LIGHTINOVA TUUB Pendant Lamp 400 mm Instruction Manual
- June 2, 2024
- LIGHTINOVA
Table of Contents
LIGHTINOVA TUUB Pendant Lamp 400 mm
Specifications
| IP Rating | IP20/54 |
|---|---|
| Voltage | 24V |
| Safety Class | SELV |
Attention: Please Read the Instructions
The safety of this product can only be guaranteed if the installation
instructions are respected and carried out by a qualified professional.
Always disconnect the power before installation. Do not attempt to make
any modifications on the products. Lightinova declines any responsibility on
modified products. Installation should be carried out by a qualified
professional. This product is designed for indoor installation.
Maintenance: Clean with a soft cloth, possibly moistened with soap and
water. Do not use alcohol and/or solvent.
If any steps in the installation instructions are unclear, please contact us
- Tel: +31 (0) 76 369 00 24
- E-mail: support@lightinova.com
- Website: www.lightinova.com
Dimensions and Diagrams
The dimensions provided are as follows
| Dimension A | 250mm diameter, 400mm height |
|---|---|
| Dimension B | 250mm diameter, 400mm height |
| Total Suspension Length | 1200mm |
Ceiling Mount Diagram
A circular ceiling mount with multiple entry points for wires, a central
hole and two side screws. Dimensions are marked as 36mm from center to side
screw and 10mm from top to central hole, with a 15mm distance from the edge to
the side screw.
Installation Process
- Ensure the power switch is in the OFF position.
- Connect the power cables to the driver, securing them in place.
- Attach the suspension cable to the mounting bracket using the provided hardware.
- Wire the driver to the ceiling mount, ensuring a secure connection.
- Insert the driver into the cylindrical housing.
- Attach the cylindrical housing to the suspension cable, ensuring it is properly secured.
- Adjust the length of the suspension cable if necessary, allowing for a range of 0-35mm of adjustment
ATTENTION : PLEASE READ THE INSTRUCTIONS
- The safety of this product can only be guaranteed if the installation instructions are respected and carried out by a qualified professional.
- Always disconnect the power before installation. Do not attempt to make any modifications to the products.
- Lightinova declines any responsibility for modified products. Installation should be carried out by a qualified professional.
- This product is designed for indoor installation.
Maintenance
-
* Clean with a soft cloth, possibly moistened with soap and water.- Do not use alcohol and/or solvent.
If any steps in the installation instructions are unclear, please contact us
- tel. +31 (0) 76 369 00 24
- e-mail support@lightinova.com
- www.lightinova.com
FAQ
Q: What should I do if I’m unsure about a step in the installation?
A: If any steps in the installation instructions are unclear, please
contact Lightinova for assistance using the provided contact information.
Q: Can I install this product outdoors?
A: No, this product is designed for indoor installation only.
Q: Is it safe to clean the product with alcohol?
A: No, do not use alcohol and/or solvent. Only use a soft cloth possibly
moistened with soap and water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>