Bettermade 122CM Firewood Rack with Protective Cover Instruction Manual

Bettermade 122CM Firewood Rack with Protective Cover

DIMENSION

• 48“ x 14“ x 48“ (122×35.5x122CM)

RECOMMENDED TOOLS

Please read the instructions COMPLETELY before assembly.
Before you start: 1 or more individuals are recommended for assembly.

Important!
Please read the instructions COMPLETELY before assembly.

ATTENTION
This product is manufactured with quality materials. Firewood Racks offer storage and protection from damage caused by the environment. Please read and understand the warnings and cautions before assembly. If you have any questions call the customer service number. is not responsible for damage to the unit or the contents from acts of nature.

DANGER
Choose the location of your firewood rack carefully. DO NOT install on, over or near electrical wires or outlets. Check for roof lines or other structures that could shed snow, ice or excessive run off before positioning the firewood rack.

WARNING
Risk of fire. Do not smoke or use open flame devices in or around the rack. DO NOT store flammable liquids (gasoline, kerosene, propane, etc.) in or around your rack. Do not expose the top or sides of the rack to open fire or other flame source. DO NOT overstack wood. DO NOT stack wood beyond the height of the end pipes.

CARE AND CLEANING

Immediately remove any accumulated snow or ice from the fabric with a broom, mop or other soft-sided instrument. DO NOT use hard-edged tools or instruments like rakes or shovels to remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to clean the fabric cover. Cover is easily cleaned with mild soap and water

Questions? Comments? Claim 1-year warranty?
Reach out to us to get expert support!
support@btrmade.com

Package Contents

Package List

Main Unit

• (A) Slender Rod x1
• (B) U-shaped Strengthening Tubes x2
• (C) Curved shape tube x2
• (D) Strengthening Tube x2
• (E) M6 Bolts x8
• (F) M6 Nuts x8
• (G) Protective Cover x1

Assembly Steps

• Step-1 (Main frame installation)
  • Install (C) Strengthening Tube x1 and (D) Strengthening Tube x2 to the (B) 1x U-shaped Strengthening Tubes with (E) 4xBolts and (F)4xNuts.
• Step-2
  • Install another (C) Strengthening Tube to the the last one(B) U-shaped Strengthening Tube with (E) 4xBolts and (F)4xNuts.(as shown below).
• Step-3
  • Attach the (A) Slender Rod on the main frame, The firewood rack is finished.
• Step-4 (Installation of Protective Cover)
  • Place the (F) Protective Cover from top to bottom on the firewood rack, Hang the plastic hook from the (F) Protective Cover shield on (A)Slender Rod

The fabric is a strong, waterproof canvas.
The sturdy clip it opens easily and closes quickly, and is designed to stay still in high winds

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>