G G GG-PP023 Mini Pocket Photo Printer Instruction Manual
- June 5, 2024
- G G
Table of Contents
G G GG-PP023 Mini Pocket Photo Printer
Operation Instruction
Supplied Items
- Us your mobile phone to scan the CR code sub that searches for “G&G PI OTO’ in the app store, download and installs the app
Loading Paper
- Step 1: Remove the cover by siding it towards.
- Step 2: Load the paper as shown make sure the blue sheet with the barcode is facing down.
- Step 3: Cose thee cover.
How to Print
- Press the Power Button for 3 seconds.
- Open the” G&G PHOTO “APP.
- Select photos and go to Print Preview
- CHck the Print I can to turn on Bluetooth
- Select your printer from the list to pair your devices automatically.
- Click the Print I can again to start printing.
LED Indicator Status
Warranty Card
- Please stick the barcode label here.
- This product is warranted against defects in materials and workmanship for a period of ONE
- YEAR rom the date of purchase. If a defect arises during the Warranty Period, the Manufacturer will repair the Product at no charge.
- This warranty shall not apply in the event of
- Any damage caused by misuse, misapplication of electricity, malicious acts, negligence, the inflow of any liquid or dirt, or accident. natural calamities, or physical force.
- Any willful modification. alteration or repair in any way made to any part of the product by any persons other than the Company
- Products that are not operated performed in conformity with the most updated and auth prized instruction manual that are published by the manufacturer.
- No valid sales inv once receipt and warranty card.
- Any alteration to this Warranty Card or the actual product does not match this Warranty Card.
- All changed parts during the warranty period are non-returnable.
- The customer will be requested to send the defective product to an authorized service center.
- Nine-star Corporation has the final right to interpret these terms.
Environmental Parameters
- Operating temperature: 5 o-35°C
- Operating humidity: 5%-7O% RH Storage temperature-20*C-70°c
Photo Paper Caution
- Please uses the photo paper as soon as possible as it is moisture sensitive.
- Recommend using G&G Zink Photo Paper for the best results.
- Avoid direct sunlight and low temperature
- Do not fold or damage the paper,
- Storage temperature:-10t-25T.
- Storage humidity: 40%-55% RH
- Transportation temperature: 40Cfor 5 days, 60 C for 1 day, more than 70C.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices. pursuant to Part 15 of the FCC Rules.
These Imits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Compatible device
Applicable models
Made for iPhone 13 Pro Max, 1Phone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro. iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad (9th generation), iPadmini (6th generation), iPad Pro 12.9inch (5th generation), iPad Pro 11inch (3rd generation), iPad (Bth generalion), iPad Air (4lh generation), iPad Pro 11-inch (2nd generation), iPad Pro 12.9-inch (4Uh generation). IPad Pro 11Hnch, IPad Pro 12.9-Inch (3rd generation). IPad Pro 10,5-inch. IPad Pro 12.9-inch (2nd generation), IPad Pro 9,7-inch. IPad Pro 12,9-inch (1st generation), IPad Air (3rd generation), IPad Air 2, IPad Air, Pad mini (5th generation), iPad mini 4, iPad mini 3, IPad mini 2, IPad (7th generation), iPad (6th generation), iPad (5th generation)
Legal Notices
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to, the Apple product (s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with] safety and regulatory standards Please note that the use of this accessory with an Apple product may affect wireless performance.
Credit terms: Apple, iPad, iPad Air, iPad Pro, and iPhone are trademarks of Apple lInc, registered in the U, S, and other countries, as is a trademark of Apple Inc,
Zhuhai Ninestar Information Technology Co., LTD
- Address: No.3883, Zhuhai Avenue, Xiangzhou District, Zhuhai Guangdong PR.China 519060
- Website : www.ggimage.com