benefit TOA381 Bluetooth Speaker User Manual
- June 2, 2024
- benefit
Table of Contents
NAME:SHUNMIAO TANG
DATE:8/22/2023
1st round of prototypes
TOA381 Bluetooth Speaker – Manual
Radio with Bluetooth Technology
INFOCOMM MEDIA DEVELOPMEN AUTHORITY
PACKAGE CONTAINS:
a. Radio X 1
b. USB charging cable X1
c. Manual X 1
PRODUCT SPECIFICATION:
BT Version: V5.0
Working Distance: Up to 10m
Voltage: DC 5V
Battery Charge Time:6-10H
Loudspeaker:4Ω5w
S/N Ratio:≥95db
Frequency Response: 120HZ-16KHZ
Dimension: 14310153mm
Net Weight: 320g
Made in China
INSTRUCTIONS:
FM RADIO MODE
Plug in the micro USB cable in to the micro USB port. Short press the Mode button to go to the FM Radio mode. After entrance into FM radio mode, short press Play/Pause button for searching an available channel. Press + or — button to go to the next frequency.
TF CARD
Insert TF card into the TF card slot, the speaker can play the song inside. Support format: WAV/WMA/MP3,etc.
BLUETOOTH MODE
Toggle ON/OFF key to start the power of the speaker, search Bluetooth name”BS- 32D” equipment after the priming music. Confirm match and connection with the speaker, you can use it to play music.
GUIDE:
1.TOP OF THE RADIO
a. MODE SWITCHING:
BULETOOTH MODE/TF MODE/FM MODE
b. QUICK PRESS:LAST SONG
c. PRESS & HOLD: VOLUME DOWN
d. QUICK PRESS:NEXT SONG
e. PRESS & HOLD: VOLUME UP
f. PRESS ONCE:PLAY/PAUSE
g. PRESS TWICE:CALL-BACK
2.BACK OF THE RADIO
ON: Turn on the radio switch the power ON/OFF button to the left.
OFF: Turn on the radio switch the power ON/OFF button to the right.
MICRO USB CHARGING PORT
USB FALSH DRIVER PORT
TF CARD SLOT
WARNINGS:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not be exposed to excessive heat such as sunshine, fire or the like.
No naked flame sources such as lighted candles should be placed on the apparatus.
The radio shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the radio.
Do not place any heavy objects on top of the unit.
Only use attachments/accessories specified by the manufacturer.
Never use the unit where it would be subject to mechanical vibration or shock.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guaran tee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>