WEVER DUCRE PLANO 1.0 LED Bronze Recessed Lamp Bronze Instruction Manual
- June 2, 2024
- WEVER DUCRE
Table of Contents
WEVER DUCRE PLANO 1.0 LED Bronze Recessed Lamp Bronze
DIMENSIONS
MOUNTING INSTRUCTION
-
Make a hole in ceiling according to the prescribed dimensions.
-
POWER CONNECTION
- SERIAL CONNECTION – for LED Always use POWER SUPPLY according to the specifications of the LED-module
PARALLEL CONNECTION – for PAR16
- SERIAL CONNECTION – for LED Always use POWER SUPPLY according to the specifications of the LED-module
-
Insert the fixture in the hole by pushing up the springs.
-
Place the lamp or LED engine in the fixture and fix it with the spring clip.
INSTALLATION INSTRUCTIONS
DISMOUNTING AND RECYCLING INSTRUCTIONS Light source
- Push in the slot of the spring clip and pull it out.
- Unplug the LED module to remove it from the luminaire.
- Push at the three points to loosen the front ring.
- Take the components out to remove the light source.
This luminaire contains a light source with the energy class D
weverducre.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>