WEVER DUCRE CENO LED Track Light Instruction Manual

June 2, 2024
WEVER DUCRE

WEVER DUCRE CENO LED Track Light

WEVER-DUCRE-CENO-LED-Track-Light-product

Product Information

Specifications

  • Dimensions: 115mm x 171mm x 55mm
  • Power: 1.0 DALI / 2.0 DALI
  • Installation Location: Only to be installed outside arms reach

Product Usage Instructions

Mounting Instructions

  1. Push the fixture into the track at the preferred location.
  2. Warning: Do not slide the fixture in the track. To change the fixture’s location, pull it out and reinstall it in the correct position.

Dismounting and Recycling Instructions

  1. Pull out the lens cover.
  2. Take out the lens and unscrew the light source to remove it.
  3. Unscrew the top screws and remove the lid.
  4. Disconnect the wires and remove the driver’s PCB.

This luminaire contains a light source with energy class E.

Frequently Asked Questions (FAQ)

  • Q: Can the fixture be installed indoors?
    A: No, the fixture should only be installed outside arm’s reach.

  • Q: How do I change the location of the fixture in the track?
    A: Pull the fixture out of the track and reinstall it in the correct position, do not slide it.

DIMENSIONS

WEVER-DUCRE-CENO-LED-Track-Light-fig-
\(3\)

MOUNTING INSTRUCTION

WEVER-DUCRE-CENO-LED-Track-Light-fig-
\(1\) WEVER-DUCRE-CENO-LED-Track-Light-fig-
\(2\)

Push the fixture into the track at the preferred location.

Note : it’s not allowed to slide the fixture in the track. If you want to change the location of the fixture in the track, please pull the fixture out of the track and install it on the correct position.WEVER-DUCRE-CENO-LED-
Track-Light-fig- \(4\)

INSTALLATION INSTRUCTIONS

WEVER-DUCRE-CENO-LED-Track-Light-fig-
8

  • DISMOUNTING AND RECYCLING INSTRUCTIONS Light source & driver Pull out the lens cover.
  • Take out the lens and unscrew the light source to remove it.
  • Unscrew the top screws and remove the lid.
  • Disconnect the wires and remove the driver’s PCB.
  • The driver is replaceable by an authorized professional.
    • For advice contact your Wever & Ducré customer service contact point.
  • The light source is replaceable by an authorized professional.
    • For advice contact your Wever & Ducré customer service contact point.

This luminaire contains a light source with the energy class E.
WEVER & DUCRÉ BV
Spinnerijstraat 99/21, 8500 Kortrijk, Belgium weverducre.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals