XGODY X1 4K Supported Projector User Manual

XGODY X1 4K Supported Projector User Manual

For more questions, please consult online customer service.

Notice: Please read this user manual carefully before use.

Important Safety Notes

For the best viewing effect, please use the projector in dark room.

1. Do not Install this projector in the area which directly blown by the air conditioner, to prevent projector failed caused by water vapor condensation or excessive temperature.
2. Ensure that the environment is ventilated to prevent overheat caused by heats build-up.
3. Prevent foreign objects from falling into the machine. Never insert any metal objects into the machine. If foreign objects fall into the machine accidentally, please power off immediately and seek professional assistance.
4. Do not place any liquid on the machine to avoid leakage.
5. Avoid violent vibrations when transporting. Please protect the lens from wear.
6. Do not touch the vents when using the projector to avoid burns due to excessive temperature.
7. Do not look directly at the lens while the projector is running to prevent eye injury.
8. Please clean the filter regularly to prevent malfunction caused by clogging.

Notice
Do not open the case of projector to prevent electric shock.
Please seek professional assistance for maintenance matters.

****Do not touch The inside of the projector contains insulated voltage

Warm
Do not install the projector around flammable objects to prevent fire. Please use 3C-certifled power adapter for charging.

To ensure the performance and stability of the projector, please place it horizontally and leave a space of about 30cm between the projector and the wall.

Projector Accessories

Notice: Do not look directly at the lens to prevent eye lnJuryl 3

Remote Control Button Function

Voice pairing method

1. Press and hold the left & right direction buttons at the same time for 3-5 seconds untill the red light flashes.
2. Open Settings – Remote Control & Accessories – click the name of the Voice Assistant to connect (as shown in the pictures)

Due to the continuous updates of the design, the appearance of the machine may be slightly different from that shown in above pictures. please refer to the actual product.

Power-On/Off Operation

Projection Distance Reference & Screen Adjustment

Warn: The machine filter and air outlet must not be blocked or too close to the wall. Clean the filter regularly every month to prevent clogging.

Connection settings

1. WiFi connect ( For Android device and Cast device )

1. Open Settings – Network & WiFi ( picture 1 ) to enter the WiFi settings page ( picture 2 )
2. Choose the WiFi option and enter passwords to connect .

Tips:

1. Click ” > ” in software keyboard to connect WiFi after passwords entered.
2. If the pop-up window of “Problem with Authentication” appears, it means that the password is incorrect. If the pop-up window of “Saved”, it may be that the router’s WiFi settings are limited. It is recommended to check as follows:
   A Turn off the WiFi for seconds and turn on again to connect.
   B. Reboot the router and connect again, try to reduce the connected devices.
   C. Connect to the mobile phone hotspot to check if the projector WiFi work properly.

HDMI & Bluetooth Connection

HDMI connection

1. Press the “Switch” button on projector or the  signal button of remote to choose the signal source.  ( As picture 1 ).
2. On home page, select [Signal Source ]  to source menu [Settings]> [Signal Source ].

Picture 1

2. Bluetooth connection

1. Connect to Bluetooth speakers and Bluetooth  earphone: [Settings] >Remote Control & Accessories [Add Accessories ], open Bluetooth  of your device, connect them.
2. Bluetooth speaker(see projector as a Bluetooth speaker): [Settings] >Bluetooth Speaker 1, follow tips on the screen to connect to your phone.

Screen Cast for Android Phone

( support Android 5.3 and above )

1. Open “Miracast” App as below picture. Local device  name is “Android

2. Open the Wireless Cast on Android phone to search  available devices, click the “Android XXXX” option to  connect.
3. Click on the prompt box to accept the screen cast  connection. If the screen is synchronized, means screen cast completed.

Wireless Screen Mirroring for iPhone

1. Please ensure the iOS device and projector connected to  the same network.
2. Select LCast1 Open [iOS Cast]

3. Open the Screen Mirroring from the control center on iPhone.
4. Search for available devices.
5. Connect to “ByteFly-XXXXXX” option to start mirroring screen.

Filter Cleaning

1. Filter Cleaning

Pull out the filter and clean the dust on it, then install it back.

Projector Common Troubleshooting

1. Remote control is insensitive or unresponsive

• Please check if the batteries installed properly.
• Please replace with new batteries.
• Please aim the remote control to the projector to operate.

2. Unable to boot up
Please check if the power cord is connected properly, and  if the power light is on. Try to unplug and plug the power  if the projector still cannot boot up.

3. Black screen or abnormal picture after booting for a while

• Please check if the vents are blocked.
• Please check if the cooling fan is working properly. If  abnormal, please return for repair.
• Please try to reboot the projector.

4. No network connection
Please check if WiFi connected properly, and if the WiFi  signal is good.
Please connect hotspot of smart phone to verify if router  is working properly.

5 Blurry display
Please check if the lens are clean.
Please use the focusing ring to adjust the sharpness.
Please check if the environment too bright.

Warranty Card

1. This projector supports Three Guarantees Service. Warranty  for 1 year from the date of purchase. (non—artificial damage).

2. Within warranty, we support warranty service for any failures  caused by product technology.

3. The following situations are not covered by the warranty:
   – Accessories except the projector.
   – Products that have been disassembled and repaired without  permission.
   – Damage caused by external force and other natural disasters.

4. When the product fails, please contact the dealer or supplier in  time to arrange for repair with this warranty card.

5. This warranty liability is limited to product failure repairs within  the warranty period.

If you have any further enquirers or need any further assistance,  please contact us:

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>