- As with all electrical products, this device should be kept out of the reach of children.
- The product is intended only for use inside buildings.
- Do not bend or crush the cable.
- Do not use the product in a damp environment and avoid splashing water.
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Product characteristics
Our WiFi indoor camera is used to monitor the area in which you install it. You can use the Hama Smart Home app to access the images of the monitored location conveniently at any time.
- The following voice commands are available for voice assistants with a display (Amazon Echo Show, Google Nest, etc.): “Alexa/OK Google, show me camera (plus the name of the camera you have defined)”
Installation
- You can secure the camera into place using the mounting kit supplied.
Warning – mounting kit
- Do not mount the product above locations where persons might sit or stand.
- Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
- . Integrating devices into the Hama Smart Home app
Warning
- Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
- If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the socket strip’s maximum throughput rating.
- If you will not be using the product for a prolonged period, disconnect it from mains power.
Download the app
- Download the Hama Smart Home app from the Apple App Store or Google Play Store.
- Open the Hama Smart Home APP
- The first time you use the app, you need to register and create a new account. If you already have an account, log in with your access details.
- Follow the instructions in the app.
Note
A detailed description of the Hama Smart Home App and its full scope of functions can be found in our App Guide at:
www.hama.comðArticle Number ðDownloads ð App Operating Instructions.
-
Connect the camera to a properly installed socket.
-
The LED on the camera starts to flash quickly. If it does not, press and hold the Reset button (4) on the camera for around 5 seconds.
-
Open the app and sign in.
-
Press the + in the top right-hand corner to add a new device.
-
Choose Cameras from the list.
-
Now confirm that the camera’s LED is flashing quickly by ticking “Next step” and clicking on “Next”. Ensure that the QR code is at the top right.
-
Next enter your WiFi password and confirm with NEXT. Now scan the QR code with the camera from a distance of around 15 – 20 cm.
-
As soon as you hear a signal sound, click “Signal sound heard”.
-
Your camera is now connected.
-
Once the connection is successful, the LED stops flashing quickly and the app confirms that your camera is connected. You can now assign it a different name if you wish.
-
Click Finish to end the process.
-
You can now operate and configure the camera.
Note: Pairing restart Swivel the camera to the highest position. Now press the Reset button until a signal sound is heard. As soon as the LED starts to flash red, you can start a further pairing attempt.
Setting options
The following settings can be made in the app:
1 | Play back video recordings from your gallery. |
---|---|
2 | Open the photo album and view all of the images captured. |
3 | Switch between dark and light mode. |
4 | Switch the camera off. |
5 | When it gets dark, the camera automatically switches to infra-red / |
night vision mode.
6| Activate / deactivate movement tracking on the camera.
7| Activate / deactivate motion detection.
8| Activate / deactivate sound recognition.
9| Retrieve this device’s messages and alarms.
10| Control or swivel function on the camera.
11| Call up the data from your cloud storage here.
12| Recording Quality HD (High Definition: 1.280 x 1.080) or SD
(Standard Definition: 720 x 576)
8. Extended usage options with scenarios
Scenarios and automated sequences that can be created in the app allow various
combination options and usage options for these products, depending on the
SmartHome products in your home.
Programming is always via the app (see Section 7 of the App Guide) and will be
offered / suggested to you on an individual basis.
Standard usage option
**Extended usage option
**
Technical data
Power supply | 5 V 1 A |
---|---|
Frequency band | 2.4 GHz |
Maximum radio- frequency power transmitted | **** < 100 mW |
Specifications according to Regulation (EU) 2019/1782
Brand name, commercial register number, address| Hama, HRA12159,Dresdner Str.
9,86653 Monheim
Model identifier| DCT07W050100EU-C1
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage / output current / output power| 5.0 V DC / 1.0 A /5.0 W
Average efficiency during operation| 73.6 %
Efficiency at low load (10%)| 63.9 %
Power consumption at zero load| 0.09 W
Care and maintenance
Note
Disconnect the product from the mains before cleaning and during prolonged
periods of non-use.
-
* Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
- Ensure that no water is able to enter the product.
-
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes. -
RF exposure information
This device complies with the EU requirements for limiting the exposure of the general public to electromagnetic fields by means of health protection. The device complies with RF specifications provided it is used 20 cm away from the body. -
Declaration of conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [2K176613] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->2K176613 ->Downloads
Link to App
https://link.hama.com/app/smart-home
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>