WEVER DUCRE PIRRO SURFACE Celling Light Instruction Manual
- May 15, 2024
- WEVER DUCRE
Table of Contents
WEVER DUCRE PIRRO SURFACE Ceiling Light
Product Information
Specifications
- Model: PIRRO SURFACE
- Voltage: 220-240V
- Energy Class: E
- Manufacturer: Wever & Ducre
Product Usage Instructions
Mounting Instructions
- Remove the mounting base from the luminaire by loosening the socket screws.
- Mount the base on the ceiling using screws (not included).
- Power Connection:
- Connect to a power source of 220-240V.
- Connect the ceiling base earth cable.
- Fix the luminaire on the base with the socket screws.
Dismounting and Recycling Instructions
- Unscrew the socket screws on the side and pull down the luminaire.
- Remove the driver by loosening the screws and wires.
- Remove the back plate inside the fixture by loosening the screws.
- Remove the light source from the back plate by loosening the screws. The driver can be replaced by the end user.
Frequently Asked Questions (FAQ)
Q: How do I replace the light source in the luminaire?
A: To replace the light source, follow these steps:
- Unscrew the back plate inside the fixture.
- Loosen the screws holding the light source in place and remove it.
Q: What is the energy class of the light source in this luminaire?
- A: The light source in this luminaire has an energy class E.
INSTALLATION INSTRUCTIONS
- installation for 1.0 / 2.0 / 4.0 / 6.0
- installation for 4.1
DIMENSIONS
Mounting base:
DIMENSIONS
MOUNTING INSTRUCTION
- Remove the mounting base from the luminaire by loosening the socket screws and mount it on the ceiling with screws (screws are not included).
- POWER CONNECTION Connect to 220-240V.
- Connect the ceiling base earth cable.
- Fix the luminaire on the base with the socket screws.
DISMOUNTING AND RECYCLING INSTRUCTIONS
Light source & driver
- Unscrew the socket screws on the side and pull down the luminaire
- Remove the driver by loosening the screws and wires.
- Remove the back plate inside the fixture by loosening the screws.
- Remove the light source from the back plate by loosening the screws.
- The driver can be replaced by the end user.
- The light source is replaceable by an authorized professional.
- For advice contact your Wever & Ducré customer service contact point.
- This luminaire contains a light source with the energy class E.
- WEVER & DUCRÉ BV
- Spinnerijstraat 99/21, 8500 Kortrijk, Belgiumweverducre.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>