Bettermade 32 Inch Outdoor Fire Pit Instruction Manual

Bettermade 32 Inch Outdoor Fire Pit

Product Information

Specifications:

• Product Name: Outdoor Fire Pit 32-Inch
• Package Contents:
  • (A) Cooking Grill x1
  • (B) Circular Cooking Grill Part x4
  • (C) Fire Bowl x1
  • (D) Stand Legs x3
  • (L) Charcoal Grill x1
• Accessories:
  • (I) Poker x1
  • (J) Support the iron pipe for Cooking Grill x1
• Hardware:
  • (E) M6 12mm Bolts x28
  • (F) M6 Nuts x18
  • (G) M6 35mm Bolts x2
  • (H) Bolt for iron pipe x1
• Tools:
  • (K) M6 Allen Key x1
  • (L) Wrench x1

Product Usage Instructions

Assembly Steps:

• Step 1:
  Install (D) Stand Legs x3 to the (C) Firebowl with (E) 12x M6 Bolts.

• Step 2:
  Put the assembled (B) Circular Cooking Grill install to the (C) Firebowl with (E) 8x M6 Bolts and (F) 8x M6 nuts.

• Step 3:
  Connect 4 (B) Circular Cooking Grill Part with (E) 8x M6 Bolts and (F) 8x M6 nuts.

• Step 4:
  Line up the hole on the (J) Support the iron pipe with (C) Fire Bowl. Secure it using the (G) 2x M6 35mm Bolts and (F) 2x M6 nuts.

• Step 5:
  Adjust to your desired height and then insert the (H) Bolt for iron pipe to secure it in place. Put the (L) Charcoal Grill and (A) Cooking Grill onto the (J) Support the iron pipe.

FAQ:

• Q: How do I care for and maintain the outdoor fire pit?
  A: It is important to cover and protect the fire pit structure during the off-season to prevent damage from weather elements.

• Q: How can I claim the 1-year warranty?
  A: For any questions, comments, or to claim the 1-year warranty, reach out to us at support@btrmade.com for expert support.

IMPORTANT SAFETY INSTRUCTION

Please read and follow all instruction before assembling or using this product, particularly the safety statement. Failure to follow instruction and warnings could result in damage, serious injury or death.

Caution

• Outdoor use only, never use in enclosed area, use in unventilated areas will endanger your life.
• Don not use this unit on or near combustible surfaces or structure such as wood desks, dry leaves or grass, vinyl or wood siding etc.
• Use on level non-combustible surface only.
• Keep away from all combustible materials including gasoline and other flammable accelerants, such as gasoline, alcohol, paint thinners, Kerosene and etc. to start a fire. Series injury or property damage could result.
• Screen lifting tool may become hot when in use, failure to wear protective gloves may lead to injury.
• Always wear fire resistant gloves when handling hot metal screen and lifting tool.

Warning

• Keep away from house, garage, balconies or overhangs.
• Avoid using during dry or windy conditions.
• Keep out of reach of children.
• Do not overfill or use to burn leaves or trash.
• Exercise the same care you would with an open fire.
• Never leave unit unattended while hot or in use.
• Completely extinguish fire before leaving.
• Ashes can remain hot for a long time after fire is extinguished.
• Dispose of cold ashes properly.
• Contact local authorities regarding possible burn restrictions before using product

Care and Maintenance

• To extend the life of your fire pit, clean the bowl after each use and cover the unit to protect it from the elements.
• To maintain the coating color, cover the bottom of the fire bowl with small stones or sandstones before each use.
• To maintain the finish, clean the surface by using a soft cloth. Do not use a metal brush.
• If metal is scratched, the fire pit may need touch up painting. Ask your local paint store representative which paint is best for your type of fire pit.
• To prevent rusting, coat the exposed surface immediately.
• Although fire pits in general do well in adverse weather conditions, store it in an enclosed structure during the off-season.

Questions? Comments? Claim 1-year warranty?
Reach out to us to get expert support!
support@btrmade.com
Follow us on:

Package Contents

Main Unit

• (A) Cooking Grill x1
• (B) Circular Cooking\ Grill Part x4
• (C) Fire Bowl x1
• (D) Stand Legs x3
• (L) Charcoal Grill x1

Accessories

• (I) Poker x1
• (J) Support the iron pipe for Cooking Grill x1

Hardware

• (E) M6 12mm Bolts x28
• (G) M6 35mm Bolts x2
• (F) M6 Nuts x18
• (H) Bolt for iron pipe x1

Tools

• (K) M6 Allen Key x1
• (L) Wrench x1

Assembly Steps

• Step-1
  Install (D) Stand Legs x3 to the (C) Firebowl with (E) 12x M6 Bolts.

• Step-2
  Put the assembled (B) Circular Cooking Grill install to the (C) Firebowl with (E) 8x M6 Bolts and (F) 8x M6 nuts.

• Step-3
  Connect 4 (B) Circular Cooking Grill Part with (E) 8x M6 Bolts and (F) 8x M6 nuts.

• Step-4
  Line up the hole on the (J)Support the iron pipe with (C)Fire Bowl. Secure it using the (G) 2x M6 35mm Bolts and (F) 2x M6 nuts.

• Step-5

  • Adjust to your desired height and then insert the (H) Bolt for iron pipe to secure it in place.
  • Put the (L)Charcoal Grill and (A) Cooking Grill onto the (J) Support the iron pipe.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>