ZEBRONICS ZEB Escape 10 Wireless Neckband Earphone User Manual
- June 2, 2024
- ZEBRONICS
Table of Contents
Wireless Neckband Earphone
ZEB/ESCAPE1O
User Manual
www.zebronics.com
ZEB Escape 10 Wireless Neckband Earphone
Thank You for purchasing ZEB ESCAPE 10 wireless neckband earphone.
Please read this user manual carefully before operation & save it for future
reference.
Note:
- Please full charge the product with a power adapter output rated DC SV before first time usage.
- Avoid the self-disassembly the product or it results in the voiding the product’s warranty.
To know more about Terms and conditions for warranty policy, please visit https://zebronics.com/pages/warranty-policy
Caution:
Listening at high volume can cause hearing impairment. Please limit your usage
time at high volume.
Features
Wireless BT earphone with Neckband
Volume/Media Control
Magnetic Earpiece
Call Function
Voice Assistant support
Built-In Rechargeable Battery
Specifications
| BT Version | :vS.3 |
|---|---|
| BT Profile | : HSP / HFP / A2DP / |
AVRCD
Drive size| : 10mm
Speaker impedance| : 16
Playback time| : 20 h
Charging time| : 1.5 h
Talk time| : 20h
Standby time| : 200 h
Net. weight| : 27g
Package contents
Neckband :1 U
Charging Cable :1 U
QR Code Guide :1 U
Product Representation
-
+ Button
Short press: Volume up
Long press: Next track -
MFB Button
Single press: Play/ Pause
Press and hold for 3 second s: Voice assistant
Long press and hold: Power On/ Power off
When calling (MFB Button on Middle):
Single press : Accept/ End the ongoing call
Double press : Direct incoming Call rejection
Double press: Redial -
– Button
Short press: Volume down
Long press: Previous track
Usage Instruction
Bluetooth Pairing Instructions:
STEP 1 – Press and hold the MFB button to power ON the earphones.
STEP 2 – Switch ON the BT in your mobile phone & search for the BT name
“ZEB ESCAPE 10”
STEP 3 – Once the BT name is visible in your mobile phone, tap to connect
it.
Activating Smart Phone’s Voice Assistant When the neckband is connected to a mobile phone, Press and hold the MFB Button for 3 seconds to activate voice assistant. Note: Smart phone should have an active internet connection to use the voice assistant function.
Call Function:
- Single press the MFB button to attend/ end the Call and Double press to reject the incoming call.
- Double press the MFB button for Redialing.
Led Indication
1| Charging the Neckband| Red light glows-(charging)
Blue Light Glows – Fully charged
---|---|---
2| BT pairing| Red and blue blinks – BT discovery mode
Blue blinking – BT paired successfully
3| Power on / off| Blue Blinking while power On
Red Blinking while power Off
Charging Instruction
Connect the Type-C charging cable to the charging port of the Neckband & connect the other end to the DC SV adapter.
ISO 9001:2015 Certified Company
www.zebronics.com